Konica Minolta BIZHUB C450P User manual

User’s Guide

Introduction
C450P x-1
Introduction
Thank you for choosing this machine.
This manual contains details on the operation of the various functions of the
machine, precautions on its use, and basic troubleshooting procedures. In
order to ensure that this machine is used correctly and efficiently, carefully
read this manual before using the machine. After reading the manual, store
it in the designated holder so that it can easily be referred to when questions
or problems arise during operation.
The illustrations used in this manual may appear slightly different from views
of the actual equipment.
Energy Star®
As an Energy Star®Partner, we have determined that this machine meets the
Energy Star®Guidelines for energy efficiency.
What is an Energy Star®product?
An Energy Star®product has a special feature that allows it to automatically
switch to a “low-power mode” after a period of inactivity. An Energy Star®
product uses energy more efficiently, saves you money on utility bills and
helps protect the environment.

Introduction
x-2 C450P
Trademarks and registered trademarks
KONICA MINOLTA, KONICA MINOLTA Logo, and The essentials of imaging
are registered trademarks or trademarks of KONICA MINOLTA HOLDINGS,
INC.
PageScope and bizhub are registered trademarks or trademarks of KONICA
MINOLTA BUSINESS TECHNOLOGIES, INC.
Netscape Communications, the Netscape Communications logo, Netscape
Navigator, Netscape Communicator, and Netscape are trademarks of Net-
scape Communications Corporation.
This machine is based in part on the work of the Independent JPEG Group.
Compact-VJE
Copyright 1986-2003 VACS Corp.
RC4®is a registered trademark or trademark of RSA Security Inc. in the Unit-
ed States and/or other countries.
RSA®is a registered trademark or trademark of RSA Security Inc. RSA
BSAFE®is a registered trademark or trademark of RSA Security Inc. in the
United States and/or other countries.
License information
This product includes RSA BSAFE Cryptographic software
from RSA Security Inc.
OpenSSL Statement
OpenSSL License
Copyright ©1998-2000 The OpenSSL Project. All rights reserved.
Redistribution and use in source and binary forms, with or without modifica-
tion, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright no-
tice, this list of conditions and the following disclaimer in the documen-
tation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must
display the following acknowledgment:
“This product includes software developed by the OpenSSL Project for
use in the OpenSSL Toolkit. (http://www.openssl.org/)”

Introduction
C450P x-3
4. The names “OpenSSL Toolkit” and “OpenSSL Project” must not be used
to endorse or promote products derived from this software without prior
written permission. For written permission, please contact openssl-
[email protected].
5. Products derived from this software may not be called “OpenSSL” nor
may “OpenSSL” appear in their names without prior written permission
of the OpenSSL Project.
6. Redistributions of any form whatsoever must retain the following ac-
knowledgment:
“This product includes software developed by the OpenSSL Project for
use in the OpenSSL Toolkit (http://www.openssl.org/)”
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT “AS IS” AND
ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIM-
ITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FIT-
NESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CON-
SEQENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCURE-
MENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
This product includes cryptographic software written by Eric Young
([e-mail]). This product includes software written by Tim Hud-
son ([e-mail]).
Original SSLeay License
Copyright ©1995-1998 Eric Young ([e-mail]) All rights reserved.
This package is an SSL implementation written by Eric Young (eay@crypt-
soft.com).
The implementation was written so as to conform with Netscapes SSL.
This library is free for commercial and non-commercial use as long as the fol-
lowing conditions are aheared to. The following conditions apply to all code
found in this distribution, be it the RC4, RSA, Ihash, DES, etc., code; not just
the SSL code.
The SSL documentation included with this distribution is covered by the
same copyright terms except that the holder is Tim Hudson (tjh@crypt-
soft.com).
Copyright remains Eric Young’s, and as such any Copyright notices in the
code are not to be removed. If this package is used in a product, Eric Young
should be given attribution as the author of the parts of the library used. This
can be in the form of a textual message at program startup or in documen-
tation (online or textual) provided with the package.

Introduction
x-4 C450P
Redistribution and use in source and binary forms, with or without modifica-
tion, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the copyright notice, this list
of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright no-
tice, this list of conditions and the following disclaimer in the documen-
tation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must
display the following acknowledgement:
“This product includes cryptographic software written by Eric Young
([email protected])”
The word ‘cryptographic’ can be left out if the rouines from the library be-
ing used are not cryptographic related :-).
4. If you include any Windows specific code (or a derivative thereof) from
the apps directory (application code) you must include an acknowledge-
ment:
“This product includes software written by Tin Hudson (tjh@crypt-
soft.com)”
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS” AND ANY EX-
PRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AU-
THOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCI-
DENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILI-
TY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
The licence and distribution terms for any publically available version or de-
rivative of this code cannot be changed. i.e. this code cannot simply be cop-
ied and put under another distribution licence [including the GNU Public
Licence.]
All other product names mentioned are trademarks or registered trademarks
of their respective companies

