Kodak EASYSHARE SMART PICTURE FRAME User manual

KODAK Smart Picture Frame
User’s Guide (non-Networked
Version)
Congratulations! You now can view your favorite pictures in new and exciting
ways. You can:
mStore and view up to 36 pictures in your Smart Picture Frame.
mView pictures from your COMPACTFLASH Card.
mCreate custom slide shows, showcasing your favorite pictures.
NOTE: This product is network-capable. However, this configuration does
not support networking features at this time.
Visit Kodak on the World Wide Web at www.kodak.com
SmartPictureFrameNon-Networked.book Page 1 Tuesday, October 9, 2001 4:36 PM

Eastman Kodak Company
343 State Street
Rochester, N.Y. 14650
© Eastman Kodak Company, 2001
Kodak is a trademark of Eastman Kodak Company.
All other trademarks and service marks are property of their
respective owners.
P/N 7E3743
SmartPictureFrameNon-Networked.book Page 2 Tuesday, October 9, 2001 4:36 PM

i
Table of Contents
1 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Unpacking the Box. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Caring for Your Smart Picture Frame . . . . . . . . . . . . . . . . . . .2
2 Getting Connected. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Connecting the Power Cord. . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Learning the Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Turning the Frame On and Off . . . . . . . . . . . . . . . . . . . . . . . . .5
Setting the Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
3 Adding Pictures to Your Smart Picture Frame . . . . . . . 7
Inserting a COMPACTFLASH Card. . . . . . . . . . . . . . . . . . . . . .8
Copying Pictures From a COMPACTFLASH Card . . . . . . . . . .9
4 Enjoying Your Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Viewing Pictures in the Frame Memory . . . . . . . . . . . . . . . . . .11
Viewing Pictures on a COMPACTFLASH Card . . . . . . . . . . . . 12
Still Picture Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Slide Show Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Rotating Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Deleting Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
SmartPictureFrameNon-Networked.book Page i Tuesday, October 9, 2001 4:36 PM

ii
5 Customizing Your Smart Picture Frame . . . . . . . . . . . . .17
Setting On and Off Times. . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Keeping Your Picture Frame Secure . . . . . . . . . . . . . . . . . . . .18
6 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
7 Limited Warranty and Regulatory Information. . . . . . . 23
Electrical Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Limited Warranty and Limitation of Liability . . . . . . . . . . . 23
How to Obtain Replacement. . . . . . . . . . . . . . . . . . . . . . . . . 25
Federal Communications Commission Statement . . . . . . 25
Canadian ICES-003 Statement . . . . . . . . . . . . . . . . . . . . . 26
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
SmartPictureFrameNon-Networked.book Page ii Tuesday, October 9, 2001 4:36 PM

1
1
1Getting Started
Unpacking the Box
Documentation
Packet
AC Power Supply
KODAK Smart
Picture Frame
SmartPictureFrameNon-Networked.book Page 1 Tuesday, October 9, 2001 4:36 PM

2
Unpacking Your Frame
Always handle your KODAK Smart Picture Frame with care. Though it is
designed for durability, the liquid crystal display (LCD) is fragile and could be
damaged if it is dropped or struck.
Something Missing? Something Damaged?
Locate the serial number on the back of your frame, and call 1-800-235-6325
for Kodak Customer Support.
NOTE: Keep the original product packaging in case you need to return the
frame or move it to a new location.
Choosing a Location
Locate your frame where it's easy to see and is away from direct sunlight and
exposure to extreme temperatures.
Caring for Your Smart Picture Frame
mDo not allow liquids to come in contact with the frame.
mIf necessary, clean the screen with a damp cloth.
mIf your frame must be cleaned, treat it like other fine wood furniture;
gently apply wood cleaners, or use a damp cloth. Do not allow the cleaner
to contact the screen.
CAUTION: Avoid using alcohol-based window cleaners, as these can
damage the protective screen surface. Do not spray liquid
cleaners around the frame; these can damage the electronics.
SmartPictureFrameNon-Networked.book Page 2 Tuesday, October 9, 2001 4:36 PM

2
3
2Getting Connected
NOTE: This product is network-capable. However, this configuration does
not support these networking features at this time:
Connecting the Power Cord
mShare!
mChannels
mOrder Prints
mFrame Locking
mSet Update Times
mUpdate Now!
mAdvanced/Set Dialing Options
1 Plug the power cord into the
bottom of the frame.
NOTE: Even if the power is
disconnected from the Smart
Picture Frame, your stored
pictures are safe.
2Plug the power supply into the
wall socket.
Po w e r Co rd
Power Supply
and Cord
SmartPictureFrameNon-Networked.book Page 3 Tuesday, October 9, 2001 4:36 PM

