Kodak KLIC-7000 User manual

4H6878
KLIC 7006
1
2
3
4
5
UK
EC
Made in China for
Eastman Kodak Company
Rochester, NY 14650 U.S.A.
©Eastman Kodak Company, 2009.
MC/MR/TM: Kodak.
4H6878
www.kodak.com/go/accessories
Canadian DOC statement
DOC Class B compliance—This Class B digital apparatus complies with Canadian ICES-003.
Observation des normes-Class B—Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
FCC compliance and advisory
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed or used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1)
reorient or relocate the receiving antenna; 2) increase the separation between the equipment and the receiver; 3) connect the
equipment to an outlet on a circuit dierent from that to which the receiver is connected; 4) consult the dealer or an experienced
radio/TV technician for additional suggestions.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment. Where shielded interface cables have been provided with the product or specified additional components
or accessories elsewhere defined to be used with the installation of the product, they must be used in order to ensure compliance
with FCC regulation.
The KODAK Adapter K20-AM complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This
device may not cause harmful interference, and 2) this device must accept any interference received, including interference that
may cause undesired operation.
Waste Electrical and Electronic Equipment/Battery Disposal
In Europe: For human/environmental protection, it is your responsibility to dispose of this equipment and batteries at a
collection facility established for this purpose (separate from municipal waste). For more information, contact your retailer,
collection facility, or appropriate local authorities; or visit www.kodak.com/go/recycle. (Product weight: 81g.)
Go to www.kodak.com/go/REACH for information
about the presence of substances included on the
candidate list according to article 59(1) of
Regulation (EC) No. 1907/2006 (REACH).
KODAK Camera Battery
Charger K7700
Battery Compatibility and Charge Time:
Model Number Hours
KLIC-7000 1
KLIC-7001 1
KLIC-7003 1.4
KLIC-7004 1.25
KLIC-7005 1
KLIC-7006 1
KODAK Li-Ion Rechargeable Digital Camera
Batteries are available from dealers of KODAK
products, or go to www.kodak.com/go/batteries.
LED Indicator:
Flashing Red—Charger error; operating
temperature exceeded.
Solid Red—Battery error; replace battery.
Flashing Green—Charging (flashes at a faster
speed when close to fully charged).
Solid Green—Battery ready to use.
Specifications:
Voltage (input):
KODAK High Performance USB AC
Adapter K20-AM: 100V - 240V AC
Charger: 5V DC
Operating Temperature:
32° F – 113° F (0° C – 45° C)