Introduction
C450P x-5
SOFTWARE LICENSE AGREEMENT
This package contains the following materials provided by Konica Minolta
Business Technologies, Inc. (KMBT): software included as part of the printing
system, the digitally-encoded machine-readable outline data encoded in the
special format and in the encrypted form (“Font Programs”), other software
which runs on a computer system for use in conjunction with the Printing
Software (“Host Software”), and related explanatory written materials (“Doc-
umentation”). The term “Software” shall be used to describe Printing Soft-
ware, Font Programs and/or Host Software and also include any upgrades,
modified versions, additions, and copies of the Software.
The Software is being licensed to you under the terms of this Agreement.
KMBT grants to you a non-exclusive sublicense to use the Software and
Documentation, provided that you agree to the following:
1. You may use the Printing Software and accompanying Font Programs for
imaging to the licensed output de-vice(s), solely for your own internal
business purposes.
2. In addition to the license for Font Programs set forth in Section 1 (“Print-
ing Software”) above, you may use Roman Font Programs to reproduce
weights, styles, and versions of letters, numerals, characters and sym-
bols (“Typefaces”) on the display or monitor for your own internal busi-
ness purposes.
3. You may make one backup copy of the Host Software, provided your
backup copy is not installed or used on any computer. Notwithstanding
the above restrictions, you may install the on any number of computers
solely for use with one or more printing systems running the Printing Soft-
ware.
4. You may assign its rights under this Agreement to an assignee of all of
Licensee’s right and interest to such Software and Documentation (“As-
signee”) provided you transfer to Assignee all copies of such Software
and Documentation Assignee agrees to be bound by all of the terms and
conditions of this Agreement.
5. You agree not to modify, adapt or translate the Software and Documen-
tation.
6. You agree that you will not attempt to alter, disassemble, decrypt, re-
verse engineer or decompile the Software.
7. Title to and ownership of the Software and Documentation and any re-
productions thereof shall remain with KMBT and its licensor.
8. Trademarks shall be used in accordance with accepted trademark prac-
tice, including identification of the trademark owner’s name. Trademarks
can only be used to identify printed output produced by the Software.
Such use of any trademark does not give you any rights of ownership in
that trademark.

Introduction
x-6 C450P
9. You may not rent, lease, sublicense, lend or transfer versions or copies
of the Software Licensee does not use, or Software contained on any un-
used media, except as part of the permanent transfer of all Software and
Documentation as described above.
10. IN NO EVENT WILL KMBT OR ITS LICENSOR BE LIABLE TO YOU FOR
ANY CONSEQUENTIAL, INCIDENTAL INDIRECT, PUNITIVE OR SPE-
CIAL DAMAGES, INCLUDING ANY LOST PROFITS OR LOST SAVING,
EVEN IF KMBT HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES, OR FOR ANY CLAIM BY ANY THIRD PARTY. KMBT OR ITS
LICENSOR DISCLAIMS ALL WARRANTIES WITH REGARD TO THE
SOFTWARE, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITA-
TION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT OF THIRD
PARTY RIGHTS. SOME STATES OR JURISDICTIONS DO NOT ALLOW
THE EXCLUSION OR LIMITATION OF INCIDENTIAL, CONSEQUENTIAL
OR SPECIAL DAMAGES, SO THE ABOVE LIMITATIONS MAY NOT AP-
PLY TO YOU.
11. Notice to Government End Users: The Software is a “commercial item,”
as that term is defined at 48 C.F.R.2.101, consisting of “commercial com-
puter software” and “commercial computer software documentation,” as
such terms are used in 48 C.F.R. 12.212. Consistent with 48 C.F.R.
12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4, all U.S. Govern-
ment End Users acquire the Software with only those rights set forth
herein.
12. You agree that you will not export the Software in any form in violation of
any applicable laws and regulations regarding export control of any
countries.

Introduction
C450P x-7
Contents
Introduction
Energy Star®..................................................................................... x-1
What is an Energy Star®product? ..................................................x-1
Trademarks and registered trademarks ......................................... x-2
SOFTWARE LICENSE AGREEMENT ............................................... x-5
Contents ............................................................................................ x-7
Explanation of manual conventions .............................................. x-17
1 Installation and operation precautions
1.1 Safety information ............................................................................ 1-3
Warning and precaution symbols .................................................. 1-3
Meaning of symbols ....................................................................... 1-3
1.2 Regulation notices .......................................................................... 1-10
CE Marking (Declaration of conformity) for users of the
European Union (EU) .................................................................... 1-10
USER INSTRUCTIONS FCC PART 15 - RADIO FREQUENCY
DEVICES (for U.S.A. users) .......................................................... 1-10
INTERFERENCE-CAUSING EQUIPMENT STANDARD
(ICES-003 ISSUE 4) (for Canada users) ....................................... 1-10
For users in countries not subject to class B regulations ............ 1-11
LED radiation safety ..................................................................... 1-11
Ozone release .............................................................................. 1-11
Acoustic noise (for European users only) ..................................... 1-12
For EU member states only ......................................................... 1-12
1.3 Caution notations and labels ......................................................... 1-13
1.4 Space requirements ....................................................................... 1-14
1.5 Operation precautions ................................................................... 1-15
Power source ............................................................................... 1-15
Operating environment ................................................................ 1-15
Storage of printed pages ............................................................. 1-15
1.6 Part names and their functions ..................................................... 1-16
Options ......................................................................................... 1-16
Outside of machine ...................................................................... 1-18
Inside of machine ......................................................................... 1-24
Finisher FS-603/punch kit ............................................................ 1-26
Finisher FS-507/job separator ..................................................... 1-28
Control panel ................................................................................ 1-31

