Kohler K-3901 Assembly instructions

Proof
Homeowners Guide
Toilets
Mproduct numbers are for Mexico (i.e. K-12345M)
Los números de productos seguidos de Mcorresponden a México
(Ej. K-12345M)
Français, page “Français-1”
Español, página “Español-1”
K-3901
1212876-5-B

Proof
Important Information
READ AND FOLLOW ALL INSTRUCTIONS
SAVE THESE INSTRUCTIONS
Important Information
SKU Electrical Water Supply Pressure Listings
K-3901 120 V, 15/A min., 20 A
recommended, 60 Hz, 1780 W 30 psi (206 kPa) min. - 80 psi (551 kPa) max. cUL, cUPC, NOM
Thank You For Choosing Kohler Company
Thank you for choosing Kohler Co. Your Kohler Co. product reflects the true passion for design,
craftsmanship, artistry, and innovation Kohler Co. stands for. We are confident its dependability and beauty
will surpass your highest expectations, satisfying you for years to come.
All information in this guide is based upon the latest product information available at the time of
publication. At Kohler Co. we strive to fulfill our mission of improving the level of gracious living for each
person who is touched by our products and services. We reserve the right to make changes in product
characteristics, packaging, or availability at any time without notice.
Please take a few minutes to review this guide. Pay special attention to the care and cleaning instructions.
Compliance
FCC ID: N82-KOHLER009 – Compliance Statement (Part 15.19)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired
operation.
Warning (Part 15.21)
Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
FCC Interference Statement (Part 15.105 (b))
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Warning
1212876-5-B 2 Kohler Co.

Proof
Features
NOTE: Many of the features listed here can be adjusted, enabled or disabled using the remote control.
Specific directions for these procedures are listed later in this manual.
NOTE: There are different remote control options. The premium remote control is shown.
Flushing and Operation Features
Two Flushing Options - (not shown) Users may choose [flush-eco] for a .6 gallon (2.27 L) or
[flush-full] for a 1.28 gallon (4.5 L) flush.
Automatic Flushing - (not shown) When enabled, this feature automatically flushes the toilet 6
seconds after the user stands up, 60 seconds after use with the seat in the raised position when the
seat is lowered, or automatically after 60 seconds.
Front Motion Sensor - When auto open/close is enabled, the cover opens automatically when the
motion sensor is activated. The sensitivity of the front motion sensor can be adjusted to [near],
[medium],or[far] using the remote control. The toilet arrives with this feature enabled.
Auto Open Seat Sensor - When enabled, this feature automatically opens the seat when the motion
sensor light on the right side of the toilet senses movement. The light on the right side of the toilet,
which is projected on the floor, allows the seat to be raised and lowered without touching the toilet.
Break the beam of light using your foot to open or close the seat. The toilet arrives with this feature
enabled.
Animated Flush - When animated flush is enabled a graphic will appear on the remote control
detailing the progress of the flushing process. The toilet arrives with this feature enabled.
Toilet Sleep Mode - The toilet can be programmed to conserve energy. When toilet sleep mode is
enabled the toilet will enter and exit an energy conservation mode at the times programmed. The
toilet arrives with this feature disabled.
Manual
Controls
Auto Open Ring
Motion Sensor
Air Outlet -
Feet Heater
Remote
Control
Docking
Station
AUX In
Ambient Light
Bidet Wand
Bowl Light
Lid
Ring
1212876-5-B 4 Kohler Co.

