Koden ESR-180 User manual

AMENDMENT HISTORY
ESR-180 OPERATION MANUAL
Doc No: 0093132862
No. Document No &
Rev No.
Date Amendments
0 93132862-00 04/07/20 First issue
1 93132862-01 05/03/01 Page 85 DISPLAY CABINET (Sonar Mode)
2 0093132862-02 06/01/26 Cover
3 0093132862-03 07/10/12 Cover
4 0093132862-04 10/08/11 Page 11,Page 13_TRUNK/JOINT PIPE LENGTH
5 0093132862-05 11/02/07 Page 11_TRUNK/JOINT PIPE LENGTH detail Addition
6 0093132862-06 11/11/28 Page 7,Page 12_ESR-180BB_OPERATION UNIT Addition
7 0093132862-07 13/05/14 Chapter 2, Chapter 3, Cover
8 0093132862-08 14/04/16 Chapter 4
9
10
Amendment policy
When any change is applied in the document, the document number of the cover sheet is modified. The
document number is shown in the footer area, right bottom of cover sheet.
○
c2004-2013 Koden Electronics Co.,Ltd.All rights reserved.
No part of this publication may be reproduced, transmitted, translated in any form by any means without
the written permission of Koden Electronics Co., Ltd. The technical descriptions contained in this
publication are subject to change without notice. KODEN assumes no responsibility for any errors,
incidentals or consequential damages caused by misinterpretation of the descriptions contained in this
publication.

31
41
42
44
47
71
72
75
83
84
85
86
87

ESR-180/180BB.

to someone else, make sure

this unit

25
26
27
28
29
30
10
11
12
13
17

150

OPERATION UNIT
ESR-180
ESR-180BB

The ESR-180/180BB 180kHz and 80kHz are shipped from the factory with a
standard, 1,411mm Joint Pipe and without Trunk Pipe (options are available).

FRP
FRP
• The bottom of Flange should be
reinforced by FRP.
TRUNK PIPE
TRUNK PIPE
trunk
p
i
p
e