Konica Minolta bizhub C451 User manual

User’s Guide [Copy Operations]

Introduction
C451 x-1
Introduction
Thank you for choosing this machine.
This manual contains details on the operation of the various functions of the
machine, precautions on its use, and basic troubleshooting procedures. In
order to ensure that this machine is used correctly and efficiently, carefully
read this manual as needed.
In order to operate the product safely and properly, be sure to read the ac-
companying Quick Guide [Copy/Print/Fax/Scan/Box Operations].
The illustrations used in this manual may appear slightly different from views
of the actual equipment.
OpenSSL Statement
OpenSSL License
Copyright ©1998-2005 The OpenSSL Project. All rights reserved.
Redistribution and use in source and binary forms, with or without modifica-
tion, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright no-
tice, this list of conditions and the following disclaimer in the documen-
tation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must
display the following acknowledgment:
“This product includes software developed by the OpenSSL Project for
use in the OpenSSL Toolkit. (http://www.openssl.org/)”
4. The names “OpenSSL Toolkit” and “OpenSSL Project” must not be used
to endorse or promote products derived from this software without prior
written permission. For written permission, please contact openssl-
[email protected].
5. Products derived from this software may not be called “OpenSSL” nor
may “OpenSSL” appear in their names without prior written permission
of the OpenSSL Project.
6. Redistributions of any form whatsoever must retain the following ac-
knowledgment:
“This product includes software developed by the OpenSSL Project for
use in the OpenSSL Toolkit (http://www.openssl.org/)”
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT “AS IS” AND
ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIM-

Introduction
C451 x-2
ITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FIT-
NESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CON-
SEQENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCURE-
MENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
This product includes cryptographic software written by Eric Young
([email protected]). This product includes software written by Tim Hudson
([email protected]).
Original SSLeay License
Copyright ©1995-1998 Eric Young ([e-mail]) All rights reserved.
This package is an SSL implementation written by Eric Young (eay@crypt-
soft.com).
The implementation was written so as to conform with Netscapes SSL.
This library is free for commercial and non-commercial use as long as the fol-
lowing conditions are aheared to. The following conditions apply to all code
found in this distribution, be it the RC4, RSA, Ihash, DES, etc., code; not just
the SSL code.
The SSL documentation included with this distribution is covered by the
same copyright terms except that the holder is Tim Hudson (tjh@crypt-
soft.com).
Copyright remains Eric Young’s, and as such any Copyright notices in the
code are not to be removed. If this package is used in a product, Eric Young
should be given attribution as the author of the parts of the library used. This
can be in the form of a textual message at program startup or in documen-
tation (online or textual) provided with the package.
Redistribution and use in source and binary forms, with or without modifica-
tion, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the copyright notice, this list
of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright no-
tice, this list of conditions and the following disclaimer in the documen-
tation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must
display the following acknowledgement:
“This product includes cryptographic software written by Eric Young
([e-mail])”
The word ‘cryptographic’ can be left out if the rouines from the library be-
ing used are not cryptographic related.

Introduction
C451 x-3
4. If you include any Windows specific code (or a derivative thereof) from
the apps directory (application code) you must include an acknowledge-
ment:
“This product includes software written by Tin Hudson (tjh@crypt-
soft.com)”
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS” AND ANY EX-
PRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AU-
THOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCI-
DENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILI-
TY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
The licence and distribution terms for any publically available version or de-
rivative of this code cannot be changed. i.e. this code cannot simply be cop-
ied and put under another distribution licence [including the GNU Public
Licence.]
All other product names mentioned are trademarks or registered trademarks
of their respective companies
Kerberos
Copyright © 1985-2005 by the Massachusetts Institute of Technology. All
rights reserved.
permission notice
WITHIN THAT CONSTRAINT, permission to use, copy, modify, and distrib-
ute this software and its documentation for any purpose and without fee is
hereby granted, provided that the above copyright notice appear in all copies
and that both that copyright notice and this permission notice appear in sup-
porting documentation, and that the name of M.I.T. not be used in advertis-
ing or publicity pertaining to distribution of the software without specific,
written prior permission. Furthermore if you modify this software you must la-
bel your software as modified software and not distribute it in such a fashion
that it might be confused with the original MIT software.
M.I.T. makes no representations about the suitability of this software for any
purpose. It is provided “as is” without express or implied warranty.

