Komo Electric flour sieve User manual

Service
Need help? Please contact us during our normal business hours
In Germany (+49)
Phone: [phone] or Fax: [phone]
KoMo GmbH
Habitzheimer Straß
e 14, 64853 Otzberg
-
Lengfeld
[email protected]
Or in Austria (+43)
Phone: [phone] or Fax: [phone]
Koidl KG
Penningdörfl 6, 6361 Hopfgarten/Tirol
[email protected]
www.frischmahlen.com
Date of purchase and company stamp
Electric flour sieve
for
Grainmills
User’smanual

Dear customer,
We are pleased that you have decided to purchase a screen attachment
for KoMo grain mills. We are sure that the device will be a valuable help in
any cooking activities. Please read this short User’s Manual before putting
your screen attachment into use. W
e collected all the information which is
relevant for the unproblematic usage of your screen attachment to your full
satisfaction for many years.
Your KoMo
-
Team
How to mount the screen attachment or how to take the screen
attachment into operation for KoMo grain mills?

Unscrew the funnel of your grain mill and remove the upper stone
(picture 1 + picture 2)

Place the supplied ring (
hard stone disc without stone) properly
onto the milling chamber (picture 3).

Place the screen attachment and the Plexiglas cylinder onto the
milling chamber and turn them clockwise for about one turn. Then
switch the mill on and continue to turn until t
he brush rotor starts to
rotate. Now turn again by ¼ turn.

Switch off the grain mill and fill freshly ground seeds into the screen
attachment.

Put the lid onto the screen device.

Switch the grain mill on and screen th
e grist.

Switch the grain mill off after screening.

Remove screen device and ring.

Attach the milling stone and fix the funnel.
How to replace the screen inserts?

Remove the Plexiglas tube with a start in an upward direction
(picture 1).

Unsc
rew strip brush holder (left hand thread, unscrew clockwise),
hold on the bottom side (picture 2 and picture 3)

Replace screen insert according to the desired mesh size (picture
4). Make sure that the flat side of the dark ring in the middle of the
plate
points upwards.

Reassemble the strip brush holder and attach the Plexiglas tube
until you feel the ball pins lock.
What can be screened with the screen attachment for KoMo grain
mills?

All types of grains from spelt to rice right up to corn.

No oilseeds or nuts.

Technical specifications: (subject to alternations)
Filling quantity:
400g
Diameter:
130mm
Weight:
900g
Mesh size screen insert 1 (fine)
0,63mm
Mesh size screen insert 2 (medium)
0,80mm
Mesh size screen insert 3 (coarse)
1,25mm
Material lid:
solid beech, oiled
Material connecting element:
beech multiplex, oiled
Material cont
ainer:
Plexiglas
Warranty:
3 years