4
Learning the Buttons
* Not supported in this configuration
On/Off Turns the frame on and off
Pictures/Channels Switches the display between pictures and channels*
Menu Toggles the menu on and off; cancels an operation
Right/Left Arrows Displays next or previous picture or menu option
OK Selects the current menu option, or a picture
Share! Sends pictures*
Pictures/Channels
COMPACTFLASH
Share!
Right Arrow
OK Left ArrowMenu
On/Off
Card Slot
SmartPictureFrameNon-Networked.book Page 4 Tuesday, October 9, 2001 4:36 PM

2
5
Turning the Frame On and Off
Setting the Time
The first time you turn on the frame, you are prompted to set the time:
1 Use the arrow buttons on the top of the frame to adjust the hour, then press
OK.
2Use the arrow buttons to set the minutes, then press OK.
3Use the arrow buttons to select AM or PM, then press OK.
4Accept or re-enter the settings. When finished, press OK.
If you want to adjust the time after the initial setting:
1 Press the Menu button.
2Select Advanced, then press OK.
3Select Set the Time, then press OK.
4Go to Step 1 of the previous procedure.
To turn the frame on, press the
On/Off button or any other
button.
To turn the frame off, press the
On/Off button.
On/Off Button
SmartPictureFrameNon-Networked.book Page 5 Tuesday, October 9, 2001 4:36 PM

SmartPictureFrameNon-Networked.book Page 6 Tuesday, October 9, 2001 4:36 PM

7
3
3Adding Pictures to Your
Smart Picture Frame
The easiest way to transfer pictures from a digital camera to your Smart Picture
Frame is by using a COMPACTFLASH Card. The frame has a built-in reader that
supports Type I and Type II COMPACTFLASH Cards.
NOTE: Look for the COMPACTFLASH logo on the card.
KODAK COMPACTFLASH Cards are available from a dealer of KODAK products,
or from our Web site at www.kodak.com/go/accessories.
SmartPictureFrameNon-Networked.book Page 7 Tuesday, October 9, 2001 4:36 PM

8
Inserting a COMPACTFLASH Card
1 Eject the COMPACTFLASH Card from
your camera.
2Insert the card into the slot on the
right side of the Smart Picture
Frame.
NOTE: Make sure that the connectors
on the card are facing the Smart
Picture Frame.
SmartPictureFrameNon-Networked.book Page 8 Tuesday, October 9, 2001 4:36 PM

3
9
Copying Pictures From a COMPACTFLASH
Card
1 Insert a COMPACTFLASH Card into the Smart Picture Frame, and press the
Menu button.
2Select Copy. Press OK.
3Select From the CF Card to the Frame. Press OK.
Thumbnail views of the pictures on your COMPACTFLASH Card are
displayed. If more than 8 pictures reside on the card, use the Get Next
and Get Last 4 Pictures functions.
4Use the arrow buttons to select a picture you want to copy. Press OK.
A check mark appears over the selected picture.
5Continue until desired pictures are selected, then select Continue to
confirm copy. Press OK.
All selected pictures are displayed.
6Press OK.
7Review the pictures. If these are the pictures you want to copy from the
card to the frame, select Copy Pictures and press OK.
The selected pictures are copied from the card to the frame.
If there is insufficient memory to copy all of the selected pictures, a warning
message appears. You should either:
mRepeat the process, selecting fewer images to copy, or
mDelete some pictures from the frame to free up room. See “Deleting
Pictures” on page 15.
SmartPictureFrameNon-Networked.book Page 9 Tuesday, October 9, 2001 4:36 PM

10
NOTE: When you copy a high resolution picture (greater than 640 x 480
pixels) from a card to the frame, the picture is reduced to 640 x 480 pixels.
This allows the frame to store the maximum number of images. Due to this
compression, these pictures may appear with black bars above and below,
or on the sides.
If you want to retain a copy of a picture in its original higher resolution,
do not delete this picture from the card.
You do not need to copy pictures to the frame. When a card is inserted, the
pictures on the card are displayed.
SmartPictureFrameNon-Networked.book Page 10 Tuesday, October 9, 2001 4:36 PM

11
4
4Enjoying Your Pictures
Viewing Pictures in the Frame Memory
1 Make sure that you are in Picture viewing
mode (via the Pictures/Channels button).
2Use the arrow buttons to move forward and
backward through the pictures.
If the frame is in Still Picture Mode, the
picture on the screen remains there until
you change it. See “Still Picture Mode” on
page 13.
If the frame is in Slide Show Mode, the
pictures advance automatically. See
“Slide Show Mode” on page 13.
Pictures/Channels
Button
SmartPictureFrameNon-Networked.book Page 11 Tuesday, October 9, 2001 4:36 PM