Introduction
C451 x-4
THIS SOFTWARE IS PROVIDED “AS IS” AND WITHOUT ANY EXPRESS OR
IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
PURPOSE.
THIS SOFTWARE IS NOT ORIGINAL MIT SOFTWARE, MODIFIED BY KONI-
CA MINOLTA BUSINESS TECHNOLOGIES, INC.
Mersenne Twister
A C-program for MT19937, with initialization improved 2002/1/26.
Coded by Takuji Nishimura and Makoto Matsumoto.
Before using, initialize the state by using init_genrand(seed) or
init_by_array(init_key, key_length).
Copyright © 1997-2002, Makoto Matsumoto and Takuji Nishimura, All rights
reserved.
Redistribution and use in source and binary forms, with or without modifica-
tion, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright no-
tice, this list of conditions and the following disclaimer in the documen-
tation and/or other materials provided with the distribution.
3. The names of its contributors may not be used to endorse or promote
products derived from this software without specific prior written permis-
sion.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MER-
CHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DIS-
CLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUP-
TION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETH-
ER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
Any feedback is very welcome.
http://www.math.sci.hiroshima-u.ac.jp/~m-mat/MT/emt.html
email: m-mat @ math.sci.hiroshima-u.ac.jp (remove space)

Introduction
C451 x-5
Contents
Introduction
Kerberos ......................................................................................... x-3
Mersenne Twister ........................................................................... x-4
Contents ............................................................................................. x-5
Available features ............................................................................ x-17
Selecting the print color ............................................................... x-17
Automatically selecting the paper ................................................ x-17
Adjusting copies to the size of the paper ..................................... x-17
Specifying separate horizontal and vertical zoom ratios .............. x-17
Scanning the original in separate batches ................................... x-17
Center binding and folding in half and in three ............................ x-18
Sorting copies .............................................................................. x-18
Stapling copies ............................................................................. x-18
Punching holes in copies .............................................................. x-19
Copying multiple original pages onto a single page .................... x-19
Copying an original containing various page sizes ...................... x-19
Adjusting copies according to the image quality of the
original .......................................................................................... x-19
Inserting paper between copies of OHP ...................................... x-20
Adding a cover page .................................................................... x-20
Inserting different paper into copies ............................................. x-20
Inserting pages from a different original at specified locations
in a copy ....................................................................................... x-21
Printing double-sided copies with the specified page on the
front side ....................................................................................... x-21
Copying with reversed colors ....................................................... x-21
Printing a mirror image ................................................................. x-22
Copying with a background color ................................................ x-22
Improving the copy color quality .................................................. x-22
Separately copying a page spread ............................................... x-22
Repeating copy images ................................................................ x-23
Printing the enlarged image on multiple pages ............................ x-23
Creating booklets from copies of pamphlets ............................... x-23
Making copies for filing ................................................................ x-24
Adjusting the image to fit the paper size ...................................... x-24
Copying with the page layout of a magazine ............................... x-24
Erasing sections of copies ........................................................... x-25
Printing a sample copy ................................................................. x-25
Printing date/time or page number on copies .............................. x-25
Managing jobs .............................................................................. x-25
Programming copy settings ......................................................... x-25
Checking the copy settings .......................................................... x-26

