Koala GETAWAY User manual

September 2022
CORNER SOFA
GETAWAY SOFA
Clickthe button
to watch the
assembly video

What’s in the box*:
*Not to scale
x2
x2 x6 x2
104-9175
x20
104-9177 x12 104-9178 x12 104-9123
x4
104-9237
x4 x1
x2
x2 x4 x2
labelled "corner
backrest"
x4
x2
x6
x4 x1
labelled corner
x2
104-9176
3 Seater
Only

1. Start to build the corner unit. Assemble the metal frame by connecting
the four corners together. Make sure brackets are facing outwards
and metal ledges are facing inwards.
1
2
Bracket
Metal ledge
2.Ensure the metal frames are flush with each other before moving
to the next step.

3. Lock the metal frame together by inserting 4x gumnuts into the
corners as shown, and tighten completely.
4. Screw on the legs with washers until fully tightened.
1
2
x4
x4
x4 x4

5.
6. Ensure the metal frames are flush with each other before moving
to the next step.
1
Metal ledge
Bracket
2
Now its time to assemble therest of your corner sofa
You will make 2 x frames, steps 5-9 will be repeated twice.
Assemble the metal frame by connecting the four corners together. Make
sure brackets are facing outwards and metal ledges are facing inwards.

8.
7.
x4
x4 x4
1
2
Lock the metal frame together by inserting 4 x gumnuts
into the corners as shown, and tighten completely.
Screw on the legs with washers until fully tightened.

9. Flip the frame over onto the legs and insert the middle beam.
1
2
!
Flip the frame over onto the legs and arrange with the sofa frames
as shown.
10.
NOTE - The middle leg is
only required for 3 seater
frames only.

11.
12.
Push the frames together so that the metal connection brackets
are aligned and insert plastic connection fitting.
Identify the armrests and insert them into the outer brackets and push
down fully. Note: the corner backersts are labelled in order to not be
confused with the armrests.
1.
x4
1. 2.
x2x2

13.
14.
Repeat for the corner backrests. Note, these backrests are labelled in
order to not be confused with the armrests.
Repeat for the sofa backrests.
x4
x2

15.
16. Insert the gumnuts through the metal frame into the backrests and
armrests, and tighten fully.
1 2
Make sure all backrests and armrests have been pushed all the
way down. All brackets must be engaged.
2
1
x8

17.
18. Align and push in the storage boxes under the front metal beam.
x5
This side up
This side down
Place the sofa inner seat frames onto the metal ledges on the metal
frame, making sure to place the label side down.
!
Note: the corner inner seat frame is
dierent and is labelled in order to
not be confused with the other sizes.
x4

19. Place the seat cushions, backrest cushions, and armrest cushions
onto the frame.
!
Note: Backrest
cushions have
logo label
PRODUCT INFORMATION AND CARE
FABRIC
Regular Care (Weekly)
• Vacuum regularly using low suction
• Protect from direct sunlight
• After use, you can flu the cushions to bring them back to shape
Cleaning
• Remove any spills immediately by gently blotting any liquid stands with a clean cloth.
• Scoop any sauces up before blotting the remaining sauces
• Use a mild detergent to gently remove any loose soilage.
• Do not scrub with a sti brush.
• Use a clean cloth to blot out any excess liquid.
• Avoid over wetting as this may result in a water mark.
Caution: Pretest the cleaning method on a hidden area of the sofa. If change in colour, or transfer do not
continue.
PILLING
Pilling can occur occasionally as a result of normal daily wear and should not be considered a fault.
Fibre pills
can be removed with a battery operated pilling tool, available from most haberdashery stores.
USING THE SOFA & DRAWERS
Weight Capacity
• Sofa weight capacity: 120kg per seat
• Drawer Weight Capacity: 20kg per drawer
SAFETY AND USE
• Pull and push drawers in a straightwards direction.
• Remember they are drawers not toys.
• Do not jump or stand on the drawers.
• Avoid sitting on the arms or backrest
• Avoid dragging the sofa if you need to move it
•(remember to remove the drawers first).