Kohler Dickinson K-6546 Series User manual

Features
•KOHLER cast iron
•Acid-resistant enamel finish
•Single compartment
•With integral apron
•Undercounter mount (-4U)
•Tile-in mount (-4 & -3)
•3-hole (-3), 4-hole (-4), or 4-hole (oversized) (-4U)
•33″(83.8 cm) x 22-1/8″(56.2 cm)
Codes/Standards Applicable
Specified model meets or exceeds the following:
•ASME A112.19.1M
•IAPMO/UPC
APRON FRONT KITCHEN SINK
K-6546
Colors/Finishes
•0: White
•Other: Refer to Price Book for additional colors/finishes
Accessories:
•CP: Polished Chrome
•NA: None applicable
•Other: Refer to Price Book for additional colors/finishes
Specified Model
Model Description Colors/Finishes
K-6546-3 3-hole sink (tile-in) ❑0❑Other_____
K-6546-4 4-hole sink (tile-in) ❑0❑Other_____
K-6546-4U 4-hole sink (undercounter) ❑0❑Other_____
Recommended Accessories
K-9000 P-Trap ❑CP
Optional Accessories
K-5984 Hardwood cutting board ❑NA
K-8801 Duostrainer
®
sink strainer ❑CP ❑Other_____
Product Specification
The kitchen sink shall be made of cast iron with acid-resistant enamel finish. Sink shall be single compartment. Sink shall have
integral apron. Sink shall be undercounter (-4U) or tile-in (-4 or -3). Sink shall be 3-hole (-3), 4-hole (-4), or 4-hole (oversized)
(-4U). Sink shall be 33″(83.8 cm) in length and 22-1/8″(56.2 cm) in width. Sink shall be Kohler Model
K-6546-_______-_______.
DICKINSONTM
Page 1 of 2
111205-4-CB
USA: 1-800-4-KOHLER
Canada: 1-800-964-5590
kohler.com

Technical Information
Fixture*:
Sink 30″(76.2 cm) x 15″(38.1 cm)
Water depth 8″(20.3 cm)
Drain hole 3-5/8″(9.2 cm) D.
Faucet holes,
undercounter
2-3/8″(6 cm) D.
Faucet holes, tile-in 1-3/8″(3.5 cm) D.
* Approximate measurements for comparison only.
Installation Notes
Install this product according to the installation guide.
Due to the special nature of this installation, Kohler Co.
recommends that an experienced cabinet maker use the
actual sink to build the new cabinet or modify an existing
cabinet.
For undercounter installations, allow a 3/4″(1.9 cm) reveal to
support the K-5984 cutting board.
4" (10.2 cm)
2" (5.1 cm)
2-5/8" (6.7 cm)
4" (10.2 cm)
4" (10.2 cm)
K-6546-4U
K-6546-4
K-6546-3
1-1/2" OD
2"
(5.1 cm)
10"
(25.4 cm) 4-1/4"
(10.8 cm)
4-1/4"
(10.8 cm)
4-1/4"
(10.8 cm)
3/8"
(1 cm)
5/8"
(1.6 cm)
7/8"
(2.2 cm) R.
1-1/4"
(3.2 cm) R.
1"
(2.5 cm) R.
8-5/8"
(21.9 cm)
8-3/4"
(22.2 cm)
1"
(2.5 cm) R.
22-1/8"
(56.2 cm)
2"
(5.1 cm)
1-3/4"
(4.4 cm)
14"
(35.6 cm)
16-1/2" (41.9 cm)
33" (83.8 cm)
Product Diagram
DICKINSONTM
DICKINSONTM APRON FRONT KITCHEN SINK
Page2of2
111205-4-CB