Kohler 18359X-CL User manual

1267342-X2-A 1



ขอแนะนําการติดตั้ง
18359X-CL 18361X-CL 
ROUGH-IN DIMENSIONS

Shower Head
หัวฝกบัวกานแข็ง
All information is based on the latest product
information available at the time of publication.
Kohler Co. reserves the right to make changes in
product characteristics, packaging, or availability at
any time without notice.
Please leave these instructions for the consumer. They
contain important information.
NOTES:
1. Flush the water supply pipes thoroughly to remove
debris.
2. Recommended working pressure: 2 to 5 bar.
3. The highest working pressure for spray is 0.5MPa
(5 bar). If it exceeds 0.5MPa(5 bar), a pressure
reducer is needed. The highest water and environment
temperature is 60ºC. Please keep handspray,
shower head and the shower arm away from heater,
or it may become damaged and cause injury to the
user.
BEFORE YOU BEGIN
*Dimension are approximate.

*Unit: mm

18361X-CL
G1/2˝
64
254X254
G1/2˝
Ø254
62
18359X-CL
STANDARD APPLICABLE
Special model meets or exceeds the following at date
of manufacture: TIS
 




  


   
 
 
 

1267342-X2-A 2
อุปกรณ์ประกอบและอะไหล่
e-mail: [email protected]
Call Center: +(66) 2204 6222
การติดตั�ง

)
(1)






การดูแลรักษาและทําความสะอาด









**Color code must be specified when ordering.
หมายเหตุ:
NOTE: For all Asia pacific regions (excluding China) add SP (SPxxxxxxx**) in front of the part number when ordering.
CLEANING INSTRUCTIONS
All Finishes: Clean the finish with mild soap
and warm water. Wipe entire surface
completely dry with clean soft cloth. Many
cleaners may contain chemicals, such as
ammonia, chlorine, toilet cleaner etc, which
could adversely affect the finish and are not
recommended for cleaning.
Do not use abrasive cleaners or solvents on
Kohler faucets and fittings.
SERVICE PARTS
1218903
77420
2
3
1
4
INSTALLATION
Flush both water supplies through the
shower arm(2, not provided) for about
one minute before the showerhead(1)
is installed. Apply tape or sealant to the
exposed end of the shower arm. Tighten
the showerhead with a strap wrench.
Before installation, install restrictor(3)
if needed. Take out washer(4) and install
restrictor as the figure shown, reinstall
washer.