Kogan 7 Series User manual

QUICK START GUIDE
40” FULL HD LED TV
SERIES 7 GF7400
(KALED40GF7400GA)
6

3
COMPONENTS
A Kogan 40” FULL
HD LED TV
B Remote control
C Stand (x2)
D M4 x 15mm screw (x4)
E AAA battery (x2)
F Quick-start guide
G Warranty card
C D
E
NOT INCLUDED
Phillips head screwdriver, antenna cable, broadband internet connection.
G
QUICK START GUIDE
40” FULL HD LED TV
SERIES 7 GF7400
(KALED40GF7400GA)
A
F
B

4
REMOTE CONTROL OVERVIEW
1
4
5
8
15
12
14
7
28
2
5
12
24
8
11
14
17
20
25
21
28
29
1
4
3
7
6
10
9
13
18
22
26
16
15
27
23
19
1. POWER: Turn on the TV/Standby.
9. MUTE: Mute or restore the sound.
6. NUMBER KEYS: Change the
channel directly.
3. SLEEP:
4. SUB: Select subtitle of media video
file.(needs the support of disk or file
12. REPEAT: Repeat mode.
10. VOL: Increase and decrease volume.
11. CH: Next and Previous channel.
5. FAV: Show the list of favourite
channels.
: Return to the previous
channel tuned.
8.
2. AUDIO: Switch the audio channel
when DVD or multimedia playing.
I/II:In the TV condition, press this
button to select the stereo mode.
7. DTV/RADIO: In DTV mode, press
DTV/RADIO button to enter DTV
or RADIO mode.

5
16. MENU: Display menu page.
17. EXIT: Exit the Menu.
18. P.SIZE:
picture size.
15. NAVIGATION KEYS (Up, Down,
To move in the
menus and confirm settings.
: Displays the main index in
Teletext mode.
19. GUIDE: Show the Electronic
Program Guide.
: Reveals hidden information such as
the answers to a quiz in TELETEXT
mode.
20. S.MODE: Setting audio options.
: Freeze a multi-page changing on
Teletext mode.
21. P.MODE:
Output image mode selection.
: Displays the top, buttom or all of page.
: Next file or chapter.27.
: Previous file or chapter.26.
29. : Fast rewind playback.
28. : Fast forward playback.
24. TEXT:
Teletext function.
23. : Stop playback.
: Play/Pause.22.
TS: In DTV mode, press TS button
to start the delay function, press
the button to start playing delay
program, press the button to
terminate the delay functions.
25. REC/ : In DTV mode , press
REC button to start recording,
press button to stop recording.
Press the appropriate colour to
direct access functions in
TELETEXT or EPG OSD mode.
5
8
15
12
14
7
28
12
24
8
11
14
17
20
25
21
28
29
7
10
9
13
18
22
26
16
15
27
23
19
14. SOURCE: Press to change
signal source.
13. INFO: Show information about
the current program.

6
BEFORE YOU GET STARTED
Spread cushioning flat to lay the TV on. This willhelp to prevent damage.
1. Stand assembly
a. Attach stand to base of TV.
b. Insert two 15mm screws and use Phillips head screwdriver
(not supplied) to tighten.
c. Repeat these steps for second stand.
2. Remote control assembly
a. Open the battery compartment cover on the backside.
b. Insert two 1.5V AAAsize batteries, making sure to match the polarity
markings (+ / -) of the batteries with the diagram inside
the compartment.
c. Replace battery compartment cover.
2a 2b 2c
ASSEMBLY AND INSTALLATION
HDMI 4LAN
1a
1c
1b

7
4. Turning TV on
Plug the power cord into a suitable power outlet, then press the
POWER () button on the remote control, making sure to aim it at the
sensorat the front of the TV. Alternatively, you can press the power
button on the lower side of the backpanelon the TV.
3. Connect to antenna
a. Connect anantenna cable (not supplied) via the ‘ANT’ input port at
the back of the TV.
b. Ensure the antenna cable is also connected to a working antenna,
eithervia an antenna wallsocket in yourhome,ordirectly.
TURNING TV OFF
Press the POWER ( ) button on the remote control to enter standby mode.
To power down the TV completely, unplug the power cord from the power
outlet.
Do not leave your set in standby mode for long periods of time. If you will
not use the TV for a long time,it is recommended to unplug the set from
both the power outlet andaerial.
Antenna
wall socket
3b
Antenna cable
(not supplied)
HDMI 3 HDMI 2 HDMI 1
(ARC) ANT USB 2.0 (5V / 500mA)
AUDIO OUT
DIGITAL
AUDIO OUT
R -AUDIO- L VIDEO
AV
3a

8
When turning the TV on for the first time, the Setup Wizard screen will
appear. Use the ▲, ▼and OK buttons to navigate the following options.
SETTINGS
Select Language
Press / button to select the language to be used for menus
and message.
Select Country
Select Energy Mode
Press ▼/ ▲button to highlight country menu.
Press / button to select the country you want to.
Press / button to select the Energy mode.
Select Input Source
Press SOURCE button to display the
input source list, Press ▼/ ▲or
SOURCE button to select the input
source you want to, Press OK button
to enter the input source, Press EXIT
button to quit.
Auto Tuning

Poor picture and sound quality
Try a di erent channel
Adjust the antenna
Check all connections
No picture or sound in TV status
Try another channel
Press the TV/AV button
Make sure TV is plugged in
Check the antenna connection
No sound or sound is too low at
maximum volume
Check the volume settings on any
external speakers connected to your
television
Adjust the TV volume accordingly
Check another channel or input
Check that MUTE hasn’t been
turned on
No colour, wrong colour or tints
Make sure the program itself is
broadcast in colour
Select the picture menu, then adjust
the colour and tint submenus
Picture rolls vertically
Check all connections
Blurred or snowy picture, distorted
sound
Check direction, location and
connections to your antenna
Issues may be caused by the use of
an indoor antenna (poor signal)
Remote control malfunctions
Replace remote control batteries
Check battery terminals
Remote is out of range, move closer
to TV
Remove any obstructions between
remote and IR sensor of TV
Make sure the power cord to your TV
is plugged in and turned on
Image is not centred on the screen
Adjust the horizontal and vertical
position
“No Signal” on HDMI source
Test the device with a di erent HDMI
cable
Plug the device into another HDMI
port
Try a di erent device connected to
the same cable and port
Perform a factory reset on your TV
For our full TV troubleshooting guide
and extended User Manual for this
TV, head online to help.kogan.com
BASIC TROUBLESHOOTING
9

10

11