Koala KING SINGLE KIRRIBILLI BED User manual

Clickthe button
to watch the
assembly video
KING
KIRRIBILLI BED

Clickthe button
to watch the
assembly video
Side support panel
x2
Head end leg
x2 End support panel x2
Centre support frame
x2
Middle support frame
x2 Base platform
x4
Bedhead bracket
x2
End platform
x2
Bedhead
x1 Tapered
Gumnut
x8 Bedhead
Gumnut
x4
Foot end leg
x2
Leg Gumnut
x4
End platform
x2
What’s in the box*:

Clickthe button
to watch the
assembly video
U-Clip
!
NOTE - Do not remove u-clip
from any of the panels
Head
Foot
Pre-assembly check
Lay out all parts in the desired orientation for the room

x2
Ensure surface is flush
x1
x2
Slot head-end legs onto the
end support panel
Attach the bedhead brackets onto the end support panel
1.
2.
Clickthe button
to watch the
assembly video

x2
x1
x2
Ensure surface is flush
Fasten the bedhead brackets to the end
support panel using the Gumnuts
Slot the end panel to the foot-end legs
3.
4.
Clickthe button
to watch the
assembly video

x2
!
NOTE - Ensure felt pads are
facing inwards
x4
Ensure surface is flush
Attach the side support panel using
the metal brackets.
repeat for other side
Fasten the side panel to the legs using the Gumnuts
6.
5. Clickthe button
to watch the
assembly video

x2
x2
Ensure surface is flush
Ensure surface is flush
Slot the middle support frames to the
side support panels
Slot the centre support frames to the middle support frames
7.
8.
Clickthe button
to watch the
assembly video

x2
Lower side platforms into position and align the holes
Loosely screw in the tapered Gumnuts
x4
9.
10.
Clickthe button
to watch the
assembly video

Fasten the remaining Gumnuts firmly
Attach the end platforms to the head
and foot of the bed by aligning
the dowels to the holes
x2
x4
11.
12.
Clickthe button
to watch the
assembly video

Mount the headboard onto the
bedhead support by slotting
in the bottom brackets and
push down firmly
Fasten the bedhead using the bedhead Gumnuts provided
x1
x2
13.
14.
Clickthe button
to watch the
assembly video

x4
Place the base platforms into the
frame by aligning with the grooves
on the side rail
15. Clickthe button
to watch the
assembly video

don’t forget to recycle.
Clickthe button
to watch the
assembly video