Kogan KHSTVQCDONA User manual

KHSTVQCDONA
USER MANUAL

Note:
1. Thank you for purchasing this product, the operational guidelines below contains
important information about safe and proper use of this device to avoid accidents, so
please read the instructions carefully before use.
2. Keep the device away from high temperatures or damp and dusty conditions.
3. Avoid dropping, falling or intense collision.
. Do not switch off the power while in the process of upgrading or
uploading/downloading the firmware, or it may cause program error.
5. Do not disassemble or clean unit with alcohol, diluent or benzene liquor.
6. The manufacturer reserves the right to improve the product, if the specification or
design is changed, without prior notice.
7. Disclaimer: The manufacturer only assumes responsibility for the product’s service
and maintenance , but not for the data loss and other joint liabilities in the process of
use.
8. The device is not waterproof.
9. Pictures listed in this manual are for reference only.
1、Connect the device.
Insert the HDMI plug into TV or other display device via the HDMI port, and enable
the signal route for this connected HDMI port on TV（Please refer to TV
guidelines). Connect Micro USB port with original power adapter; The USB port
works with 2. GHZ device, such as a mouse, keyboard, USB flash drive etc.
(Note: The connection diagram only for reference purpose, there may be small
differences in the product models, so please take this into consideration.)
2、Get started
2.1 Turn on the device: plug in the power, the LED indicator will light up and the
device will be switched on automatically.
2.2 perating instructions：Go into the home page, the device can be operated with
a mouse. The left button works as “enter”, while the right button works as“return”.
Scrolling the mouse is 'page up' and 'page down'.

2.3 Language and input method
Settings > Language and input, select different languages here
User can install their own input software and check the option of this input method.
While inputting, you can select your favourite method by clicking on input area, and then
clicking the keyboard's bottom-right corner to show a list of all input methods available for
selection.
2. Network connections.
Wireless connection
Enter setup, turn on WIFI, click on the desired wifi hot spot, and input password of the
wireless router for connection (A WIFI icon will pop up on the status bar after connection).
Note：Please ensure that the wireless router has access to external internet.
Wired connection
a) Plug a USB to LAN converter(You will need to purchase this separately) into the
device, and insert the network cable into RJ 5 port (Please refer to the connection
diagram below ).
b) Settings > turn on Ethernet, after connection, an icon of cabled connection will
appear on bottom--right corner of the status bar.
2.5 Install/Uninstall APK
2.5.1 APK from unknown source
Please use Google market as the source for APK files as much as possible, when
installing APK from other sources, please go to settings > security > check the option of
unknown source.

2.5.2 Install APK
Install from Local documents：
a) Copy the downloaded APK to USB flash drive, hard drive or SD card etc, then
connect to the TV box.
b) Go to“APK installing widget”, select the desired APK, and click install (dependent on
memory device connected).
Install from internet：
Option 1：Download APK from internet APK stores (the filename extension is .APK), and
then click install (if the downloading is performed through a browser, the status bar will
show an icon of completion after the download, click it to install).
Option 2 ：Install the APK of other Android application market first, and then download
from it directly
2.5.3 Uninstall APK
a) Settings > APK > Manage APK, a list of installed APK pops up.
b) Click “uninstall” to remove the APK
2.6 Turn your mobile phone into a remote control
Install a “remote control.apk” that is developed specifically for the device on the mobile
phone. Connect both the phone and the device to a same wireless router, then open this
APK from the phone. A list of optional devices should then appear. (Note: this feature
works only with an Android mobile phone)
Click Switch to Mouse mode
Click Switch to touchscreen mode
Click Switch to keyboard mode
Click Return to last step

2.7 DLNA / Miracast
DLNA (Digital Living Network Alliance)
The mobile phone and this device are connected to the same local network (connected to
same wireless router)；Install Youtube, PPTV or other video player supporting DLAN
protocol on the phone, open the APK and play 1 video programme, click on from playing
interface—> , and then click
Miracast
Currently supported only by mobile phones and Tablet PCs powered by Android .2 or
above, and the method for connection varies for different devices. Generally go to
settings—display, or WI-FI - sensor setting. Here is an example based on the xiaomi 2
mobile phone：
Go to WI-FI on the phone, select settings—WIFI—WIFI DISPLAY.
Select your device (device name is shown upon access of WIFI DISPLAY), after
connection, the contents on mobile phone are streamed to TV display.

3 Trouble-shooting
1. Question ：What do I do if a screen problem appears, such as black screen, splash
screen etc?
Answer：Check if the TV is powered on or the correct input/signal route is enabled. If a
HDMI cable is plugged into HDMI port 2 on TV, the signal route for this port should be
enabled, and also make sure that the terminal of the HDMI cable is undamaged.
2.Question：There is no access to internet after connecting to wireless router.
Answer：Check if the wireless router works well；
3.Question: A problem of stuttering/stagnant video appears while playing online videos.
Answer：This is due to a limited internet access speed, and it is recommended to use
a dedicated cable for internet connection.
.Question：There is no sound for AV output？
Answer：Please check if the sound is muted on TV, or the video’s sound is normal
when played on a computer. Also check if the audio cable (white and red strings) is
plugged into audio input port on TV.
5.Question:The multimedia files are not found on SD card or USB flash drive?
Answer：Please check if the connection with these memory devices is good.
6.Question：The device is stuck on boot screen.
Answer ：The device has crashed, and if the remote control does not work at this
moment, just disconnect the power and reboot the device.
Please contact the Kogan customer support team if you have any other questions.