KnoxGear KN-PAS01 User manual

2
• This product contains no user-serviceable parts. All servicing must
be performed by a qualiied technician.
• Connect the product only to a properly grounded outlet with an
appropriate power supply.
• Do not remove the cover of this product; doing so increases risk of
electric shock.
• Do not expose the product to high temperatures, moisture, or
electricity.
• Do not use the product near exposed lames.
• The maximum operating temperature is 113° F.
• Clean with a dry cloth only.
• Unplug the product when not in use.
• To establish a safe volume level, start the volume at the lowest
setting and slowly increase it until you can hear the sound
comfortably, clearly, and without distortion.
• Use a suitable means of transportation when moving the product.
SAFETY INSTRUCTIONS
• Once a Bluetooth device has been paired, there is no need to pair it
again.
• If the speaker is connected to a Bluetooth device and there is no
sound, turn off all nearby devices and allow only one device to
connect with the speaker.
• Always ensure that USB/SD cards are inserted correctly and in the
proper direction. To avoid damage, always insert cards gently.
• Before turning off the speaker, remove the USB/SD card.
USAGE TIPS

3
• All-in-one DJ audio loudspeaker kit
• 8-channel powered ampliier audio mixer
• Dual molded cabinet PA speakers
• Sound system: 2 x 8” speakers, 2 x 1” tweeters
• Bluetooth wireless music streaming capability
• Instantly receives wireless streaming audio
• Works with smartphones, tablets, MP3 players, and other
devices with Bluetooth functionality
• Active two-way, full-range stereo sound
• MP3 digital audio ile support
• USB lash and SD memory card readers
• +48 V phantom power
• 4 x XLR 3-pin connectors
• 2 x ¼” microphone/guitar inputs
• Independent adjustable channel controls
• Treble, bass, effects, and volume coniguration
• 5-band graphic equalizer
• Digital echo effects control
• RCA (L/R) audio line input/output jacks
• Universal speaker stand mount support, 35 mm
• Rugged, heavy-duty molded cabinet housing
• Ability to connect additional microphones, instruments, DJ
equipment
• Convenient system design allows quick setup and disassembly
• Perfect for onstage performances, crowd control, and public
gatherings
PRODUCT FEATURES

4
CONTROL PANEL
32
1
11
12
13
15
16
17
19
20
21
18
14
4
5
6
7
8
9
10

6
9. Effect Knobs: Channels 1-4 have individual effect controls per channel. Use
this knob to adjust the reverb effect levels for the selected channel.
10. Volume Knobs: Channels 1-4 have individual volume controls per channel.
Use this knob to adjust the volume levels for the selected channel.
11. 1/4” Line Input: Connect your sound source to this 1/4” input. The line
volume is controlled by volume control channel 5/6 and the master volume
knob. Only passive signals should connect to this input.
12. RCA Line Input: Connect your sound source to this RCA input (channel 6/7).
Only passive signals should connect to this input.
13. RCA Line Output: Use this connector to connect another ampliier. DO
NOT connect directly to a passive speaker.
14. Line/MP3 Selector: When you use USB/SD Bluetooth signal push the
selector down. When you use Mic/Line input signal push up.
15. Signal Input Volume Knob: Adjusts the volume for MP3 or Mic/Line signal
input.
16. Master Volume Knob: Adjusts all the output signals for the powered mixer.
17. Indicator: Displays the signal volume for the output.
18. Phantom Power: Press this button to activate the 48 V phantom power
necessary for a condenser microphone that might require 48 V power
supply from the mixer channel 1-4 input.
19. 5-Band Graphic Equalizer: Adjusts the frequency of the output signal.
20. Depth Knob: Adjusts the depth effect level of channel 1-4 for the Mic input.
21. Echo Volume Knob: Adjusts the echo level for the Mic input.
CONTROL PANEL

12
• Speaker Power Output: 300 W maximum
• Tweeter Type: 1”
• Subwoofer Type: 2 x 8” long throw
• Subwoofer Frequency: 48-4,500 Hz (±10 dB)
• Driver Type: 2 x Titanium Horn Driver
• Speaker Magnet: 2 x 30 oz
• Impedance: 4 
• Speaker Sensitivity: 90 dB
• Power Mixer Sensitivity: -14 dB
• S/N Ratio: 75 dB
• T.H.D.: 9.2%
• Frequency Response: 48-18 kHz (±10 dB)
• Bluetooth Version: 3.0
• Bluetooth Network Name: Knoxgear
• Bluetooth Wireless Range: Up to 65’
• Maximum USB/SD Card Support: Up to 32 GB
• Digital Audio File Support: MP3, WMA, MP3Pro
• +48 V Phantom Power: On/off
• Power Supply: 110-240 V, 60/50 Hz
• Speaker Dimensions (L x W x H): 11.22” x 9.84” x 17.72” each
• Ampliier Mixer Dimensions (L x W x H): 11.61” x 7.09” x 18.11”
• Ampliier Mixer Console
• 2 x 8” PA Speaker
• 2 x Tripod Speaker Stand
• 2 x ¼” Connection Cable
• Wired Handheld Microphone
• Power Cable
TECHNICAL SPECIFICATIONS
PACKAGE CONTENTS

13
WARRANTY
Knox Gear offers a 1-year Guaranteed Good: Works As It Should
warranty, covering both parts and labor to ensure that you enjoy the
full use of this product with peace of mind. For more information about
your warranty, please contact Customer Service at [e-mail].
Questions?
Please contact Customer Service at [e-mail]