Proof
Features (cont.)
Deodorizer - The deodorizer eliminates or reduces unpleasant odors when enabled. It will begin
operation when the user sits down. The toilet arrives with the deodorizer feature enabled.
Manual Controls - Allows the user to control basic toilet features without the remote control.
Bidet Features
Front/Rear Wash - Front and rear wash feature adjustable positioning, adjustable water temperature,
adjustable water pressure, and pulsate and oscillate water action.
Dryer - The dryer features adjustable air temperature and pressure.
Bidet Wand - The bidet wand features self cleaning UV options, lighted tip, and removable spray
tip for servicing. The wand can be manually extended for cleaning using the remote control.
Lighting
Ambient Light - Light located on the back sides of the toilet. Gently illuminates the area around the
toilet. Color of the light and brightness is adjustable. Factory default is white.
Bowl Light - Light located on the end of the bidet wand that illuminates the bowl when the toilet is
activated. The light will only activate when the room is dark. The toilet arrives with this feature
enabled.
Welcome Light - When enabled, the ambient light will automatically turn on when the toilet is
activated. The toilet arrives with this feature enabled.
Night Light - The bowl light and ambient light will automatically turn on in low light conditions
when this feature is enabled. The toilet arrives with this feature enabled.
Heating
Heated Feet - When activated, warm air emanates from the air outlet to warm the users’ feet.
Heated Seat - (not shown) When activated, the seat features an adjustable heating option that will
keep the seat warm. The toilet arrives with this feature enabled.
Music and Sounds
Music - Your toilet is equipped with FM radio, pre-loaded music, Bluetooth
®
capability, SD card
capability, and the ability to play music from external sources.
Welcome Music - When enabled, welcome music will play upon activation of the toilet. The toilet
arrives with this feature disabled.
Key Sounds - When enabled, sounds will help indicate the activation of some toilet functions.
NOTE: MP3 and WMA formats are supported by the software. MP4 files are not supported and will not
work.
Aux In - Any type of standard auxiliary music player can be plugged in at one of the two locations
on the docking station or the back of the toilet. Music from the player can be played on the toilet.
Bluetooth - Music can be streamed from any Bluetooth enabled device.
SD Card- An SD card loaded with music files can be inserted in the slot on the back of the toilet.
Maximum capacity is 16 GB.
Cleaning
Automatic Wand Cleaning - Wand cleaning can be programmed using your remote control. It is a
two stage cleaning that rinses the wand with water, then bathes the wand in UV light. This feature
comes enabled, scheduled to occur at 2:00 am every day.
Backup Power
Kohler Co. 5 1212876-5-B

Proof
Features (cont.)
Battery Backup - A battery pack located on the back of the toilet is designed to provide emergency
power in the event of a power outage. The battery pack requires eight AA batteries. The batteries
may be kept in the battery pack or loaded at the time of a power outage.
1212876-5-B 6 Kohler Co.

Proof
Features - Back Panel
Power Button - Turns the power on and off.
Auxiliary Input - Plug in any standard external music source to play the music through the
speakers.
Deodorizer - The deodorizer eliminates or reduces unpleasant odors when enabled. It will begin
operation when the user sits down. The toilet arrives with the deodorizer feature enabled. The
deodorizer cartridge should be replaced when it loses effectiveness.
Speakers - Internal speakers.
Supply Hose - Water supply hose.
Air Filter - Filters air before it enters the blower for the bidet dryer and heated feet option. The
filter should be checked once every six months and cleaned if needed.
External Speaker Output - Allows additional speakers to be connected to the system.
Docking Station Power Cord Connection - Docking station power is connected here.
External Antenna - Optional FM antenna (included) is connected here.
SD Card Slot - Insert an SD card loaded with music in the slot.
USB Connection - USB port for authorized personnel to update the on-board software.
Backup Battery - Holds eight AA batteries that will flush the toilet in the event of a power outage.
The batteries are not required for normal operation and may be installed at the time of the outage.
Power Button
Deodorizer
Docking Station
Power Cord Connection
External Speaker Outlets Air Filter
Supply Hose
Speakers
Auxiliary Input
External Antenna
Battery Backup
USB Port
SD Card Slot
Kohler Co. 7 1212876-5-B

Proof
Manual Operation
The basic functions of the toilet can be controlled manually using the buttons located on the right side of
toilet.
Cover and Seat - The cover and seat can be lifted manually to open and close them. Gently lift the
cover and seat to open them.
Flushing - Push the flush button to flush the toilet manually.
NOTE: Someone must be seated on the bidet when the manual buttons are used. When the bidet features
are activated using the manual buttons, they will default to the middle temperature, pressure, and position
settings.
Front Wash - Push the front wash button to activate the bidet wand for front wash.
Rear Wash - Push the rear wash button to activate the bidet wand for rear wash.
Dryer - Push the dryer button to activate the dryer.
Cleaning the Bidet Wand - Press and hold the front or rear button for 2 seconds to extend the
wand for manual cleaning. Repeat to retract the wand.
Manual
Controls Dryer
Bidet Rear Wash
Bidet Front Wash
Flush
1212876-5-B 8 Kohler Co.