12
Viewing Pictures on a COMPACTFLASH
Card
1 Insert a COMPACTFLASH Card into the Smart Picture Frame. (See
“Inserting a COMPACTFLASH Card” on page 8.)
The frame displays the last picture on the card-typically the most
recent picture taken. Then, the frame scrolls through pictures stored
on the frame followed by pictures from the card.
2Use the arrow buttons to scroll through your pictures, or view them as a
part of the slide show. (See “Slide Show Mode” on page 13.)
NOTE: If the pictures on the card were captured at a resolution higher
than that of the frame (larger than 640 x 480 pixels), it may take some
time to scale each picture.
Set COMPACTFLASH Card Icon Display
A small CF symbol in the lower right corner indicates that the current picture
resides on a card (not in the frame memory). To enable or disable the display
this icon:
1 Press the Menu button.
2Select Advanced, then press OK.
3Select Set CF Icon Display, then press OK.
4Use the arrow buttons to select either:
mYes (the CF icon will appear when the frame displays pictures from a
card)
mNo (the CF icon will not appear)
When finished, press OK.
5Accept or re-enter the settings. When finished, press OK.
SmartPictureFrameNon-Networked.book Page 12 Tuesday, October 9, 2001 4:36 PM

4
13
Still Picture Mode
To display a single picture, put your Smart Picture Frame in Still Picture Mode.
1 Press the Menu button.
2Select Slide Show. Press OK.
3Use the arrow buttons to select Pause Show. Press OK.
4Use the arrow buttons to select Accept Setting. Press OK.
The picture on the frame is displayed until you:
mChange the Slide Show settings.
mUse the arrow buttons to move to a different picture.
Slide Show Mode
In Slide Show Mode, the Smart Picture Frame continually cycles through all of
the pictures in the frame. If a COMPACTFLASH Card is inserted, pictures on the
card are displayed after pictures in the frame memory.
1 Press the Menu button.
2Select Slide Show. Press OK.
3Use the arrow buttons to select the time you would like each picture to
remain on the screen. Press OK.
4Select Accept Setting. Press OK.
The slide show runs as programmed until you change the settings. The
slide show setting does not apply to pictures on a card.
SmartPictureFrameNon-Networked.book Page 13 Tuesday, October 9, 2001 4:36 PM

14
Rotating Pictures
1 Press the Menu button.
2Select Rotate. Press OK.
Thumbnail views of pictures on the frame are displayed. If more than
8 pictures reside on the frame, use the Get Next and Get Last 4 Pictures
functions.
3Use the arrow buttons to select the picture you want to rotate.
4Press OK for each 90° you want to rotate the image clockwise.
5Press the arrow buttons to select another picture to rotate, or the Finish
and Return to Viewing button to exit Rotate mode.
NOTE: You cannot rotate pictures that reside on a card. However, you can
copy pictures from the card to the frame (see “Copying Pictures From a
COMPACTFLASH Card” on page 9), then follow the above procedure.
Your Smart Picture Frame can rotate images to
fit the landscape format of the frame.
SmartPictureFrameNon-Networked.book Page 14 Tuesday, October 9, 2001 4:36 PM

4
15
Deleting Pictures
NOTE: Pictures deleted from a card or from the frame cannot be
recovered. Use caution if you have elected to disable the 'CF' icon.
1 Press the Menu button. Select Delete. Press OK.
Thumbnail images of the pictures on your frame and card (if inserted)
are displayed. If more than 8 pictures reside on the frame or card, use
the Get Next and Get Last 4 Pictures functions.
2Use the arrow buttons to move through the images. When a picture you
wish to remove is highlighted, press OK.
An “X” appears over that image. (To deselect the picture, press OK
again.)
3When all the pictures that you wish to remove are selected, use the arrow
buttons to highlight the Continue to Confirm Deletion button. Press OK.
4When the Delete Confirmation screen appears, press OK, select Delete
Pictures, and press OK again. Select Cancel Deletion to exit without
deleting any pictures. Press OK.
NOTE: The frame ships loaded with a set of stock pictures. These can be
deleted using the above procedure.
SmartPictureFrameNon-Networked.book Page 15 Tuesday, October 9, 2001 4:36 PM

16
Archiving Pictures on COMPACTFLASH Cards
You can store your pictures by copying them to a COMPACTFLASH Card. Insert
a card into the Smart Picture Frame and follow these steps:
1 Press the Menu button.
2Select Copy. Press OK.
3Select From the Frame to the CF Card. Press OK.
Thumbnail views of pictures on the frame are displayed. If more than
8 pictures reside on the frame, use the Get Next and Get Last 4 Pictures
functions.
4Use the arrow buttons to select the pictures to copy. Press OK to mark each
picture for copying.
5When finished, select Continue to confirm copy. Press OK.
6Review the pictures. Press OK.
7If these are the pictures you want to copy, select Copy Pictures. Press OK.
Depending on the number of pictures selected, copying may take from
several seconds to several minutes.
If there is insufficient memory to copy all selected pictures, a warning message
appears. (This message does not remain on the screen.) You should either:
mRepeat the process, selecting fewer images to copy, or
mDelete some pictures on the card to make room for the pictures.
SmartPictureFrameNon-Networked.book Page 16 Tuesday, October 9, 2001 4:36 PM