KOCOM KLP-305 series Manual

LOBBY PHONE
KLP-305 SERIES Operating Installation Manual
Thank you very muchfor purchasing
KOCOM Lobby Phone.
please read this manual
thoroughly to ensure correct usage,
before operating
KLP-305 SERIES
PRODUCT
MODEL
DATE PURCHASED
WARRANTY PERIOD
AGENCY ADDRESS
Warranty
Warranty Card
KLP-305 Series 07.11
To receive after-Sales service,
have the following ready
when you contact our branches
 1. Name of the product
 2. Model number of the product
 3. The area of problem
 4. Phone number and address at
 which you can be contacted.
KOCOM Warranties the original purchaser of this product as follows.
1) This product is produced under strict quality control and inspection procedures.
2) If this product breaks down during proper use as a result of product defect,
KOCOM will repair it within one year from date of purchase free of charge.
3) The following cases will be subject to charge, even during warranty period:
 a. Breakdown during transport, or through careless treatment, by consumer.
 b. Breakdown cause by unauthorized repair, or system modification.
 c. Breakdown caused by natural disaster or power disorder.

Cautions for Safety
For safe use, please stick to the following cautions.
- Read this cautions carefully and keep it within easy reach of you.
- For right installation, read this cautions thoroughly. Please install the product according to its
specifications.
- This Cautions for Safety may include items that are not contained in specifications of the product that
consumer purchases.
- Reading this cautions, use the product in a right manner. For further information, please contact our
A/S center.
About Symbol
A variety of symbols are used in this Cautions for Safety and your products to guide you to use
products in a right and safe manner and to prevent possible risks for users and other persons and
damages to their property. The meaning of each symbol is as follows. After fully aware of meaning of
each symbol, read the following cautions.
Warnings for disposal
- Do not throw used-up battery into fire places, which may cause fire and explosion.
Warnings
Warnings
Cautions for installation
- The relevant law obliges users to have a qualified electrician carry out wiring work for power
supply. Work by disqualified persons may cause fire and electric shock.
Cautions for Use
- Do not put heavy thing on the product. Dropping or falling due to heavy things on it may
cause injury of user.
- Wiring work for communication cables needs techniques and experiences. For this type of
wiring work, please consult to your local sales agent.
- According to the standard for electric work and other relevant regulations, install
communication cables at the place away from power cables. The failure to install cables
separately may cause fire, electric shock and communication troubles.
- Do not install the product on rolling table or sloping place. Dropping or falling may cause
damage on your product.
- In installation, avoid the place exposed to tremor or shocks, which may cause damages on
your product.
- Even if your product is waterproof, do not install it slanted place of water leakage, which may
cause a short circuit.
Warnings
This symbol means that wrong handling or ignorance of matters that
this symbol indicates may cause serious injury or even death of user.
Cautions
This symbol means that wrong handling or ignorance of matters that
this symbol indicates may cause serious injury or property damage of user.
This symbol means the matter that user should not do at nay event.
This symbol means that user should follow the instructions.
Symbols on Drawing
This symbol means that contents (high voltage, electric shock, warnings, etc.) to
which user should pay attention are included.
This symbols means that a certain action is not permitted. Specific points not
permitted are depicted around this symbol (for example, in the left drawing,
disassembly is not permitted.).
This symbol means instructions or is used to force user to do a certain action.
Specific instructions are depicted on the drawing (for example, the left drawing
instructs user to detach power plug from an outlet).
- For the product of wall-mounting type with fixing pegs, keep it safely.
Fixing pegs may cause injury of user.
- Install the product of wall-mounting type carefully not to drop from the wall.
Dropping due to earthquake or tremors may
- When installing the product on the wall, consider the thickness and material of the wall.
Dropping in use may cause injury of user.
Cautions for Repairs and Maintenance
- Clean the dust inside the product regularly. Failure to clean the dust for long time may cause
fire.
For inspection and cleaning of the inside of product, please contact your local sales agent.
- When putting your hands into the inside of equipment, be sure that plug is already detached
form an outlet or circuit-breaker is turned off.
- Be careful not to expose the product to benzene, thinner or hot water.
- Do not expose detergent directly to the product in a way of spaying, etc.
- Moving equipment, be sure that the plug is detached from an outlet.
- For equipment whose cables are connected to terminals, please contact your local sales
agent or qualified electrician.
- When replacing old fuse with new one, do not directly touch it with bare hands.
Use insulated tools or contact A/S center.

