Usage Notes
1. Thank you for purchasing this product, the operational guidelines below
contains important information about safe and proper use of this device to
avoid accidents, so please read the instructions carefully before use.
2. Keep the device away from high temperatures or damp and dusty
conditions.
3. Avoid dropping, falling or intense collision.
. Do not switch off the power while in the process of upgrading or
uploading/downloading the firmware, as it may cause program error.
5. Do not disassemble or clean unit with alcohol or other harsh cleaning
fluids.
6. The manufacturer reserves the right to improve the product, if the
specification or design is changed, without prior notice.
7. Disclaimer: The manufacturer only assumes responsibility for the product’s
service and maintenance , but not for the data loss and other joint liabilities
in the process of use.
8. The device is not waterproof.
9. Pictures listed in this manual are for reference only.
1.0 USAGE
1.1 Connecting the device
Insert the HDMI plug into your TV or other display device via the HDMI port, and
enable the signal route for this connected HDMI port on TV.（Please refer to TV
guidelines for instructions on how to do this).
Connect Micro USB port with original power adapter; The USB port works with
2. GHZ devices, such as a mouse, keyboard, USB flash drive etc.
(Note: The connection diagram only for reference purpose, there may be small
differences in the product models, so please take this into consideration.)
2.0 GETTING STARTED
2.1 Turn on the device
Plug in the power, the LED indicator will light up and the device will be switched
on automatically.
2.2 O erating instructions
Go into the home page, the device can be operated with a mouse. The left button
works as “enter”, while the right button works as“return”. Scrolling the mouse is
'page up' and 'page down'.