Proof
Servicing the Toilet
Servicing the Deodorizer
NOTE: The deodorizer should be replaced every two years or when its performance is decreasing.
Remove the deodorizer cartridge assembly by grasping it and gently pulling it out.
Remove the filter from the housing by pushing it through the back side from the vented side.
Insert the replacement filter into the housing.
Reinstall the deodorizer cartridge assembly.
Servicing the Air Filter
NOTE: This procedure should be performed once a year or more often as needed.
Remove the air filter cover.
Remove the air filter.
Clean the air filter using water.
Dry the air filter.
Reinstall the air filter.
Reinstall the air filter cover.
Servicing the Inlet Screen
NOTE: This procedure should be performed once every six months.
Air Filter Cover Air Filter Inlet Screen
Deodorizer
Cartridge
Filter
Kohler Co. 9 1212876-5-B

Proof
Servicing the Toilet (cont.)
Turn off the water at the water supply stop or main water supply if the supply stop is not
accessible.
Remove the back cover (not shown) if installed.
Remove the clip securing the water supply hose to the water inlet.
Remove the hose from the water supply inlet.
Use an ″L″shaped or needle nose pliers to remove the inlet screen from the water inlet.
Clean all hard water deposits and other material from the inlet screen.
Inspect the inlet screen. If it is in good condition, reinstall it. If the screen is worn or damaged,
replace it.
To reinstall the inlet screen, insert the inlet screen into the inlet aligned as shown.
Reinstall the water supply hose and secure using the clip.
Reinstall the cover (if removed).
Turn on the water supply and check for leaks.
1212876-5-B 10 Kohler Co.

Proof
Servicing the Toilet
Servicing the Bidet Wand Spray Tip
NOTE: The bidet wand spray tip can become clogged with mineral deposits from the water. It should be
cleaned periodically. The length of time between each cleaning will depend upon water quality. If
performance is poor, the spray tip should be cleaned.
Select [settings].
Select [cleaning].
Select [manual clean].
Select [extend wand]. The bidet wand will deploy.
Manually clean the bidet wand.
Remove the bidet wand spray tip by inserting a small thin object into the hole on the underside of
the wand, pushing the spray tip up.
Inspect the spray tip. If there is mineral buildup in the spray tip, remove the minerals by soaking
the spray tip in a cleaning solution until the minerals are gone.
Remove any mineral deposits from the spray tip opening in the bidet wand.
Replace the spray tip if needed.
Reinstall the spray tip once it is clean or install a new spray tip. Make sure the tip is flush with the
surrounding surfaces on the wand. If the spray tip is not flush, it may be damaged or stick as the
wand retracts.
Select [close] when the spray tip has been reinstalled.
Select [home] to return to the main screen or [back] to return to the previous screen.
Care and Cleaning
WARNING: Risk of property or product damage. Do not use in-tank cleaners in your toilet.
Products containing chlorine (calcium hypochlorite) can seriously damage fittings in the tank. This
damage can cause leakage and property damage.
Spray Tip
Bidet
Wand
Bidet
Light
Kohler Co. 11 1212876-5-B

