Kodak PROFESSIONAL RFS 3600 User manual

USER’S MANUAL
KODAK
PROFESSIONAL
RFS 3600 Film Scanner
© Eastman Kodak Company, 2000
This manual and the accompanying software are protected by United States and international copy-
right laws. You may make one backup copy of the enclosed software and one copy of this manual. Do
not make additional copies of the software or copies of the manual or electronically transmit them in
any form whatsoever, in whole or in part, without the prior written permission of Eastman Kodak
Company.

2
USING THIS PDF FILE
This PDF file has been developed to make access to different sections as
easy as possible.
Any words that appear in red underline can be clicked to link you to
another part of this document.
All listings in the table of Contents are links — click on any entry to
jump to that section in this document.
All entries in the Index are links — click on a page number to jump to
that page number.
An Icon Index allows you to click directly from a picture of an icon to
the reference section explaining the function of that icon.
Any words that appear in blue underline can be clicked to link you to
an address on the World Wide Web.

3
Contents
Using this PDF File ________________________________ 2
Important Safeguards and Precautions _______________ 7
Electromagnetic Emissions __________________________ 9
VCCI Statement _______________________________ 10
Disposal Statement _______________________________ 10
Energy Star® Statement ___________________________ 11
Before You Begin _______________________________ 12
Macintosh Computer _____________________________ 12
Required Hardware _____________________________ 12
Required Software ______________________________ 12
PC-compatible Computer _________________________ 12
Required Hardware _____________________________ 12
Required Software ______________________________ 13
Optional Printers ________________________________ 13
Connecting the Scanner to Your Computer ___________ 14
Connecting the Scanner to a Power Source ____________ 14
Making a SCSI Connection_________________________ 16
If No External SCSI Devices Are Connected__________ 17
If External SCSI Devices Are Connected_____________ 18
Setting the Scanner SCSI Identification Number ______ 21
Making a USB Connection _________________________ 23
Installing Scanner Software _______________________ 25
Loading Filmstrips and␣ Slides _____________________ 26
Filmstrips ______________________________________ 26
Slides __________________________________________ 28

4
Tutorial: Using␣ Scanner␣ Software ___________________ 29
Open Scanner Software____________________________ 29
Produce Scanned Images __________________________ 31
A. Establish Scanner Settings (Settings Tab) __________ 32
B. Prescan Your Film ____________________________ 33
C. Rotate, Flip, Crop ____________________________ 35
D. Set Output Size (Width/Height, Magnify, Resolution) 36
E. Adjust Color (Click Balance, Auto Balance, Default
Balance, Sharpening) ________________________ 38
F. Fine-tune Color (Color Balance and Levels & Curves
Tabs) _____________________________________ 41
G. Generate Scans ______________________________ 44
H. Save Settings and Quit ________________________ 45
Reference – Hardware____________________________ 47
Power Connector and On/Off Switch _________________ 47
Four Operating Buttons ___________________________ 47
Computer Connections (SCSI and USB) ______________ 48
SCSI Connectors and SCSI ID Controller ___________ 48
SCSI ID Switch ________________________________ 48
USB Port _____________________________________ 48
Reference – Software_____________________________ 49
General Screen Layout ____________________________ 49
Thumbnail Images _____________________________ 49
Total Number of Prescanned Images _______________ 50
Scroll Left and Scroll Right Buttons (Scroll Filmstrip
Thumbnails) _______________________________ 50
Selecting/Deselecting Thumbnails _________________ 50
Film Motion (Reverse Eject, Reverse, Forward, Forward
Eject) _____________________________________ 51
Zoom In and Zoom Out _________________________ 51
Move ________________________________________ 52
Image Rotation (90°Counterclockwise, 180°,
90°␣ Clockwise) _____________________________ 52
Flip Horizontal and Flip Vertical __________________ 52
Black Pointer, Gray Pointer, and White Pointer _______ 52
CMYK or RGB Values ___________________________ 54
Auto Balance __________________________________ 54