Introduction
C451 x-6
Enlarging the size of text in touch panel screens ......................... x-26
Displaying explanations of functions and settings ....................... x-26
Interrupting a copy job ................................................................. x-26
Explanation of manual conventions .............................................. x-27
Descriptions of original documents and paper ............................ x-29
User’s Guides .................................................................................. x-30
Printed manuals ............................................................................ x-30
User’s Guide CD manuals ............................................................ x-30
1 Before making copies
1.1 Part names and their functions ........................................................1-2
Options ........................................................................................... 1-2
Outside of machine ........................................................................1-5
Inside of machine ......................................................................... 1-11
Finisher FS-517/Punch kit PK-512 ............................................... 1-13
Finisher FS-608/Punch kit PK-512 ............................................... 1-15
Finisher FS-519/Output tray OT-602/Punch kit PK-515 .............. 1-18
Saddle stitcher SD-505/Mailbin kit MT-502 .................................1-20
Job separator JS-504 ................................................................... 1-22
Large capacity unit LU-301 .......................................................... 1-23
Control panel ................................................................................ 1-25
Basic settings screens .................................................................. 1-28
Icons that appear in the screen ....................................................1-31
1.2 Adjusting the angle of the control panel .......................................1-32
To adjust the angle of the control panel .......................................1-32
1.3 Turning on the main power and the sub power ...........................1-36
Turning on the machine ................................................................ 1-36
Scanning during warm-up ............................................................ 1-38
Turning off the machine ................................................................ 1-39
Automatically clearing settings (automatic panel reset) ...............1-41
Automatically canceling the mode screen
(System Auto Reset) ..................................................................... 1-41
Automatically conserving energy (Low Power mode) ..................1-41
Automatically conserving energy (Sleep mode) ...........................1-43
Manually conserving energy .........................................................1-43
Automatically turning the machine on/off (Weekly Timer) ............ 1-44
Controlling each user’s use of this machine
(User Authentication) .................................................................... 1-47
Controlling each account’s use of this machine
(Account Track) ............................................................................ 1-51
Controlling use of this machine with authentication unit
(biometric type) ............................................................................. 1-54
When “1-to-many authentication” has been specified .................1-56

Introduction
C451 x-7
When “1-to-1 authentication” has been specified ....................... 1-57
Controlling use of this machine with the authentication unit
(IC card type) ................................................................................ 1-58
When “Card Authentication” has been specified ......................... 1-58
When “Card Authentication + Password” has been specified .....1-60
1.4 Loading paper into tray 1 and tray 2 .............................................1-61
1.5 Loading paper into tray 3 ...............................................................1-65
1.6 Loading paper into tray 4 ...............................................................1-68
1.7 Loading paper into the LCT ...........................................................1-71
1.8 Loading paper into the bypass tray ...............................................1-73
2 Basic copy operations
2.1 General copy operation ....................................................................2-2
2.2 Operations that cannot be combined .............................................2-5
Operations where the setting specified last is given priority ..........2-5
Operations where the setting specified first is given priority .........2-7
2.3 Feeding the document ......................................................................2-8
Loading the document into the ADF .............................................. 2-8
Placing the document on the original glass ................................. 2-11
Scanning the document in separate batches
(“Separate Scan” setting) ............................................................. 2-13
Scanning a multi-page document from the original glass ............ 2-17
2.4 Specifying document settings .......................................................2-23
Specifying the document size (Original Size settings) .................. 2-23
Copying documents of mixed sizes (“Mixed Original” setting) ....2-25
Loading folded (Z-folded) documents .......................................... 2-27
Selecting the document orientation
(Original Direction settings) .......................................................... 2-29
To select an Original Direction setting ..........................................2-31
Selecting the position of the binding margin
(Binding Position settings) ............................................................ 2-32
To select a Binding Position setting .............................................2-34
Reducing the effects of dust on the left partition glass ................ 2-35
Changing scan settings for each document ................................. 2-36
2.5 Selecting a Color setting ................................................................2-41
To select a Color setting ............................................................... 2-42
2.6 Selecting a Paper Setting ...............................................................2-44
Automatically selecting the paper size (“Auto” Paper setting) ..... 2-45
Manually selecting the desired paper size ...................................2-46
2.7 Specifying a Zoom setting ..............................................................2-47
Automatically selecting the zoom ratio (“Auto” Zoom Setting) ....2-47

