Door open
all Button
Power Lamp
Volume
Switch
(KDP-602D)
Handset
Indoor Station Out door Station
Installation of indoor station
Wiring diagram of between two Indoor stations and DS-2D outdoor station
Installation of outdoor station
Keep away from humidifier and
stove. High temperature and
humidity can cause malfunction
When cleaning, never use wet
hands, volatile benzene or paint
thinner.
Maintain the product clean by
frequently wiping outdoor with
soft cloths
As this device consists of precise electronic components, and high voltage is generated
internally, do not attempt to disassemble.
Do not drop lndoor or outdoor
station, and avoid strong impact.
After attaching the body supporter with
2screws,put the Door amera into the grooves of
body supporter,and then fix it with screws.
Pre autions for Operation
Installation
Spe ifi ations
Name of Ea h Part
Wiring Diagram
Outdoor station can be attached on a wall or on a
door as shown on the drawing.
Component
Des ription KDP-602A
Electric source A 220V or A 110V
onsumption UN LOAD: 1.3W, IN LOAD: 4W
Signal Sound From door : chime , From indoor : Electronic hime
Wiring Door : 2Wired , Room : 6Wired
Range KDP-602A KDP-602D = 30m
KDP-602A or KDP-602D MS-2D or DS-2D = 50m
Master station for Indoor-use Substation for Outdoor-use Wall hanger for master station
Doorlock
You should connect the wires as
shown on the drawing