5
Default Balance ________________________________ 55
Auto-Focus Slide _______________________________ 55
Undo ________________________________________ 56
Image Window ________________________________ 56
Prescan Frame _________________________________ 58
Prescan Strip __________________________________ 58
Scan_________________________________________ 58
Scan to File ___________________________________ 59
Calibration (Light Source) _______________________ 60
About (Version Numbers and Firmware Upgrade) ____ 60
Help ________________________________________ 61
Exit _________________________________________ 61
Status Bar ____________________________________ 61
Settings Tab _____________________________________ 62
Image Area ___________________________________ 62
Units and Rulers _______________________________ 63
Cropping _____________________________________ 63
Film Type (Negative, Reversal, B&W, and Film Terms) _ 64
Profiles (Monitor and Output) ____________________ 64
Color Depth __________________________________ 65
Sharpening ___________________________________ 66
Output Size and Input Values (Width, Height, Lock,
Magnify, Resolution, File Size) _________________ 66
Formulaic Relationships ______________________ 68
Numeric Examples __________________________ 69
Relationships Between Variables________________ 70
Manage Scan Profile ____________________________ 71
Scan Resolution _______________________________ 72
Scan Area ____________________________________ 72
Color Balance Tab ________________________________ 73
Brightness, Contrast, Saturation, Cyan/Red, Magenta/
Green, and Yellow/Blue _______________________ 74
Reset ________________________________________ 74
Levels & Curves Tab ______________________________ 75
Channel, Histogram, and Curves __________________ 76
Reset ________________________________________ 77
Working with Multiple Selected Images _______________ 77
Selecting Multiple Images ________________________ 77
Scanning Multiple Images________________________ 78

6
Software License Agreement_______________________ 79
Warranty______________________________________ 83
Troubleshooting ________________________________ 86
Hardware ______________________________________ 86
Software _______________________________________ 87
Image _________________________________________ 87
Messages ______________________________________ 90
Updating the KODAK␣ Driver ______________________ 96
Downloading Software Drivers Electronically __________ 96
Installing and Updating Software/Firmware ____________ 97
Repacking Instructions __________________________ 98
Specifications __________________________________ 99
Glossary _____________________________________ 104
Icon Index ____________________________________ 106
General Screen Icons_____________________________ 106
On the Settings Tab ______________________________ 109
On the Color Balance Tab _________________________ 110
On the Levels & Curves Tab _______________________ 110
Technical Assistance ____________________________ 111
Index ________________________________________ 112

7
Important Safeguards
and Precautions
33
33
3WARNING: To prevent fire or shock hazard, do not expose the equip-
ment to rain or moisture and use only the recommended accessories or
attachments.
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Read and Follow Instructions. Read and follow all the safety, operating,
and use instructions before operating the equipment.
Retain Instructions. Retain the safety and operating instructions for
future reference.
Retain Packing Materials. Retain the packing case for use if the equip-
ment must be shipped.
Heed Warnings. Heed all warnings on the equipment and in the operat-
ing instructions.
Controls. Adjust only those controls that are covered by the operating
instructions.
Cleaning. Unplug the equipment before cleaning. Clean only the out-
side case with a damp cloth. Do not use liquid cleaners or aerosol clean-
ers.

8
Attachments. Do not use attachments that are not recommended. The
use of such attachments may cause hazards and serious damage to the
equipment.
33
33
3WARNING: Water and Moisture. Do not use the equipment near water
— for example, near a sink, or in a wet room, or in a basement, and so
on. Do not expose the equipment to rain or moisture and do not im-
merse the equipment in water or other liquids; contact Kodak for ser-
vicing if this occurs.
Dust. Avoid operating the equipment in areas with excessive dust levels.
Power Sources. You should operate the equipment only from the type of
power source indicated on the unit. If you are not sure of the type of
power supply that will be used, consult a dealer or local power com-
pany.
Grounding. The AC adapter is equipped with a grounding-type plug.
The plug will fit into a grounding-type power outlet. This is a safety
feature. If you are unable to insert the plug into an outlet, contact an
electrician to replace the obsolete outlet. Do not defeat the safety pur-
pose of the grounding-type plug in any way.
Power-Cord Protection. Route power-supply cords so that they are not
likely to be walked on or pinched by items placed on or against them;
pay particular attention to cords at plugs, receptacles, and the point
where they leave the unit.
Operating Range. If the equipment has been stored or transported
outside its operating ambient temperature range (refer to Specifica-
tions), allow it to return to within its operating range before turning it
on.
Lightning. For added protection during a lightning storm, or any time
when you will leave the equipment unattended and unused for long
periods of time, unplug the equipment from the power outlet and the
computer. This will protect the scanner from damage caused by light-
ning or power-line surges.
Overloading. Do not overload power outlets and extension cords; this
can result in a risk of fire or electric shock.
Object or Liquid Entry. Never push foreign objects of any kind into the
equipment openings. Never spill liquid of any kind on the equipment;
contact Kodak for servicing if this occurs.
Servicing. Do not attempt to service the equipment yourself. Opening
or removing covers voids your warranty and may expose you to danger-
ous voltage or other hazards.

