Kohler 6625-0 User manual

1
1124487-W2-A
IMPORTANT
INSTALLER: THIS MANUAL IS THE PROPERTY OF THE
CUSTOMER AND MUST BE RETAINED WITH THE PRODUCT
FOR MAINTENANCE AND OPERATIONAL PURPOSES.
Installation and User Guide
Iron Tones Smart Divide
Undercounter Kitchen Sink
MODEL NUMBERS
Important! Please quote the above model number(s) when ordering spares
6625-0

2
1124487-W2-A
THANK YOU FOR CHOOSING KOHLER COMPANY
USER MAINTENANCE
Thank you for choosing Kohler Company. Your Kohler Company product reects
the true passion for design, craftsmanship, artistry, and innovation Kohler Company
stands for. We are condent its dependability and beauty will surpass your highest
expectations, satisfying you for years to come.
All the information in this guide is based upon the latest product information available
at the time of publication. At Kohler Company, we strive to full our mission of
improving the level of gracious living for each person who is touched by our products
and services. We reserve the right to make changes in product characteristics,
packaging, or availability at any time without notice.
Please take a few minutes to review this guide. If you encounter any installation or
performance problems, please call the customer Care number on the back page
of this guide.
For best results, keep the following in mind when caring for your KOHLER
product:
• Always test your cleaning solution on an inconspicuous area before applying
to the entire surface.
• Wipe surfaces clean and rinse completely with water immediately after applying
cleaner. Rinse and dry any overspray that lands on nearby surfaces.
• Do not allow cleaners to soak on surfaces.
• Use a soft, dampened sponge or cloth. Never use an abrasive material such
as a brush or scouring pad to clean surfaces.
• Be careful not to leave staining materials in contact with the surface for extended
periods of time.
• The ideal cleaning technique is to rinse thoroughly and blot dry any water from
the surface after each use.
Kohler offer a range of kitchen sink accessories such as bottom basin racks and
rinse baskets to help protect the surface form scratches.

3
1124487-W2-A
INSTALLATION
Install Using the Undermount Kit
IMPORTANT INFORMATION
Caution! Cast iron sinks are very heavy. Get assistance lifting the sink.
Important! Using a wood support frame is an installation option for all undercounter
cast iron sinks, but is required for non-rectangular sinks.
Undercounter sinks should be installed by experienced installers.•
To ensure a safe and damage-free installation, two people should install the•
sink.
Prior to installation, unpack the new sink and inspect it for damage. Return the•
sink to its protective carton until you are ready to install it.
Plan the sink installation so future removal from underneath the countertop is•
possible without damaging the countertop. Do not use adhesive sealants.
Use proper fasteners and techniques to ensure that the frame will support a•
minimum of 136 kg (300 lbs). Locate the fasteners for easy access in the event
the sink needs to be removed.
A cabinet with a minimum width of 914 mm (36″) is recommended for this •
installation.
Observe all local plumbing and building codes.•
A
Bolt
Bolt
Nut
Rail
Rail
Hanger Bracket
1. Thread the bolts into the nuts two turns.
2. Slide the nuts into the slots in the rails.
3. Position the bolts through the rail slots where the corners of the sink will be
located.

4
1124487-W2-A
4. Fit a hanger bracket onto the end of each rail.
5. Position the rail assemblies into the cabinet running front-to-back.
6. Measure the overall width of your sink. This distance represents the distance
″A″ between the outside edges of the rails as shown in the illustration.
7. Position the hanger brackets according to distance ″A″ and mark the screw
hole locations onto the cabinet.
8. Drill 3 mm starter holes at each marked location.
9. Secure the hanger brackets in position with suitable screws.
10. Lower the sink into the cabinet. Make sure that the sink is supported by the
undermount kit.
11. Make sure that the sink is level, make any adjustments as necessary using the
screws located at each corner of the sink.
12. Install the countertop.
Wipe Away Excess Sealant
Apply Silicone Sealant
13. Apply a thin bead of silicone sealant where the sink meets the countertop.
Immediately wipe away any excess sealant with a damp cloth. Fill any voids if
needed.
14. Allow the sealant to cure for at least 30 minutes before proceeding.

