Kodak Scan Station 500 User manual

Before you begin, be sure the Scan Station power is on
and ready and the output tray panel is lowered.
1. Adjust the input and output trays as needed.
2. Documents are placed face down and top down in the
input tray with the side you want to scan facing the
input tray.
3. From the touch screen, select the destination(s) you
want to send your scanned document(s) to. More than
one email address, printer, network folder, etc. can be
selected at a time.
4. If you want to change the Scan settings (i.e., Scan As,
File Type, etc.), select Settings and make the desired
changes.
5. Press the Go button.
6. If you want to review or change any of your settings,
you can select Output on the Processing Review
screen and the Settings Review screen will be
displayed. Otherwise, select Scan on the Processing
Review screen.
7. Depending on your Scan Station configuration some
options may be displayed (e.g., Custom E-mail
Subject, Secure PDF Password, Add Voice
Annotation Attachment, etc.). Select any of these
options as desired.
8. Review your list of destinations, then select Scan or
press the Go button.
Following is a brief description of the Scan settings. See
the User’s Guide for detailed descriptions and procedures.
Basic Overview
Follow the steps below to perform basic Scan Station
operations. Basic operation means the Scan Station
default settings are used. For more information and/or
procedures on using your personal flash drive, see the
User’s Guide for the Kodak Scan Station 500.
Customizing your settings
If you want to change the default Scan settings, select
Settings on the Destination screen. The settings you
change remain in effect only for the current scan
session.
Icon Description
Settings: toggles between the Settings
and Destination screens and Exit.
Setting Shortcuts: six Setting Shortcuts
are provided to make scanning easier and
faster. They are: Defaults, Black and
White Document, Black and White
Document (OCR Quality), Color
Document, Color Document (OCR
Quality), and Color Photographs.
File Name Settings: allows you to name a
folder where scanned documents will be
placed when scanning to a network folder,
FTP location or USB flash drive
destination. You can also define the file
name prefix that will be applied to every
scanned document created. Scanned
documents are typically created with this
prefix and have an optional date and time
stamp appended to the prefix.
Scan As: available options are Black and
White, Grayscale or Color.
File Type: available file types:
•PDF Searchable (Image + Text) and
PDF - Image only — creates a document
or multiple documents that contain both
text and image data or image data only.
•JPEG — this option is only available if
your Scan As selection is Color or
Grayscale. JPEG creates multiple files,
one for the front and back of a page. If
JPEG is selected, you can select Draft,
Good, Better, Best or Superior quality.
•TIFF - Multi Page — creates one file that
contains all of the scanned pages. You
can select either Uncompressed, JPEG
or Group 4 compression.
•TIFF - Single Pages — creates multiple
files, one for each side of a scanned
page. You can select either
Uncompressed, JPEG or Group 4
compression.
Input Document Is: allows you to scan
one side or two sides of a document.
Document Type: select if the document to
be scanned is mostly Text, Photographs or
a mix of Text with Graphics.
Resolution: available resolutions are: 75,
100, 150, 200, 240, 300, 400 and 600 dpi.
The higher the resolution the sharper the
image. 300 dpi is optimal for creating
searchable PDF files.
Adjustments: for black and white output
only. You can choose Normal or Best.
Normal allows you to select a threshold
and contrast setting, Best allows you to
choose only a contrast setting.
Copies for Printing: select the number of
copies (1-99) to print.
Icon Description

1. Touch the desired destination icon.
2. If desired, make any Scan setting changes by
selecting Settings.
3. Place the documents you want to scan in the input
tray.
4. Press the Go button.
EASTMAN KODAK COMPANY
343 State Street
Rochester, New York 14650 U.S.A.
A-61634 / Part #8F8146 January, 2009
© Eastman Kodak Company, 2008
TM: Kodak
Using the Kodak Scan Station 500
Reference Guide
Advanced — provides these options:
•Blank Image Detection — used to
detect blank pages (i.e., the blank back
side of a document), so these pages can
be discarded.
•Multifeed Ultrasonic Detection — aids
in scanning by detecting documents that
may go through the feeder overlapped.
Check this option if you want the Scan
Station to detect double-fed documents.
Sending scanned documents to
destinations
No matter what destination you want to send a scanned
image(s) to, it is as easy as 1, 2, 3... The steps are the
same whether you are sending to email, flash drive,
network folder, printer, fax, or an FTP destination.
Email destination: Select one or more
email addresses, or enter an email
address using the touch screen or
optional keyboard accessory.
Flash drive destination: Select the folder
you want to place the scanned image in.
Network folder destination: Select the
network folder you want to send the
image to.
Printer destination: Select the printer
you want to send the scanned image to.
Fax destination: Select the desired fax
number.
FTP destination: Select from the list of
FTP destinations.
Icon Description
Kodak Service & Support
www.kodak.com/go/disupport
1.800.822.1414
(US&C only; all other regions, contact your local
Kodak Support Center)
When contacting support, have the following available:
•A description of your problem
•Scan Station serial number