9
Damage Requiring Service. Unplug the unit from the wall outlet and the
computer and refer all servicing to the manufacturer under the follow-
ing conditions. (Refer to the Warranty for additional information.)
When the AC adapter or adapter plug is damaged.
If liquid has been spilled on the equipment or if objects have fallen
into the equipment.
If the equipment has been exposed to rain or water.
If the equipment does not operate normally according to the operat-
ing instructions.
If the equipment has been dropped or the housing has been dam-
aged.
When the equipment exhibits a distinct change in performance.
Accessories. Do not place the equipment on an unstable cart, stand,
bracket, or table. It can fall, causing serious injury to persons and
serious damage to the equipment. Use only with a stable cart, stand,
bracket, or table.
Handling. Handle the equipment with care; do not drop the equipment.
ELECTROMAGNETIC EMISSIONS
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio energy and, if not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular instal-
lation. If this equipment does cause harmful interference to radio or televi-
sion reception, which can be determined by turning your scanner off and
on, you can try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between your scanner and receiver.

10
Connect your scanner into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This equipment conforms with the requirements of European Standard
EN55022 with respect to radio interference for a Class B device.
Le present appareil numérique n’émet pas de bruits radioélectriques
dépassant les limites applicables aux appareils numériques de la Classe B
prescrites dans les règlements sur le brouillage redioélectrique édictés par
le Ministère des Communications du Canada.
This digital apparatus does not exceed the class B limits for radio noise
emissions from digital apparatus set out in the radio interference regula-
tions of the Canadian Department of Communications.
VCCI Statement
DISPOSAL STATEMENT
The KODAK PROFESSIONAL RFS 3600 Film Scanner contains lead and
mercury. Disposal of these materials may be regulated due to environmen-
tal considerations. For disposal or recycling information, please contact
your local authorities or contact Kodak Environmental Services at 716-477-
3194 or http://www.kodak.com/go/kes.

11
ENERGY STAR® STATEMENT
ENERGY STAR® is a U.S. registered mark.
As an ENERGY STAR® Partner, Eastman Kodak Company, has determined
that this product meets ENERGY STAR® guidelines for energy efficiency.

12
Before You Begin
Before you continue, complete and submit the enclosed Warranty Registra-
tion card. You should also read the Software License Agreement and War-
ranty in this manual.
MACINTOSH COMPUTER
Required Hardware
Apple Power Macintosh Computer, 300 MHz or greater. A faster pro-
cessor will result in faster scan times and increased performance.
At least 128 megabytes (MB) dynamic random access memory (DRAM).
Use 256 MB DRAM or more to improve performance when using the
scanner software.
At least 200 MB of available hard disk space.
USB or SCSI II connector.
High quality monitor with at least a 24-bit display card, with the moni-
tor resolution set to at least 800 by 600 pixels.
Required Software
Apple Macintosh OS 8.5.1 or later.
Adobe Photoshop 5.0 or later. Refer to your Adobe Photoshop manual
for hard disk and DRAM requirements for that software.
PC-COMPATIBLE COMPUTER
Required Hardware
PC-compatible computer, 300 MHz or greater. A faster processor will
result in faster scan times and increased performance.

13
At least 128 megabytes (MB) dynamic random access memory (DRAM).
Use 256 MB DRAM or more to improve performance when using the
scanner software.
At least 200 MB of available hard disk space.
USB or SCSI II connector. A USB connection requires Microsoft Win-
dows 98 SE or Windows 2000. A SCSI connection is supported on
Microsoft Windows 98 SE, Windows 2000, and Windows NT 4.0. For a
SCSI connection, the scanner is compatible with Adaptec 2906, 2930,
and 2940 Advanced SCSI Programming Interface (ASPI) host adapter
cards, running EZ-SCSI 5.0 or later software.
High quality monitor with at least a 24-bit display card, with the moni-
tor resolution set to at least 800 by 600 pixels.
Required Software
Microsoft Windows 98 SE, Windows 2000, or Windows NT 4.0.
Adobe Photoshop 5.0 or later. Refer to your Adobe Photoshop manual
for hard disk and DRAM requirements for that software. May also work
with other software applications that support TWAIN specifications.
A SCSI connection requires EZ-SCSI 5.0 or later software.
OPTIONAL PRINTERS
In the United States, contact Kodak at 1-800-CD-KODAK (1-800-235-
6325) for detailed information on printer options and accessories and to
obtain ordering catalog numbers; in Canada call 1-800-465-6325, and
elsewhere outside the United States contact your local Kodak representa-
tive.

