Kolpin Outdoors 25-0400 Instruction sheet
1
© 2019 Kolpin Outdoors Inc. REV 00
Before You Begin: Read these instructions and check to be sure all parts and tools are accounted for. Please retain
these installation instructions for future reference and parts orderin information.
Note: If any hardware is missing, do not return to the store. Call us to help, Toll Free 1-877- 56-5746.
4-Ton Snatch Block Pulley
Product Instructions | Part No: 25-0400
When properly used, the snatch block allows you to increase
your winch’s pullin power and chan e your pullin direction
without dama in the cable.
Change the ulling direction:
To prevent the cable from collectin on one side of the winch spool while winchin , utilize a strai ht line from
the winch to the object bein pulled. You can chan e your pullin direction and still allow the cable to be 90°
to wind properly on the spool by securin the snatch block to a point directly in front of the vehicle. Secure the
recovery strap or choker chain to an anchor point.
Snatch Block
Anchor Point
Use a clevis D-shackle to safely connect the
snatch block to a choke chain or looped ends of
recovery strap.
Use a choker chain to hook-up to another
vehicle or sharp objects for an anchor point.
When trees are used as an anchor point, use a
recovery tree trunk strap to prevent dama e.
Strai ht-line to Winchin Vehicle
Recovered Vehicle
2
© 2019 Kolpin Outdoors Inc. REV 00
For additional assistance, please contact Kolpin customer service department at
One Year Limited Warranty
For the period of one (1) year from the purchase date, Kolpin will replace for the ori inal purchaser, free of char e, any part or parts
found upon examination by Kolpin to be defective in material, workmanship, or both.
All transportation costs incurred submittin product to Kolpin for warranty consideration must be borne by the purchaser. If Kolpin
determines that the product must be returned to the factory for credit, please call 1-877-956-5746 for a Return Merchandise
Authorization (RMA) number and shippin instructions.
This warranty does not apply to parts that have been dama ed by accident, alteration, abuse, improper maintenance, normal wear, or
other causes beyond the manufacturer’s control. In order to protect you and your ATV, certain parts of the accessory system and/or
hardware are desi ned to fail when the equipment is over-stressed. Parts that are lost due to loosenin and improper maintenance
are not covered under warranty. This warranty does not cover removal or reinstallation labor fees of the plow system and related
components.
Peripheral products such as en ines, electric motors, and actuators may carry an ori inal manufacturer’s warranty. Most hardware is
eneral in nature and is easily obtained locally. Be sure to replace with minimum metric class 8.8 specification.
Snatch Block
Anchor Point
Strai ht-line to Vehicle Winch
From Vehicle Tow Hook Point
Increase ulling ower:
You may have recovery cases where more pullin power is needed. The snatch block pulley increases the
mechanical advanta e and that increases pullin power. Pullin power decreases with the number of layers
of cable on winch spool, you can use a snatch block to double line out more cable. More cable out reduces
the number of layers on winch spool and increases pullin power. Start by feedin out enou h cable to free
the winch hook. Attach the hook to vehicle tow hook point and run cable throu h snatch block. Pull out
enou h cable to reach your anchor point. Secure the recovery strap or choker chain to an anchor point. Usin
a clevis shackle, attach the snatch block to the two ends of the recovery strap or choker chain.
Table of contents
