Kogan KA1KSTMXSLA User manual

General Safety Instructions
Read the operating instructions carefully before putting the appliance into
operation and keep a copy of the instructions handy for future reference. If you
give this device to other people, please also pass on these operating instructions.
•The appliance is designed exclusively for private use. This appliance is not
fit for commercial use. Do not use it outdoors. Keep it away from sources of
heat, direct sunlight, humidity never dip it into any liquid) and sharp
edges. Do not use the appliance with wet hands. If the appliance is humid
or wet, unplug it immediately.
•When cleaning or putting it away, switch off the appliance and pull the plug
out from the socket pull on the plug, not the cable). If the appliance is not
being used, remove any attached accessories.
•Do not operate the machine without supervision. If you should leave the
working space, always switch the machine off or remove the plug from the
socket pull the plug itself, not the lead).
•Check the appliance and the cable for damage on a regular basis. Do not
use the appliance if it is damaged.
•Do not try to repair the appliance on your own. Always contact the Kogan
customer service team. To avoid exposure to danger, always have a faulty
cable replaced only by a Kogan technician.
•Pay careful attention to the following “Special Safety Instructions”.
Children and Frail Individuals
•In order to ensure children's safety, please keep all packaging plastic bags,
boxes, polystyrene etc..) out of their reach.
•In order to protect children or frail individuals from hazards, please ensure
that this device is only ever used under supervision. This device is not a toy.
Do not allow small children to play with it.
Special Safety Instructions
•Do not interfere with any safety switches.
•Do not insert anything into the rotating hooks while the machine is
working.
•Place the machine on a smooth, flat and stable working surface.
•Do not insert the mains plug of the machine into a power socket without
having first installed all of the necessary accessories.
•DANGER OF OVERLOADING! Please use the device either as a mincer or a
mixer, but never both functions at the same time.

Component Overview
Main Components and Standard Accessories
1 Drive Shaft 6 Power Cord
2 Cap of arm 7 Mixing Bowl
3a Front Protector 8a Stirrer
3b Jar Protector 8b Kneading Hook
4 Arm raising/lowering lever 8c Whisk
5 Pulse operator and lever regulator
Using the Mixing owl
1. Place the mixing bowl into its holding device, then turn the bowl in the
direction of the LOCK until it locks into place.
2. In order to lift the arm, press the lever 4) downwards in the direction of
the arrow. The arm will now move upwards.
3. Mount the required utensil by inserting the top into the drive shaft, then
lock the cotter pin into the shaft by turning utensil to the right.
4. Fill the bowl with your ingredients. Do not overfill the machine – the
maximum quantity of ingredients is 1.5kg)
5. Lower the arm using the lever 4).
6. Insert the mains plug into the wall power socket.
7. Switch the machine on, using the level regulator to a speed between 1 and

6 depending on the mixture).
8. For pulse operations kneading at short intervals), turn the switch to the
“PULSE” position. The switch has to be held in this position according to
the desired mixing duration length. When the switch is released, it will
return automatically to the “0” position.
Levels and Hook Usage for Mixtures of less than 1.5kg
Levels Use Type of Mixture
1 – 2 Kneading Hook Heavy mixtures bread or short pastry)
3 – 4 Stirrer Medium-heavy mixtures crepes or sponge)
5 – 6 Whisk Light mixtures cream, egg white, blancmange)
Pulse Whisk Intervals mixing under sponge, egg white etc...)
Note: with heavy mixtures, do not operate the machine for more than ten
minutes. Allow it to cool down for a further ten minutes.
Note: use the splash guard to protect against liquid mixture spillage.
9. After kneading/stirring, turn the switch 5) back to the “0” position as soon
as the mixture has formed a ball. Then remove the mains plug.
10. Press the lever 4) downwards and the arm will be raised.
11. The mixture can now be released with the help of a spatula from the mixing
bowl.
12. The mixing bowl can now be removed by turning it to the left.
13. Clean the parts as described under the “Cleaning” section.
Cleaning
•Remove the mains plug from the power socket before cleaning.
•Never immerse the unit housing with the motor in water!
•Do not use any sharp objects or abrasive detergents.
•Only a damp cloth should be used to clean the outside of the housing.
•All components mixing bowls, hooks etc...) that come into contact with
food can be cleaned with soapy water.
Note: No components are suitable for dishwasher cleaning.
•Allow all parts to dry thoroughly before reassembling and storing the
device.
Please contact the Kogan customer support team if you have any questions.
The full manual, including recipes, can be obtained from kogan.com