Introduction
x-8 C450P
1.7 Basic operations ..............................................................................1-32
Turning on the machine ................................................................1-32
Turning off the machine ................................................................1-33
Automatically canceling the settings (automatic panel reset) .......1-34
Automatically conserving energy (Low Power mode) ...................1-34
Automatically conserving energy (Sleep mode) ............................1-35
1.8 Connecting to a computer ..............................................................1-36
Compatible interfaces ...................................................................1-36
2 Setting up the printer driver
2.1 About the provided printer drivers ...................................................2-3
Printer drivers and supported operating systems ..........................2-3
System requirements ......................................................................2-4
Setting up the system .....................................................................2-5
2.2 Installing the printer driver ...............................................................2-6
When used with Windows ..............................................................2-6
Automatic installation using the installer ........................................2-8
To install the printer driver ..............................................................2-9
Installing the printer driver using the Add Printer Wizard .............2-11
For Windows XP/Server 2003 .......................................................2-11
For Windows 98SE/Me/2000/NT 4.0 ............................................2-14
Installing the printer driver using Plug and Play ............................2-17
For Windows 98SE .......................................................................2-17
For Windows Me/2000 ..................................................................2-18
For Windows XP/Server 2003 .......................................................2-19
Uninstalling the printer driver ........................................................2-21
When used with Macintosh ..........................................................2-22
Installing the printer driver ............................................................2-22
For Mac OS X ...............................................................................2-22
Selecting a printer .........................................................................2-25
For Mac OS X ...............................................................................2-25
For Mac OS 9.2 .............................................................................2-28
Uninstalling the printer driver ........................................................2-30
For Mac OS X ...............................................................................2-30
For Mac OS 9.2 .............................................................................2-31
2.3 Printing operations ..........................................................................2-32
For Windows .................................................................................2-32
Printing operation .........................................................................2-32
Test printing ..................................................................................2-32
For Macintosh ...............................................................................2-33
Printing operation .........................................................................2-33
2.4 Setting up network printing ............................................................2-34
Overview of network functions .....................................................2-34

Introduction
C450P x-9
Network functions ........................................................................ 2-34
Features of the network functions ............................................... 2-35
Network connection methods that can be selected in each
Windows operating system .......................................................... 2-36
Specifying the TCP/IP settings .................................................... 2-38
Accessing PageScope Web Connection ..................................... 2-41
SMB printing ................................................................................ 2-42
Operations on this machine ......................................................... 2-42
Printer driver settings (For Windows 98SE/Me) ........................... 2-44
Printer driver settings (For Windows 2000/XP/Server 2003) ........ 2-44
LPR printing ................................................................................. 2-45
Operations on this machine ......................................................... 2-45
Printer driver settings (For Windows 2000/XP/Server 2003) ........ 2-45
Printer driver settings (For Windows NT 4.0) ............................... 2-46
Port 9100 printing (Windows 98SE/Me/2000/XP/Server 2003) ... 2-47
Operations on this machine ......................................................... 2-47
Printer driver settings (Windows 2000/XP/server 2003) .............. 2-47
Installing the Peer to Peer Printing Tool to connect using
Port 9100 (Windows 98SE/Me) .................................................... 2-49
Printer driver settings when the Peer to Peer Printing Tool is
installed to connect using Port 9100 (Windows 98SE/Me) .......... 2-49
IPP printing (Windows 2000/XP/Server 2003) ............................. 2-51
Operations on this machine ......................................................... 2-51
Installing the printer driver ........................................................... 2-52
Printing with NetWare .................................................................. 2-54
For remote printer mode with NetWare 4.x Bindery Emulation ... 2-54
For print server mode with NetWare 4.x Bindery Emulation ........ 2-56
For NetWare 4.x remote printer mode (NDS) ............................... 2-58
For NetWare 4.x/5.x/6 Print Server mode (NDS) ......................... 2-60
For NetWare 5.x/6 Novell Distributed Print Services (NDPS) ...... 2-62
Specifying client (Windows) settings when using the NetWare
server ........................................................................................... 2-63
Printing with Macintosh ............................................................... 2-65
Operations on this machine ......................................................... 2-65
Specifying the AppleTalk settings ................................................ 2-65
Specifying the Bonjour settings ................................................... 2-67
Specifying Macintosh settings ..................................................... 2-68
For Mac OS X ............................................................................... 2-68
For Mac OS 9.2 ............................................................................ 2-70
3 Specifying printer driver settings
3.1 Specifying the printer driver basic settings ................................... 3-3
For Windows .................................................................................. 3-3
To display the printer driver setup dialog box ............................... 3-3
For Macintosh ................................................................................ 3-5