Koden GTD-110 User manual

Safety
precaution
To ensure proper and safe use of the equipment, please carefully
read and follow the instructions in the Operation Manual.
Tamagawa Office:
2-13-24 Tamagawa, Ota-ku, Tokyo, 146-0095 Japan
Tel: [phone] Fax: [phone]
Uenohara Office:
5278 Uenohara, Uenohara-shi, Yamanashi, 409-0112 Japan
Tel: [phone] Fax: [phone]
• Design and specifications are subject to change without notice.
For details, please contact:
www.koden-electronics.co.jp
[email protected]
08.08 Printed in Japan
Type name GTD-110/150
Display GTD-110 10.4 inch High Brightness TFT Color LCD
GTD-150 15 inch High Brightness TFT Color LCD
Map mode Mercator projection
Display mode North-up, East-up, South-up, West-up, Course-up
(Waypoint), Head-up, Centered North-up
Track zooming range 0.01 to 3600 nm (or 0.02 to 6600 km)
Display Effective map creation area Below latitude 75 degree
Plotting interval Time 1, 2, 5, 10, 20, 30, 60, 120, 300, 600 sec
Distance 0.01, 0.02, 0.05, 0.1, 0.2, 0.5, 1.0, 2.0, 5.0, 10.0 nm (km)
No. of plots 2000, 4000, 7000 (maximum plot) x 7 blocks
Track color 7 colors
Position data display Lat/lon, Loran-C LOP
Navigation data display Own ship's position, Own ship's course, Own ship's speed,
Waypoint position, Waypoint bearing, Waypoint distance,
POB position, POB bearing, POB distance, Cursor posi-
tion, Cursor bearing, Cursor distance
Position registration 8300
Mark color 7 colors
Mark shape
(The marks are only useable in Mark Editing mode)
Mapping Mapping nodes 500 points x 7 blocks
Display color 7 colors
Other ships plot 10 ID x 1000 points
Route memory 50 routes x 50 waypoints
Chart C-Map NT / NT+ / NT MAX
Data card C-Map User C-Card
Alarm Arrival, POB, Cross track error, Depth, Grounding
Positional correction By cursor or by lat/long data
Magnetic compass correction Manual, Auto
Input data format NMEA 0183 Ver 2.0/1.5 (GGA, GLL, VTG, ZDA, RMC,
MSS, MTW, TTM)
Output data format NMEA 0183 Ver 2.0 (APB, GGA, GLL, VTG, XTE, ZDA, GTD)
Memory backup By Lithium battery (for SRAM backup) and Non-volatile ROM
Other functions Loran-C LOP, Ring markers
Power supply voltage 10.8 to 31.2 VDC
Power consumption: GTD-110 Less than 20 W (at 24 VDC)
GTD-150 Less than 40 W (at 24 VDC)
Operating temperature -15 ° C to +55 ° C (+5 ° F to +131 ° F)
Waterproof Resistive against driven water, in compliance with IPX5
Display GTD-110/GTD-150 With hard cover 1
DC power cable CW-253-2M 5P connector fitted one end 1
Fuse F-7161 10 A 1
Operation manual 93151542 1
SPECIFICATIONS EQUIPMENT LIST
CONNECTIONS
DIMENSIONS AND WEIGHT
GPS sensor GPS-20A For GPS signal reception 0.6 kg
DGPS sensor KBG-2 For GPS signal reception 1.8 kg
Junction box JB-10 1-IN/3-OUT 0.42 kg
Power rectifier PS-003A With two 5 A fuses 2.8 kg
AC power cable VV-2D8-3M Flying leads on each end 3 m
Standard equipment
Options
Display unit
Unit: mm (inch)
Weight: 10 kg (22 lbs)
Weight: 6.5 kg (14.5 lbs)
380
(14 15/16)
320
(12 5/8)
340
(13 3/8)
320
(12 5/8)
29.5
(1 3/16) 100
(3 15/16)
24
(15/16)
138
(5 7/16)
224.5 (8 7/8)
390
(15 3/8)
430
(16 15/16)
173
(6 13/16)
24
(15/16)
67
(2 5/8) 150 (5 7/8)
GTD-150
GTD-110
10.4-inch/15-inch Color LCD
Chart Plotter
GTD-110/150
DGPS sensor
KBG-2
GPS sensor
GPS-20A
10.8 to 31.2 VDC
100/115 VAC
200/230 VAC
VV-2D8-3M
CW-253-2M
Power rectifier
PS-003A
Junction box
JB-10
Display unit
Color fish finder
Marine radar
Marine radar
(with ATA built-in)
IN/OUT
IN/OUT
OUT
OUT
Solid lines: Standard devices and connections.
Dashed lines: Optional devices and connections.
GTD-110
GTD-150
Wherever you go, you can rely on it!

High brightness, wide angle Liq-
uid Crystal Display
The GTD-110/150 offers a steady, crisp,
flicker free image on a 10.4 inch (GTD-
110) or 15 inch (GTD-150) high grade
Liquid Crystal Display in a broad range of
lighting conditions, bold contrast in day-
time and finely defined in nighttime. The
display has a wider viewing angle allowing
monitoring from the sides as well as up or
down.
Electronic seamless data base
charts
Seamless technology offers large area cov-
erage at constant range scale, with the best
available details.
TheGTD-110/150 supportC-Map NT,NT+
and NT MAX.
Combination of GTD-110/150 and en-
hanced chart C-Map NT MAX improves
utilization revolutionary. C-Map NT MAX
provides a wide variety of navigation infor-
mation such as lighthouses, buoys, con-
tours, tides, currents and so on.
Various marks and greater num-
bers of ship’s track
Marks are available in 7 different shapes
and 2 kinds of size, up to 8,300 marks are
available in total. Ship’s track is available
in 2 kinds of thickness and 7 colors, up to
49,000 points can be plotted on the ship’s
track. (7,000 points in 7 groups/tracks are
also possible)
Operation “easy”
Rotary controls and keypads, these operating devices are easy to find and straightforward to use. Further, symbol marking,
track plotting and picture setting functions are individually grouped on the operating panel, permitting quick and effective
operations. The newly added CANCEL key allows you to return to the last setting when you press a key by mistake.
Koden Chart Plotter GTD-110/150, the best choice for safe navigation and effective fishing!
Loran-C LOP display
The LOP display
The LOP (Line Of Position) display is still widely used among many
fishermen in the world. The GTD-110/150 has the facility to show the
Loran-C LOP display, easily switched from Lat/Lon display.
Compact and waterproof
Where to install? The choice is yours. Track Display can be
installed anywhere on the boat, on the table, tilted console or
even on the fly bridge, thanks to a strengthened waterproof
design, conforming to the IPX5 requirements.
Radar Plotting
This feature permits
tracked radar plots to be
overlaid on the screen,
when a radar set with an
ATA(AutomaticTracking
Aid) function is connected
to the GTD-110/150. The
maximum numbers of
ship’s track are 10, with
1,000 plotting points each.
Each track can be modi-
fied in terms of mark size,
track thickness, color,
course line display yes/no,
etc.
Display example:
This picture shows the
ship’s tracks of own ship
with ship’s profile mark
and other ships in differ-
ent colors.
Data security
Even in the event of a system lock up or crash,
all storage data is securely protected from
accidental erasure by a double layer memory.
The POB marking
This feature allows instant marking of the
location of an accident such as man over-
board at a press of the POB (Person Over
Board) key. This key can also be used as an
instant event key.
Navigate with confidence!
FEATURES