14
Connecting the Scanner
to Your Computer
CONNECTING THE SCANNER TO A POWER
SOURCE
Follow the steps below to connect your scanner to a power source; the
numbers in the artwork correspond to the numbered steps that follow.
6
4
3
5

15
1. Remove the scanner from its box and save any packing material.
2. Place the scanner near your computer.
3. Press the off end (O) of the power switch on the back of the scanner to
ensure that the switch is in its off position.
4. Connect the power cable that matches your local power supply to the
AC adapter.
5. Plug the end of the AC adapter cable into the plug on the scanner.
33
33
3CAUTION: Use only the AC adapter supplied with the scanner; using
any other adapter will void your warranty.
6. Plug the other end of the power cable into a power source.
You are now ready to connect your scanner to your computer using either
the SCSI connection or the USB connection. If you are using a USB con-
nection, skip to Making a USB Connection. Instructions for making SCSI
connections follow.

16
MAKING A SCSI CONNECTION
Follow these steps to make a SCSI connection between your scanner and
your computer; the numbers in the artwork correspond to the numbered
steps that follow.
3
4
1. Shut down your computer and all peripherals.
2. PC-compatible customers only. You computer must have a supported
SCSI host adapter card and SCSI software installed to complete the
following steps. The Before you Begin (PC-Compatible Computer)
section of this manual lists supported adapter cards. If a card must be
installed, only trained and qualified technical personnel should install
and configure it.
3. Slide the cover on the back of the scanner to the right to reveal the two
SCSI ports, also called SCSI connectors.
4. Find the SCSI port on the back of the computer (not the scanner), and
determine whether or not one or more external devices such as a disk
drive are already attached to that port in a chain.
5. Select the appropriate instructions from the two sets that follow, ac-
cording to whether or not other external SCSI devices are connected.

17
If No External SCSI Devices Are Connected
The numbers in the artwork correspond to the numbered steps that follow.
4
2
5
3
1. Be sure power is turned off to your computer and scanner.
2. Select the SCSI II cable supplied with the scanner.
3. Attach the appropriate end of the SCSI cable to the SCSI port on the
computer; make sure the cable connector is well seated.
Note: If the connectors at the ends of the supplied cable do not allow
you to complete this step, you will need to purchase a SCSI cable that
will complete this connection. Cables are widely available from com-
puter retailers; if you must purchase a cable, be certain to obtain a high
quality cable with a continuous EMI shield over the cable and connec-
tors.

18
4. Attach the other end of the cable to either of the identical SCSI ports on
the back of the scanner; again make sure the cable connector is well
seated.
5. Set the SCSI termination switch on the back of the scanner to the on
position.
6. Continue at Setting the Scanner SCSI Identification Number later in
this chapter.
If External SCSI Devices Are Connected
Continue here if multiple SCSI devices are connected to your computer in
a chain. The following steps will help you determine where you should
place the scanner in that chain — either at the end of the chain, or in the
middle of the chain.
The total cable length connecting all devices must not exceed 15 feet (4.6
meters).
1. Be sure power is turned off to your computer, to the scanner, and to all
devices in the SCSI chain (turn off the computer first).
2. Select the SCSI II cable supplied with the scanner.
Note: If the connectors at the ends of the supplied cable do not allow
you to complete the following steps, you will need to purchase a SCSI
cable will complete the chain described below. Cables are widely avail-
able from computer retailers; if you must purchase a cable, be certain to
obtain a high quality cable with a continuous EMI shield over the cable
and connectors.
3. Determine if the already connected SCSI devices are terminated or not.
To do so:
A. First look for an external SCSI terminator on the devices; if you find
one (it should be on the last device in the chain), remove it.
B. Because some devices contain internal terminators, also check the
instructions for your devices to determine if they are terminated
internally.

19
4. If an external terminator has been removed or if none of the connected
devices is terminated internally, follow the directions in this step;
otherwise continue at the next step. In this step, you will place the
scanner at the end of the chain of connected devices; however, you can
place the scanner anywhere in the chain as long as the last device in the
chain is terminated.
AB
C
A. Attach one end of your SCSI cable to the empty SCSI port on the last
device in the chain; make sure the connector is well seated.
B. Attach the other end of the cable to either of the identical SCSI ports
on the back of the scanner; make sure the connector is well seated.
C. Set the SCSI termination switch on the back of the scanner to the on
position.
D. Continue at Setting the Scanner SCSI Identification Number next in
this chapter.

20
5. Follow this step if one of the connected devices is terminated internally.
In this step, you will place the scanner in the chain just before the
terminated device; however, you can place the scanner anywhere in the
chain between the terminated device and the computer. (The termi-
nated device is shaded in the artwork below.)
B
A
A. Locate the cable leading to the internally terminated device; this
should be the last device in the chain.
B. Disconnect the end of that cable from the internally terminated
device; do not disconnect the other end of the cable.