Introduction
C451 x-8
Specifying the zoom ratio of the document
(“Full Size” setting) ....................................................................... 2-48
Typing in the zoom ratio (XY Zoom setting) .................................2-49
Slightly reducing the copy (“Minimal” setting) .............................. 2-51
Selecting a preset zoom ratio (Enlarge and Reduce settings) ...... 2-52
Typing in separate X and Y zoom ratios
(Individual Zoom settings) ............................................................ 2-53
Selecting a stored zoom ratio ....................................................... 2-55
Storing the desired zoom ratio .....................................................2-56
2.8 Selecting an Original > Copy setting .............................................2-59
Selecting single-sided copies ....................................................... 2-60
Selecting double-sided copies ..................................................... 2-62
2.9 Selecting a combined copy setting ...............................................2-65
Copying multiple document pages onto a single page
(combined copy settings) ............................................................. 2-67
2.10 Selecting the quality of the document ..........................................2-69
Loading documents with small print or photos
(Original Type settings) ................................................................. 2-69
To select an Original Type setting ................................................ 2-70
2.11 Selecting the Density settings .......................................................2-73
Adjusting the print density (Density settings) ...............................2-73
Adjusting the background density
(Background Removal settings) ................................................... 2-75
Adjusting the reproduction quality of text .................................... 2-76
Printing with a glossy finish (“Glossy” setting) ............................. 2-78
2.12 Selecting Finishing settings ...........................................................2-79
Separating copies by sets (“Sort” setting) .................................... 2-84
Separating copies by pages (“Group” Setting) ............................ 2-85
Selecting the output tray ..............................................................2-86
Stapling copies (Staple settings) .................................................. 2-88
Punching holes in copies (Punch settings) ................................... 2-93
2.13 Selecting a folding setting ..............................................................2-96
Folding copies in half (“Half-Fold” setting) ................................... 2-97
Binding copies at the center (“Center Staple & Fold” setting) ... 2-100
To fold copies in three (“Tri-Fold” setting) .................................. 2-104
2.14 Selecting not to rotate the image ................................................2-106
2.15 Scanning the next document to be copied while a copy job
is being printed (next job reservation) ........................................2-107
2.16 Temporarily stopping scanning/printing .....................................2-109
2.17 Deleting a paused job ...................................................................2-110

Introduction
C451 x-9
3 Additional copy operations
3.1 Checking the Copy Settings (Check Job) .......................................3-2
To check the settings .....................................................................3-2
To change the settings ...................................................................3-5
3.2 Printing a proof to check the settings (Proof Copy) ......................3-6
3.3 Checking the print image as a preview image
(Advanced Preview) ........................................................................3-10
Preview screen ............................................................................. 3-10
Zoom ............................................................................................ 3-11
Page Rotation ............................................................................... 3-12
View Finishing ............................................................................... 3-13
Change Setting ............................................................................. 3-13
Checking the advanced preview .................................................. 3-14
3.4 Interrupting a copy job (Interrupt mode) .......................................3-17
3.5 Registering copy programs (Mode Memory) ................................3-19
Deleting a copy program ..............................................................3-22
3.6 Copying with programmed copy settings (Mode Memory) .........3-24
3.7 Displaying function descriptions (Help) ........................................3-27
Overview of Help screens ............................................................. 3-27
Displaying main Help screens ......................................................3-31
3.8 Specifying control panel settings (Accessibility mode) ...............3-33
Displaying the Accessibility Setting screen .................................. 3-33
Setting the “Touch Panel Adjustment” function ...........................3-33
Setting the Key Repeat Start/Interval Time functions .................. 3-35
Setting the “System Auto Reset Confirmation” function .............. 3-37
Setting the “Auto Reset Confirmation” function ........................... 3-40
Setting the “Enlarge Display Mode Confirmation” function ......... 3-42
Setting the “Message Display Time” function .............................. 3-44
Setting the “Sound Setting” functions .........................................3-46
4 Troubleshooting
4.1 When an error code appears ...........................................................4-2
4.2 When the message “Misfeed detected.” appears .........................4-4
Location of paper misfeed ..............................................................4-4
Paper misfeed indications .............................................................. 4-5
Clearing a paper misfeed in the ADF (feed section) .......................4-7
Clearing a paper misfeed in the ADF (transport section) ..............4-12
Clearing a paper misfeed in the ADF (scanning section) .............. 4-17
Clearing a paper misfeed in the ADF (output section) .................. 4-22
Clearing a paper misfeed in the ADF (turnover section) ............... 4-25
Clearing a paper misfeed in the fusing unit ..................................4-28