5
1124487-W2-A
15. Complete the tap and drain connections.
16. Run water into the sink and check all connections for leaks.
Make Drain Connections
Install Using a Wood Frame Support
Wood Frame
Clearance for the Sink Basin
Sink
Shim Location Wood Frame
Cabinet Wall
Apply Silicone Sealant
Sink Rim Flush with Cabinet
1. Measure the cabinet opening where the sink will be installed. Plan for adequate
clearance between the tap handles and the backsplash or nished wall.
2. Construct a wood frame for the inside of the cabinet. Allow adequate clearance
for the tap plumbing and the sink basin. Make sure that the frame will support
the entire sink rim.
Important! The frame should be located so that once the sink is installed, the
top of the sink rim will be ush with the top of the cabinet walls.
Note! If needed, shims can be used to bring the sink rim ush with the cabinet
walls.
3. Position the wood frame within the cabinet and secure. Locate the fasteners
for easy access in case the sink needs to be removed.
4. Apply a 25 mm (1″) bead of sealant at each corner of the wood frame where it
will contact the sink.

6
1124487-W2-A
Wipe Away Excess Sealant
Apply Silicone Sealant
Make Drain Connections
a b
c
5. Install the countertop.
6. Apply a thin bead of silicone sealant where the sink meets the countertop.
Immediately wipe away any excess sealant with a damp cloth. Fill any voids if
needed.
7. Allow the sealant to cure for at least 30 minutes before proceeding.
8. Complete the tap and drain connections.
9. Run water into the sink and check all connections for leaks.

7
1124487-W2-A
All Dimensions in mm
DIMENSIONS
381 mm
283 mm
476 mm
156 mm
248 mm 502 mm
14 mm
238 mm
244 mm
838 mm
35 mm
1-1/2" OD

8
1124487-W2-A © Kohler Mira Limited, May 2009
CUSTOMER CARE
Guarantee of Quality
Kohler UK guarantee products against any defect of materials or workmanship for the following periods
To register and fully benefit from this guarantee you must
return the enclosed product registration card indicating
the Kohler items you have purchased.
Within the guarantee period we will undertake to resolve
any material defects, by providing replacement parts,
modules or complete product, as we deem appropriate.
To be free of charge, work must only be undertaken by
Kohler UK approved personnel.
To ensure that any problems can be promptly resolved
you must contact Kohler UK directly.
Proof of purchase must be provided with any claims.
This guarantee covers products in domestic use, installed
and maintained in accordance with the instructions. It
covers the purchaser only and is not transferable.
Commercial / Business Use
Any Kohler Bathroom product used within a commercial /
business premise is guaranteed for 1 Year against any
defect of materials or workmanship.
Not Covered by this Guarantee
Damage or defects arising from incorrect installation,
improper use or lack of maintenance.
Installed product damaged in transit Consequential loss,
damage or product removal and installation costs.
General wear and tear.
This guarantee is in addition to your statutory and other
legal rights.
Ceramic Ware and Cast Products
Shower Valves, Taps, Cistern
Fittings, Toilet Seats and Bath
Panels
Bathroom Furniture and
Accessories
Whirlpool / Spa Baths
Stainless Steel Products and, Acrylic Baths
To Contact Us
Kitchen and Bathroom Taps and Accessories
Tel: [phone]
Fax: [phone]
Email: [email protected]
Website: www.kohler.co.uk
Showers and Fittings
Tel: [phone]
Fax: [phone]
Email: [email protected]
Website: www.kohler.co.uk
All other Kohler Products
Tel: [phone]
Fax: [phone]
Email: [email protected]
Website: www.kohler.co.uk
Our confidence in the quality and reliability of our superior products enables us to offer a
comprehensive guarantee for all products.