Warnings
Warnings
Cautions for Use
- Do not install the product at bathroom or at the place near a washing machine, or at other
humid places. It may cause fire or electric shock.
- Do not install the product at the place near a dresser, humidifier or heater. Also avoid the
place exposed to spark, heat or humidity. All of them may cause fire and electric shock.
- Do not install the product at the place exposed to dust, metals and harmful gas such as
hydrogen sulfide gas, all of which may cause fire and electric shock.
- Do not install the product at the place exposed to water and chemicals. This may cause fire
and electric shock.
- Do not scratch, break or arbitrarily process power cable, which may cause fire and electric
shock. Putting a heavy thing on a cable, heating it or pulling it may cause impairment on it.
- Do not place power cable at the place near heating equipment. It may cause damage of
cable's clothing material, which result in fire ad electric shock. When detaching plug from an
outlet, do not pull power cable.
- Damages on power cable may cause fire and electric shock. When detaching plug from an
outlet, please hold the plug tightly.
- Do not detach plug from an outlet with wet hand. I may cause electric shock.
- When using the existing wiring, be sure of the suitability of it to the product and install the
product. Failure to this caution may cause fire.
- When moving equipment, be sure that plug is detached from an outlet and communication
cable is disconnected. Damage on cables may cause fire.
- Voltage other than prescribed rated voltage is not permitted, which cause fire and electric shock.
- Do not use power terminal of product's main body in other equipment than prescribed ones. It
may cause fire and shortcircuit.
- In wiring work, use the designated wiring materials.
Wiring work using other materials than designated ones may cause fire.
- The equipment without waterproof marking shall not be installed at the place water leaks.
It may cause electric shock and short circuit.
- When working, be sure that power is disconnected. Failure to disconnect power may cause
electric shock.
- Be sure that the power cable is connected and earths according to designated method. Failure
to connection and earth may cause fire.
Cautions for Use
- This product is only for home. Do not the product for industrial or military use.
- Do not handle the equipment with wet hand, which may cause electric shock.
- Do not place wet or metallic materials on equipment. Water leakage or intrusion of metallic
materials may cause fire and electric shock.
- Do not block the ventilating opening of equipment or put alien substances into it, which may
cause fire and electric shock.
- Do not use battery that is not designated or mix new battery with old ones. Insert batteries to
fit their polarity. Explosion or leakage of battery may cause fire and injury of user.
- When visitor's image or voice is not displayed on screen or not sounded from speaker,
please check his/her identity before opening the door and contact our A/S center.
- Do not use equipment when lighting is expected or strokes. It may cause fire and electric
Cautions for Abnormality
- When power cable is broken (exposure of core or short-circuit), do not fail to replace broken
cable with new one. Failure to replace broken power cable may cause fire and electric shock.
- When detecting any abnormalities in equipment (communication is not available, images do
not be displayed on screen, calling is not available, or abnormal sound is heard), immediately
detach plug from an outlet, or turn off circuit breaker or detach batteries from equipment (in
case that equipment has no plug) before requesting repairs to sales agent or A/S center.
Keeping connection to power supply may cause fire and electric shock.
- When alien substances go into equipment, immediately detach plug from an outlet, or turn off
circuit breaker or detach batteries from equipment (in case that equipment has no plug)
before requesting repair to sales agent or A/S center.
- In the case of smoke or smell of unknown origin from equipment, keeping use it may cause
fire and electric shock. Detach plug from an outlet, or turn off circuit breaker or detach
batteries from equipment (in case that equipment has no plug) and be sure to check no more
smoke or smell from equipment before requesting repair to sales agent or A/S center. Since
personal repairing work by user may serious accidents. In any case, do not repair equipment
with your own hand.
- When dropping equipment or breaking its cabinet, detach plug from an outlet, or turn off
circuit breaker or detach batteries from equipment (in case that equipment has no plug)
before requesting repair to sales agent or A/S center. Keeping use equipment may cause fire
and electric shock.
- Avoid direct exposure to sunlight and store equipment at the place free from dust and high
temperature as you can. High temperature of equipment may cause fire and electric shock.
- Do not open rear cover, cabinet and cover of equipment. It may cause electric shock.
- Do not modify power cable or pull it with excessive strength, which may cause fire and
electric shock.
- Do not modify equipment. It may cause fire and electric shock.
- Call signal may cause damage on user's hearing ability.
- Do not connect power to other terminals than designated ones.
It may cause fire and electric shock.
- When building a system with the product, do not connect the product other equipment than
designated one. It may cause fire.
- When installing A/C switch, do work after removing the substance that may cause short circuit
or electric shock.
- Before installing or providing A/S service, be sure that the power is disconnected.