Introduction
C451 x-10
Clearing a paper misfeed in the main unit .................................... 4-33
Clearing a paper misfeed in the automatic duplex unit ................ 4-38
Clearing a paper misfeed in the bypass tray ................................4-40
Clearing a paper misfeed in the paper transport section .............4-42
Clearing a paper misfeed in tray 1 ................................................4-45
Clearing a paper misfeed in tray 2 ................................................4-46
Clearing a paper misfeed in tray 3 ................................................4-48
Clearing a paper misfeed in tray 4 ................................................4-50
Clearing a paper misfeed in the tray 3/4 horizontal transport
unit ................................................................................................ 4-52
Clearing a paper misfeed in the LCT ............................................4-54
Clearing a banner paper misfeed .................................................4-57
Clearing a paper misfeed in Finisher FS-517 ...............................4-63
Clearing a paper misfeed in Finisher FS-608 ...............................4-70
Clearing a paper misfeed in Finisher FS-519 ...............................4-79
Clearing a paper misfeed in the mailbin .......................................4-84
Clearing a paper misfeed in the saddle stitcher ...........................4-87
Clearing a paper misfeed in the separator ...................................4-89
4.3 When the message “Unable to staple.” appears .........................4-91
Clearing jammed staples in Finisher FS-517 ................................4-91
Clearing jammed staples in Finisher FS-608 ................................4-96
Clearing jammed staples in Finisher FS-519 ..............................4-101
Clearing jammed staples in the saddle stitcher .........................4-103
4.4 When the message “Replenish paper.” appears .......................4-106
4.5 When the message “... due to insufficient memory.”
appears ..........................................................................................4-107
4.6 When the message “Please replace following unit(s).”
appears ..........................................................................................4-108
4.7 When the message “XXXX needs to be replaced.” appears .....4-110
4.8 When the message “Now remote operating. Please do not
turn off the power.” appears ........................................................4-111
4.9 Simple troubleshooting ................................................................4-112
4.10 Main messages and their remedies ............................................4-116
5 Specifications
5.1 Specifications ....................................................................................5-2
Main unit ......................................................................................... 5-2
Automatic duplex unit ..................................................................... 5-4
Automatic document feeder ........................................................... 5-5
Large capacity unit LU-301 ............................................................ 5-6
Finisher FS-517 .............................................................................. 5-6
Finisher FS-608 .............................................................................. 5-7
Punch kit PK-512 ............................................................................ 5-9

Introduction
C451 x-11
Finisher FS-519 .............................................................................. 5-9
Punch kit PK-515 ..........................................................................5-10
Saddle stitcher SD-505 ................................................................ 5-10
Output tray OT-602 ......................................................................5-11
Mailbin kit MT-502 ........................................................................5-11
Job separator JS-504 ................................................................... 5-11
6 Copy paper/original documents
6.1 Copy paper ........................................................................................6-2
Possible paper sizes ....................................................................... 6-2
Paper types and paper capacities ..................................................6-4
Special paper .................................................................................. 6-5
Precautions for paper .....................................................................6-7
Paper storage ................................................................................. 6-7
Auto tray switch feature .................................................................. 6-8
Order for selecting paper trays .......................................................6-8
6.2 Selecting the Paper settings ............................................................6-9
Automatically detecting the paper size (“Auto Detect” setting) .....6-9
Selecting a paper size setting (Size Setting) ................................ 6-11
Specifying a non-standard paper size (Custom Size settings) ..... 6-13
Storing a non-standard paper size (Custom Size settings) ..........6-15
Selecting a setting for oversized paper (Wide Paper settings) .....6-18
Specifying a setting for special paper ..........................................6-21
Printing double-sided copies manually ........................................ 6-23
6.3 Original documents .........................................................................6-26
Documents that can be loaded into the ADF ...............................6-26
Precautions for loading documents into the ADF ........................ 6-28
Documents that can be placed on the original glass ...................6-28
Precautions for positioning documents on the original glass ...... 6-29
7 Application functions
7.1 Color Adjust parameters and samples ...........................................7-2
General information about color .....................................................7-4
“Red” parameter ............................................................................. 7-6
“Green” parameter ......................................................................... 7-7
“Blue” parameter ............................................................................ 7-8
“Color Balance” parameter (CMYK color adjustment) ...................7-9
“Brightness” parameter ................................................................ 7-11
“Contrast” parameter ................................................................... 7-12
“Saturation” parameter ................................................................. 7-13
“Sharpness” parameter ................................................................ 7-14
“Hue” parameter ........................................................................... 7-15
“Copy Density” parameter ............................................................ 7-16