Proof
Care and Cleaning (cont.)
Kohler Co. shall not be responsible or liable for any tank fitting damage caused by the use of cleaners
containing chlorine (calcium hypochlorite).
For best results, keep the following in mind when caring for your KOHLER product:
•Always test your cleaning solution on an inconspicuous area before applying to the entire surface.
•Wipe surfaces clean and rinse completely with water immediately after applying cleaner. Rinse and
dry any overspray that lands on nearby surfaces.
•Do not allow cleaners to soak on surfaces.
•Use a soft, dampened sponge or cloth. Never use an abrasive material such as a brush or scouring
pad to clean surfaces.
•For Artist Edition Toilets: Treat your decorative product just as you would treat your fine china.
DO NOT use bristle brushes or abrasive-backed sponges. They will scratch decorative surfaces. Use
only warm water to clean. Dry with a cotton cloth or soft sponge.
For detailed cleaning information and products to consider, visit www.kohler.com/clean. To order Care &
Cleaning information, call 1-800-456-4537.
Troubleshooting
NOTE: When the remote control is not in use, it will enter standby mode. Press any key on the remote
control screen to activate the screen.
NOTE: If the back light in the window is off, the first touch on the remote control screen activates the
light. The second touch activates the function.
Start-up
When the toilet is first installed or the power fails, when power is restored or turned on the toilet
will automatically go into start-up mode.
If the toilet does not function correctly upon completing the start-up sequence, or it fails to start,
contact the Customer Care Center using the numbers located on the back page of this manual.
Blockage
To clear the toilet when there is a blockage, a standard plunger with an insert works best. Use the
remote control to open the valve before using the plunger.
If a blockage requires the use of a snake, use the remote control to open the valve before using the
snake. Close the valve when the blockage is cleared.
Small Children
The auto flush and bidet features require a sensor located under the seat to be enabled. Small
children may not be tall enough (approximately 48″(1.2 m) to activate the sensor. The bidet and
autoflush features will not function correctly when this sensor has not been activated.
Flushing Troubleshooting
Symptoms Probable Causes Recommended Action
1. Toilet does not flush. A. Toilet is blocked. A1. Open the trapway valve using the
remote control; select [settings] >
[cleaning] >[manual clean] >[open
bowl valve]. Use a plunger to
remove the blockage. For extreme
blockage a snake may be used.
A2. Call the Customer Care Center
using the information provided on
the back page of this manual.
1212876-5-B 12 Kohler Co.

Proof
Troubleshooting (cont.)
Symptoms Probable Causes Recommended Action
B. Remote control is not linked to
the toilet. B1. Reconnect the toilet using the remote control and selecting;
[settings] >[maintenance] >[learn
remote], then following the
directions on the remote control
screen.
B2. Call the Customer Care Center
using the information provided on
the back page of this manual.
C. Remote control is not working. C. See the Remote Control
Troubleshooting section in the
remote control Homeowners Guide.
D. The trapway valve is not
opening or has an obstruction. D. Use the remote control to open and close the trapway several times by
selecting; [settings] >[cleaning] >
[manual clean] >[open bowl
valve] >[close] repeatedly.
2. Automatic flush does not
work. A. Automatic flush is not enabled. A. Use the remote control to enable automatic flush by selecting;
[settings] >[feature settings] >
[flushing] >[auto flush].
B. User is a small child. B. The automatic flush feature
requires a sensor under the seat to
be enabled. Children less than 48″
(1.2 m) tall may not activate this
sensor. Flush the toilet using the
remote control.
3. There is no water flow to
the toilet. A. Water supply is not turned on. A. Clean or replace the inlet screen following the directions in the
servicing section of this manual.
B. Inlet screen is blocked. B. Turn on the main water supply.
4. The toilet flushes
unexpectedly. A. Automatic flush is enabled. A. When automatic flush is enabled the toilet will flush 6 seconds after
the user stands up. To disable the
automatic flush, on the remote
control select; [settings] >[feature
settings] >[flushing] >[auto
flush]. The check mark and [auto
flush] will appear grey when the
feature is disabled.
B. The overflow sensor is
activated. B1. No action is needed if occurrence of the toilet flushing by itself is
isolated. When the overflow sensor
is activated it will automatically
flush the toilet to lower the water
level.
B2. If unexpected flushing occurs
repeatedly call the Customer Care
Center using the information
provided on the back page of this
manual.
5. The water level in the
bowl is too high. A. The toilet has a blockage. A. Open the trapway valve using the remote control; select [settings] >
[cleaning] >[manual clean] >
[open bowl valve]. Use a plunger
to remove the blockage. For
extreme blockage a snake may be
used.
Kohler Co. 13 1212876-5-B

