Kodak G610 - EasyShare Printer Dock Photo User manual

www.kodak.com/go/g610support 1
ENGLISH
Overview
1 Camera battery status light 6 Transfer status light
2 OK/Print button 7 Camera connector
3 Cancel button 8 Power connector (DC-in)
4 (4-way button) 9 USB connector (to computer)
5 Transfer button
2
4
7
6
5
9
1
8
3

2www.kodak.com/go/easysharecenter
ENGLISH
Load cartridge and paper
Use only Kodak color cartridge & paper kits with symbol:
1
2
3
4
Glossy side up. Do not fill above
paper-limit line, , inside paper tray
(maximum 30 sheets).
Remove ribbon slack.
Insert cartridge.
5
, sold at www.kodak.com/go/accessories.

www.kodak.com/go/g610support 3
ENGLISH
Connect camera insert and power
Custom camera insert
included with your
camera
1
3
Your AC power adapter
may not require assembly
2

4www.kodak.com/go/easysharecenter
ENGLISH
Dock camera and print
Allow space
for printing.
5 in.
12.7 cm
1
Note: To avoid cropping, use your camera’s 3:2 Picture Size setting. (See your camera user’s guide.)
2
3Press OK/Print. (Each picture makes 4 passes
through the printer.)
Press to locate a picture.
Repeat for each picture.
Select pictures to print:
IMPORTANT:During printing, do not
pull out the print. The printer dock
automatically ejects the finished print
after the fourth pass.
Push down to seat the connector.
Press to select print quantity.

www.kodak.com/go/g610support 5
ENGLISH
Keep learning!
Visit www.kodak.com/go/g610support and
www.kodak.com/go/easysharecenter for:
• the extended user’s guide
• interactive troubleshooting and repairs
• interactive tutorials
• FAQs
• downloads
• accessories
• projects, printing tips
• product registration
Congratulations!
You have:
• set up your printer
• printed pictures
Keep learning!
Finish reading this book, so you can print and share your best pictures!

6www.kodak.com/go/easysharecenter
ENGLISH
Select pictures on camera and print*
1
Press the Share button.
3
Press the Review button, then press
to locate a picture.
2
Highlight Print, then press OK.
* For Kodak EasyShare digital cameras only. For other brands of
ImageLink system-compatible cameras, see the camera user’s guide.
Press to select copies, then press OK.
Dock camera, then press OK/Print.
(Tagged Print screen appears.)
4
5
6Press OK/Print again.
(Selected pictures are printed.)
Press to locate and tag more pictures.

www.kodak.com/go/g610support 7
ENGLISH
Crop pictures on camera before printing*
1
2
3
4
Press the Review button, then press to locate a picture.
Press the Menu button, highlight Crop, then press OK.
Press the Telephoto/Wide (T/W) buttons (on the camera) to size the crop box.
Follow the screen prompts.
Note: The original picture is saved.
* For Kodak EasyShare digital cameras only. For other brands of ImageLink
system-compatible cameras, see the camera user’s guide.
Cropped picture Cropped printed picture
Press to move the crop box, then press OK.

8www.kodak.com/go/easysharecenter
ENGLISH
Transfer pictures, print from a computer
1
2
3
4
5Print using EasyShare software or other
application.
Load software, then follow the
screen prompts. Dock camera, then press to transfer
pictures to your computer.
IMPORTANT: Load the software before connecting the printer dock to the computer.

www.kodak.com/go/g610support 9
ENGLISH
Charge the camera battery
1Load only a Kodak Ni-MH rechargeable digital camera
battery (KAA2HR), or a Kodak Li-Ion rechargeable
digital camera battery into the camera (3 hour charging).
3
Push down to seat the connector.
4
The camera is now powered by the printer dock instead of
the camera battery. Leave the camera docked to maintain
the charge.
Note: Not all cameras are compatible for charging on the G610 printer dock. See your
camera user’s guide for dock compatibility.
Purchase batteries and accessories at a retailer of Kodak products, or visit
www.kodak.com/go/accessories.
2

10 www.kodak.com/go/easysharecenter
ENGLISH
Refreshing the camera battery
IMPORTANT: The battery refresh feature is intended for use with the Kodak Ni-MH rechargeable digital
camera battery (KAA2HR) only. Li-Ion batteries do not require refreshing.
If you are getting fewer than 20 pictures per charge, you may need to refresh the battery. The refresh cycle
completely discharges the battery, then fully charges it. Allow up to 8 hours (or overnight) for a full refresh.
1
Push down to seat the connector.
2
3
8 hours for
full refresh
Press and hold (Up button) and the Cancel
button at the same time for 5 seconds, then
release the buttons. (The battery status light
turns green when charging is complete.)