Koala SewComfort Chair User manual

Base with casters
Rail cover
Footrest
Piston and piston cover
Seat
Seat back
Seat metal bracket framework
Seat bracket framework
screws
Lumbar height peg-stop
SewComfort Chair
Assembly Instructions
Your SewComfort Chair Includes:
You will need:
Phillips screwdriver and small hammer or mallet
Pneumatic Operation Instruction
You may lock the chair at any height by releasing the control
lever at the exact position you wish to maintain the chair.
While seated on the
chair, pull the control
lever up. The seat will
lower.
Leaving the chair and
taking all body weight
o, pull the lever up. The
seat will lift up.

2
Insert the rail cover piece in the center of the base, making sure that it’s positioned all the way down.
Next, position the footrest, making sure that the holes in the footrest are facing down.
Base Assembly
Lay out your pieces for the base as shown.

3
Insert the piston in the center of the footrest, remove the yellow protective cap, then slide the piston
covers over the top of the piston as shown.
Next, locate the 4 screw holes on the bottom of the chair seat. Line up the metal bracket with the holes on
the bottom of the seat and attach the screws.
Tighten the chair controls with a screwdriver. Insuring the yellow cap has been removed from
the piston, place the seat on the piston. Make
sure it’s all the way down.
Assembling the Chair Seat to the Base

Install the seat back next. The seat back slides easily into the slot located on the back of the chair.
Gently hammer the peg into the bar located at the back of the seat. Then tighten the seat back height
adjustment knob and adjust the chair so that it is at a comfortable height for you.
The Koala
SewComfort Chair
can be adjusted to
t all 3 Koala Cabinet
heights. For higher
seat adjustments
you may want to
raise the footrest
height as shown.
The knob located
under the seat back
is for adjusting your
lumbar support.
Seat Back Assembly
KL- SCAI 1018
CRAFTED WITH PRIDE
Koala Studios are assembled in our Midwest facility with the utmost in
craftsmanship and quality. Every detail of your Koala Studio – from the
environmentally-friendly, highest-grade engineered wood base to the steel
components and decorative handles – were chosen with quality, elegance
and luxury in mind. www.koalacabinets.com
KL- SCAI