Proof
Troubleshooting (cont.)
Symptoms Probable Causes Recommended Action
6. There is no water in the
bowl or the water slowly
dissipates.
A. The water has evaporated when
there is extended period of time
between uses.
A. Flush the toilet to refill the bowl.
B. There is a blockage that does
not allow the trapway valve to
close all the way.
B1. Use the remote control to open and
close the trapway valve several
times by selecting; [settings] >
[cleaning] >[manual clean] >
[open bowl valve] >[close]
repeatedly.
B2. Open the trapway valve using the
remote control; select [settings] >
[cleaning] >[manual clean] >
[open bowl valve]. Use a plunger
to remove the blockage. For
extreme blockage a snake may be
used.
Cover and Seat Troubleshooting
Symptoms Probable Causes Recommended Action
1. Cover strikes back wall
when opening. A. Flange rough-in is too close to the wall. Rough-in should be
minimum of 11-3/4″(298 mm).
A1. Adjust the finished wall or flange to
an 11-3/4″(298 mm) or greater
rough-in.
A2. Call the Customer Care Center
using the information provided on
the back page of this manual.
2. Cover and/or seat does
not open automatically. A. Sensors are not enabled. A. Use the remote control to enable the sensors by selecting; [settings] >
[feature settings] > and [near],
[medium] or [far].
B. Sensor lenses are blocked. B. Clean all dirt or debris away from
the sensor lens. The lens is located
on the right side of the toilet next
to the heated feet air outlet.
C. Motion sensor is not set with
the correct sensitivity level. C1. Use the remote control to enable the sensor by selecting; [settings] >
[feature settings] > and [near],
[medium] or [far].
C2. Call the Customer Care Center
using the information provided on
the back page of this manual.
3. Cover sways when it
reaches the full open
position.
A. Some cover sway is normal. A1. No action required for minimal
cover sway.
A2. Call the Customer Care Center
using the information provided on
the back page of this manual.
1212876-5-B 14 Kohler Co.

Proof
Troubleshooting (cont.)
Symptoms Probable Causes Recommended Action
4. Seat fails to open when
side sensor is activated. A. Sensor is not enabled. A. Use the remote control to enable the sensors by selecting; [settings] >
[feature settings] > and [near],
[medium] or [far].
B. Side sensor lens is blocked or
dirty. B. Clean all dirt or debris away from the sensor lens. The lens is located
on the right side of the base of the
toilet near the middle.
C. Sensor is not set with the
correct sensitivity level. C1. Use the remote control to enable the sensors by selecting; [settings] >
[feature settings] > and [near],
[medium] or [far].
C2. Call the Customer Care Center
using the information provided on
the back page of this manual.
5. Cover and/or seat raises
when it should not. A. Sensor sensitivity is set too high. A. Use the remote control to change the sensor setting by selecting;
[settings] >[feature settings] > and
[near] or [medium].
B. There is an object in the hinge
area of the cover. B1. There is a sensor located in the hinge to avoid pinching. Remove
any objects from the hinge area.
B2. Call the Customer Care Center
using the information provided on
the back page of this manual.
Bidet Troubleshooting
Symptoms Probable Causes Recommended Action
1. Bidet wand fails to fully
retract. A. Cleaning cycle of bidet was interrupted. A. Retract the bidet wand using the remote control by selecting;
[settings] >[cleaning] >[manual
clean] >[extend wand] >[close].
B. The bidet wand spray tip is not
installed correctly. B1. Reinstall the bidet wand spray tip following the servicing instructions
in this document.
B2. Call the Customer Care Center
using the information provided on
the back page of this manual.
2. The bidet wand does not
full extend, and while
activated emits a grinding
noise.
A. The seal protecting against
waterflow into the bidet is dry. A1. Enable the light using the remote control by selecting; [settings] >
[cleaning] >[manual clean] >
[extend wand]. Clean the bidet
wand using a liberal application of
liquid soap. After rinsing the wand,
apply more liquid soap for
lubrication and select [close] on the
remote control.
3. The bowl light, located in
the tip of the bidet wand,
does not work.
A. The light is not enabled. A1. Enable the light using the remote
control by selecting; [settings] >
[feature settings] >[lighting] >
[bowl light] >[home].
A2. Call the Customer Care Center
using the information provided on
the back page of this manual.
Kohler Co. 15 1212876-5-B

