Kogan CERTA CTGAGH211SA User manual

WALK-IN GREENHOUSE
1.95M X 1.43M X 0.73M
CTGAGH211SA

Parts
Picture
Qty.
1
(30 in.)
x3
3
(15 in.)
x22
4
(11 in.)
x14
5
(39.5 in.)
x4
8
(26.5 in.)
x15
A x4
D x6
E x20
J x2
Y x1
Z x4
Anchors x4
Ropes x4
COMPONENTS

OVERVIEW

Assemble the Greenhouse Frame
1. Arrange parts into groups as listed in the Components section of this user guide,
unfold cover, and put to one side.
2. Assemble the base with the below parts:
(26.5 in.)
(11 in.)
(30 in.)
(15 in.)
8(x4) 4 (x4) 1 (x2) 3 (x8)
D(x4) E (x4)
3. After the base is assembled, assemble the first level with the below parts.:
(26.5 in.)
(11 in.) (15 in.)
8(x4) 4 (x4) 3 (x8)
E(x8) Z (x2)
ASSEMBLY
Note:
Ensure you have read through the entire manual, and have everything listed on
the Components page, before beginning to assemble.

4. Assemble the second level with below parts:
(26.5 in.)
(11 in.) (15 in.)
8(x4) 4(x4) 3 (x6)
D(x2) E (x6) Z (x2)
5. Assemble the third level with the below parts:
(26.5 in.)
(11 in.)
(30 in.)
8(x2) 4 (x2) 1 (x1)
A (x4) E (x2)
6. Assemble the top level with the below parts:
(26.5 in.)
(39.5 in.)
8(x1) 5 (x4)
J (x2)
7. To have the frame connected, assemble the frame by pushing downward while
connecting two rods at a time, giving it an extra force.

8. When the frame is complete, repeat step 7 from all angles, as shown in the image.
This will result in a tighter and smaller frame enabling the greenhouse cover to
slide on easily.
9. Once completed, place the cover Yover the frame and attach.
Assemble the Anchor Kit
1. Hammer the anchors into the soil, placing them on all four sides of the
greenhouse.

2. Connect the top end of the rope to the greenhouse strap as shown in the image.
Repeat this step for all four sides.
3. Take the other end of the rope and pass it through the bent side of the anchor as
shown in the image. Repeat this step for all four sides.

NOTES