Koala KIRRIBILLI User manual

Clickthe button
to watch the
assembly video
November 2022
KIRRIBILLI TV UNIT

Clickthe button
to watch the
assembly video
What’s in the box*:
*Not to scale
Side panel
x2
Middle shelf divider
x1
Top panel
x1
Bottom panel
x1
Shelf
x2
Back panel
x1

Clickthe button
to watch the
assembly video
What’s in the box*:
*Not to scale
Legs
x2
Support rod
x2
Lever bolt
x2
Small dowel
x4
Large dowel
x4
Wall lanyard
x2
Shelf support
pin
x8
Wall lanyard
Gumnut
x2
Bottom panel
Gumnut
x2

Clickthe button
to watch the
assembly video
1.
2.
Place the top panel face down
on a flat surface.
Insert the small dowels into the holes shown.
x1
x4

Clickthe button
to watch the
assembly video
3.
4.
Screw the support rods
into the top panel.
Slide the side panels over the support rods.
x2
x2
!
NOTE - make sure
the grooves align

5. Clickthe button
to watch the
assembly video
Insert the back panel using the grooves in the side and top panel.
6.
x1
x1
Insert the middle shelf divider by
aligning the panel connectors.
to lock it in, push the divider down and
towards the panel groove.

Clickthe button
to watch the
assembly video
Lower the base panel onto the side
panels and middle divider.
7.
Insert the larger dowels into the holes shown.
8.
x4
x1

Clickthe button
to watch the
assembly video
Secure the base panel using the lever
bolts. Once tight, pull and realign
the lever into the direction of the dowels
9.
10. Insert the side support leg using the dowels to align.
x2
x2

Clickthe button
to watch the
assembly video
Secure the side support legs using the
Gumnuts provided.
11.
12. Screw in the bottom panel Gumnuts.
x4
x2

Clickthe button
to watch the
assembly video
13.
14. Insert the shelf support pins into the desired shelf setting.
Flip the TV unit into the upright position.
x8

Clickthe button
to watch the
assembly video
15. Insert the shelves, making sure
they sit on the support pins.
16. Fasten the wall mount lanyards
to the rear using the Gumnuts provided.
x2

Product Information and Care
TIMBER
Regular Care (Weekly)
• Dust surface with a dry cloth or duster in the direction of the natural grain.
• Protect from direct sunlight.
Cleaning
• Treat spills as soon as possible, wipe down with clean dry cloth.
• Do not use abrasive cloths, concentrated detergents, silicon based wood polishes.
Good to Know
• Timber is a natural product and there will be variation in grain, colour and features such
as knots. Over time the colour of timber will naturally change.
SAFETY AND USE
• While we design and engineer this product to be stable, we strongly recommend you use
the anchors (lanyards) provided to secure it to a wall.
• Anchor TVs to the wall not to the furniture.
• Seek advice from a hardware store or qualified tradesman on the best hardware to use
to secure the anchor to your wall type. If you are renting, talk to your agent or landlord
about installing the wall anchors.
• Be aware that uneven or soft floor surfaces can affect furniture stability.
• Discourage small children from climbing on the furniture.
Maximum Weight Capacity Per Shelf
• Top: 60kg evenly distributed.
• Adjustable Shelves: 10kg evenly distributed.
• Lower Shelves: 20kg evenly distributed.
• Outer Shelves: 5kg evenly distributed.

don’t forget to recycle.
Clickthe button
to watch the
assembly video