Proof
Troubleshooting (cont.)
Symptoms Probable Causes Recommended Action
4. Bidet wand partially
retracts, hesitates, then
fully retracts.
A. This is proper operation. When
the bidet wand hesitates it is
being rinsed off, then it fully
retracts.
A. No action needed.
5. Bidet wand moves
erratically or stops. A. The bidet wand cycle was interrupted. A1. Turn the power to the toilet off using the power button on the back
of the toilet, wait 10 seconds, turn
the power back on.
A2. Call the Customer Care Center
using the information provided on
the back page of this manual.
6. Bidet dryer air is too hot. A. Temperature is set too high. A1. Lower the dryer air temperature
using the remote control by
selecting; [dryer] > and moving the
[temp.] scroll bar lower.
A2. Call the Customer Care Center
using the information provided on
the back page of this manual.
7. Bidet dryer does not start
immediately. A. The wand has not completed retracting after the bidet wash
cycle has been completed.
A. There is a brief delay while the
wand fully retracts, then extends
again for the dryer cycle.
8. Bidet wand fails to
extend, bidet functions
cannot be activated.
A. The user is a small child. A. The bidet functions require a sensor
under the seat to be activated.
Children less than 48″(1219 mm)
tall may not activate this sensor.
Flush the toilet using the remote
control.
B. The remote control battery is
out of power. B. Charge the remote control by placing it on the docking station.
C. The bidet wand is not
responding to the remote. C1. Turn the power to the toilet off using the Power button on the back
of the toilet, wait 10 seconds, turn
the power back on.
C2. Call the Customer Care Center
using the information provided on
the back page of this manual.
Power Troubleshooting
Symptoms Probable Causes Recommended Action
1. There is no power to the
toilet. A. Toilet is not plugged in or the GFCI is tripped. A. Plug in the toilet or confirm the GFCI has not been tripped.
2. Toilet beeps when
unplugged or plugged in. A. This is normal operation. A. No action needed.
3. Remote control tells you
the backup battery is low. A. Backup battery is dead. Note: The battery is only needed
when there is a power outage. It
is not required for normal
usage.
A. The backup battery is located in an
area that should only be serviced
by a KOHLER Certified Service
Representative. Call the Customer
Care Center using the information
provided on the back page of this
manual.
Lights Troubleshooting
1212876-5-B 16 Kohler Co.

Proof
Troubleshooting (cont.)
Symptoms Probable Causes Recommended Action
1. Back panel lights do not
illuminate. A. Light is not enabled. A. Activate the light using the remote control by selecting: [lighting] and
moving the scroll bar up for
[ambient light].
B. Light is burned out. B. Call the Customer Care Center
using the information provided on
the back page of this manual.
2. The bowl light is
unexpectedly blinking at
night.
A. The light is the UV cleaning
indicator. The UV cleaning cycle
is in process.
A. No action needed.
3. The welcome light and/or
night light are not lit. A. The welcome light and/or night light are not enabled. A. Using the remote control, enable the lights by selecting: [settings] >
[feature settings] >[lighting] and
then enabling the desired features
by selecting the corresponding
radio button.
Music and Sounds Troubleshooting
Symptoms Probable Causes Recommended Action
1. Music will not play. A. External speakers are selected,
but there are no external
speakers connected.
A. Using the remote control, change the
speakers setting by selecting:
[music] >[options] >[toilet]
B. Volume is all the way down. B. Using the remote control, adjust the
volume setting by selecting: [music]
>[zen] or [aux] and adjust the
[volume] scroll bar up.
C. The device being used to input
the music is not campatible. C. Use a different device to input the music.
2. The key sounds are not
audible when toilet is in
use.
A. The key sounds are not
enabled. A. Using the remote control, enable the key sounds by selecting: [settings] >
[feature settings] >[key sound] >
[enable].
Warranty
THREE YEAR LIMITED WARRANTY FOR VITREOUS CHINA COMPONENT
THREE YEAR LIMITED WARRANTY FOR MECHANICAL PARTS
Kohler Co. warrants the vitreous china component on the KOHLER Numi toilet to be free of defects in
material and workmanship during normal residential use for three (3) years from the date of installation.
Kohler Co. will further warrant all mechanical parts in the KOHLER Numi toilet to be free of defects in
material and workmanship during normal residential use for three (3) years from the date of installation.
This warranty only applies to the KOHLER Numi toilet when installed in the United States of America and
Canada.
If a defect is found in normal use, Kohler Co. will, at its election, repair, replace or make appropriate
adjustment where Kohler Co. inspection discloses any such defects. Damage caused by accident, misuse or
abuse is not covered by this warranty. This warranty expressly excludes labor charges, removal charges,
installation, or other incidental or consequential costs. Improper care and cleaning will void the warranty.
Use of in-tank toilet cleaners will void the warranty. In no event shall the liability of Kohler Co. exceed the
purchase price of the product.
If you believe that you have a warranty claim, contact your Dealer, Plumbing Contractor, Home Center or
E-tailer, or by writing Kohler Co., Attn: Customer Care Center, 444 Highland Drive, Kohler, WI 53044, USA.
Kohler Co. 17 1212876-5-B