06_www.kocom.com LOBBYPHONE _ 07
KEY FEATURES
1. CALL FUNCTION
- When the house no. is pressed, that house no. is indicated in the display window.
- Call function to guardroom (One-touch button type)
2. COMMUNICATION FUNCTION
- Communication between lobby phone & house monitor
- Communication between lobby phone & guardroom master
3. VIDEO FUNCTION
- Available to see visitor's image from lobby phone though house monitor
- Available to see visitor's image from lobby phone though guardroom monitor,
in case guard monitor is installed to the guardroom master
4. VISIBLE AT NIGHT (IR LED BUILT-IN)
 - It is available to see visitor's image without any extra light at night within 0.3 M
5. BACK LIGHT CORRECTION FUNCTION
 - It is available to see visitor's image clearly at back light.
6. COMMOM GATE OPEN FUNCTION
 - Available to open the gate through pass word or RF card
 (RF card & its function is option)
PRECAUTION FOR OPERATION























-
Keep away from humidifiier
and stove
LCD
CAMERA
SPEAKER
RF CARD
Option
MIC
KEYPAD
Door not drop and avoid
strong impact.
Keep away from devices generating
strong magnetic field. (TV,Speaker,etc.)
Picture might be disturbed or
blurred and it might cause breakdown.
- Model no. KLP-305R2 (B/R1)
- Power  DC 17V / 50Hz, 60Hz
- Power consumption Max. 10W
- Assurance temperature-10° ~ +50°
- Image format 1/4" CCD
- TV System PAL / NTSC
- Min illumination 1 lux on the object (IR LED ON)
- Mount type Flush mount
Parallel (BUS) wiring between house monitor & guardroom master
When cleaning, never use
wet hands, volatile benzene
or paint thinner.
Keep picture clear by
cleaning camera window
frequently with soft cloths.
As this device consits of electronic
precision components, and as high
voltage is generated internally,
do not attempt to disassemble.
U
S
E
Please put the
‘RF Card’ hear
- Input house no. and press Call button
to make a call to the house.
- Press Guard button to call the guard.
- Press Cancel button to cancel the call.
Call Guard Cancel
Call Guard Cancel
NAME OF EACH PART
SPECIFICATION

08_www.kocom.com LOBBYPHONE _ 09
Visitor presses the house number to
be called and "CALL" button in order.
Visitor's figure is displayed on the screen
at the called house. Pressing the call
button, communication with visitor
becomes available (Call LED is turned on)
If a call is received from the guard
while communication between
house and lobby phone is under
way, lobby LED flickers.
Press "GUARD" button after
finising communication with
lobbyphone
Communicate with guard.
If a call is received from lobby phone to main
body while communication between house and
guard, lobby LED flickers.
After finishing the communication with guard,
press the "TALK" button.
Communication with lobby phone becomes
available.
TALK
GUARD
GUARD
TALK
LCD
TALK
House No
How to Operate
Call from Lobby Phone to House (ex) A call to house No. 1001
Call from Guard while Communication with Lobby Phone
Call from Lobby Phone while Communication with Guard and house
If pressing the "DOOR OPEN"
button while communicating
with lobby automatically opens.
DOOR OPEN
TALK
LCD
House No.
Closing / Opening the Common Gate
Call from Lobby Phone to House
Call from Lobby Phone to Guard
* In case that communication between lobby phone and house is under way,
pressing the "DOOR OPEN" button at home, Common gate opens automatically.
A visitor presses the house
number to be called and
"CALL" button.
Lobby phone LED (house LED,
call LED) that indicates its
operation status is turned on
and tone sound is heard.
If user presses the "TALK"
button at home, communication
with lobby phone becomes
available.
* In case that communication between lobby pone and guard is under way,
pressing the "OPEN" button at guard, Common gate opens automatically.
A visitor calls to guard by pressing the
"GUARD" button on lobby phone
(Lobby phone LED (guard LED, call LED)
that indicates its operation status is turned
on and tone sound is heard).
When, at guard, a guard hangs on the handset
and presses the "ENTER" button, communication
becomes available (operation method may vary
according to the specifications of product).
GUARD

10_www.kocom.com LOBBYPHONE _ 11
A visitor presses the house number to be
called and house call (Lobby phone LED
(house LED, Call LED) is turned on).
In absence, house and absence
LED flicker first, and guard and call LED
is turned on next. Call is sent to guard and
communication with guard becomes available.
LCD
House No.
Absence
How to Open Common Gate using Card (OPTION)
How to Open Common Gate using Password
Call
* Opening method may vary according to the type of card reader attached to lobby phone.
Approach the registered card to card
reader attached to lobby phone. Common Gate opens.
After inputting the house
number on lobby phone,
press the "#" button.
After inputting the
prescribed password,
press the "#" button.
Common Gate opens.
House No. Password
House Password Change at Common Gate
House password change
at common gate is available
while the communication
is under way.
Pressing the ##00# buttons in order,
" ==== " is displayed and flickers for 10 seconds.
ex) In case that user registers as house password.
Password change is available while the communication is under way.
* If communication is disconnected while user changes password, password change is cancelled.
* In input error, press the " CANCEL" button to restart the password change procedure.
10 seconds later, sign changes into
" ---- " in displaying window.
Then, input 4 digits of new password
and press the " # " button.
Displaying " YES " message means
that password has successfully
changed.