Proof
Warranty (cont.)
Please be sure to provide all pertinent information regarding your claim, including a complete description of
the problem, the product, model number, color, the date the product was purchased and from whom the
product was purchased. Also include your original receipts. For other information or to obtain the name and
address of the service and repair facility nearest you, call 1-800-4KOHLER (1-800-456-4537) from within the
USA and Canada and 001-800-456-4537 from within Mexico.
KOHLER CO. AND/OR SELLER ARE PROVIDING THESE WARRANTIES IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. KOHLER CO.
AND/OR SELLER DISCLAIM ANY LIABILITY FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES. Some states/provinces do not allow limitations on how long an implied warranty lasts, or the
exclusion or limitation of special, incidental or consequential damages, so these limitations and exclusions
may not apply to you. This warranty gives you specific legal rights. You may also have other rights which
vary from state/province to state/province.
This is Kohler Co.’s exclusive written warranty.
1212876-5-B 18 Kohler Co.

Proof
Guide du propriétaire
W.C.
Informations importantes
LIRE ET SUIVRE TOUTES LES INSTRUCTIONS
CONSERVER CES INSTRUCTIONS
Informations importantes
UGS Système électrique Pression d’alimentation en eau Listes
K-3901 120 V, 15/A min., 20 A
recommandés, 60 Hz, 1780 W 30 psi (206 kPa) min. - 80 psi (551 kPa) max. cUL, cUPC, NOM
Merci d’avoir choisi Kohler Company
Merci d’avoir choisi Kohler Co. Votre produit Kohler Co. est l’image d’une passion véridique pour le design,
l’artisanat, le caractère artistique, et l’innovation, des éléments de première importance pour Kohler Co. Nous
sommes certains que sa fiabilité et sa beauté surpasseront vos plus grandes attentes, et vous satisferont pour
de nombreuses années à venir.
Toutes les informations de ce guide sont fondées sur les dernières informations de produit disponibles au
moment de la parution. Chez Kohler Co., nous faisons tout notre possible pour remplir notre mission, soit
celle d’améliorer le niveau d’une façon de vivre agréable pour chaque personne touchée par nos produits et
nos services. Nous nous réservons le droit d’effectuer des changements au niveau des caractéristiques, de
l’emballage ou de la disponibilité des produits en tout temps, sans avis préalable.
Veuillez prendre quelques minutes pour réviser ce guide. Faites particulièrement attention aux instructions
d’entretien et de nettoyage.
Conformité
ID FCC: N82-KOHLER009 – Déclaration de conformité (Partie 15.19)
Cet appareil est conforme à la section 15 des réglementations FCC. L’appareil est soumis aux deux conditions
d’exploitation suivantes:
1. Cet appareil ne doit pas causer d’interférences nuisibles, et
2. Cet appareil doit accepter toutes les interférences reçues, y compris celles qui pourraient causer des
opérations non souhaitées.
Danger (Partie 15.21)
Tous changements ou modifications non expressément approuvés par la partie responsable garantissant la
conformité, pourraient annuler le droit à l’utilisateur d’opérer l’équipement.
Déclaration de conformité FCC (Partie 15.105 (b))
Cet appareil a été testé et est considéré conforme aux limitations d’un appareil numérique de classe B, selon
la section 15 des réglementations FCC. Ces limites sont conçues pour fournir une protection raisonnable
contre toute interférence nuisible lors d’une installation résidentielle. Cet appareil génère, utilise et peut
émettre une énergie de radiofréquence et, s’il n’est pas installé et utilisé conformément aux instructions,
pourrait être la cause d’interférences nuisibles aux communications par radio. Cependant, il n’est pas garanti
Kohler Co. Français-1 1212876-5-A