Introduction
C451 x-12
“Single Color” function ................................................................. 7-17
“2 Color” function ......................................................................... 7-18
“Background Color” function ....................................................... 7-19
“Neg-/Pos. Reverse” function ...................................................... 7-20
“Mirror Image” function ................................................................ 7-21
7.2 Inserting paper between OHP transparencies
(“OHP Interleave” function) ............................................................7-22
7.3 Adding cover pages (“Cover Sheet” function) ..............................7-25
7.4 Inserting different paper into copies (“Insert Sheet” function) ... 7-28
7.5 Inserting copies of a different document for a specified page
(“Insert Image” function) ................................................................7-33
7.6 Specifying pages to be printed on the front side
(“Chapters” function) ......................................................................7-37
7.7 Scanning documents with different settings and printing
copies all together (“Program Jobs” function) .............................7-41
7.8 Copying with image colors inversed
(“Neg./Pos. Reverse” function) ......................................................7-47
7.9 Copying in a mirror image (“Mirror Image” function) ..................7-49
7.10 Adding a background color to copies
(“Background Color” function) ......................................................7-53
7.11 Adjusting the copy color quality (Color Adjust parameters) .......7-56
To adjust the Color Adjust parameters .........................................7-57
Checking the print result of the Color Adjust settings
(Sample Copy) .............................................................................. 7-59
7.12 Producing separate copies of each page in a page spread
(“Book Copy” function) ...................................................................7-61
7.13 Tiling copy images (“Image Repeat” function) .............................7-67
7.14 Copying an enlarged image on multiple pages
(“Poster Mode” function) ................................................................7-73
7.15 Copying booklets (“Booklet Original” function) ...........................7-78
7.16 Adding a binding margin to copies (“Page Margin” function) ....7-82
7.17 Adjusting the image to fit the paper (Image Adjust settings) ..... 7-86
7.18 Copying with the page layout of a booklet
(“Booklet” function) ........................................................................7-90
7.19 Erasing specified areas of copies (“Frame Erase” function) ...... 7-92
7.20 Printing the date/time or page number on copies (Stamp/
Composition functions) ..................................................................7-94
Printing the date/time (“Date/Time” function) ...............................7-95
Printing the page number (“Page Number” function) ...................7-99
Printing previously registered stamps (“Stamp” function) .......... 7-104

Introduction
C451 x-13
Printing copy protection text (“Copy Protect” function) .............7-108
Printing repeating stamps (“Stamp Repeat” function) ...............7-117
Printing the image scanned first overlapped by the remaining
document pages (“Overlay” function) ........................................7-125
Saving a scanned image as a registered overlay
(“Overlay” function) ..................................................................... 7-129
Using a registered overlay (“Overlay” function) .......................... 7-132
Printing a header/footer (“Header/Footer” function) .................. 7-133
7.21 Saving the scanned document in a user box
(“Save in User Box” function) .......................................................7-135
8 Replacing toner cartridges and staple cartridges and
emptying punch scrap box
8.1 Replacing the toner cartridge ..........................................................8-2
To replace the toner cartridge ........................................................ 8-6
8.2 Replacing the waste toner box ......................................................8-10
To replace the waste toner box .................................................... 8-12
8.3 Replacing an imaging unit ..............................................................8-16
To replace the imaging unit (black) ..............................................8-18
To replace the imaging unit (yellow, magenta and cyan) .............8-27
8.4 Replacing the staple cartridge .......................................................8-36
To replace the staple cartridge in Finisher FS-517 ...................... 8-37
To replace the staple cartridge in Finisher FS-608 ...................... 8-42
To replace the staple cartridge in Finisher FS-519 ...................... 8-47
To replace the staple cartridge in saddle stitcher ........................ 8-50
8.5 Emptying the punch scrap box ......................................................8-54
To empty the punch scrap box in Finisher FS-517/FS-608 .........8-57
To empty the punch scrap box in Finisher FS-519 ...................... 8-59
9 Care of the machine
9.1 Cleaning .............................................................................................9-2
Housing .......................................................................................... 9-2
Original glass .................................................................................. 9-3
Left partition glass ..........................................................................9-3
Control panel .................................................................................. 9-4
Document pad ................................................................................ 9-4
Paper take-up rollers ...................................................................... 9-5
Electrostatic charger wire ............................................................... 9-6
Print head ....................................................................................... 9-6
9.2 Viewing counters (Meter Count) ......................................................9-8
Viewing counters ............................................................................ 9-8

Introduction
C451 x-14
Viewing the coverage rate ..............................................................9-9
9.3 When the message “It is time for the scheduled inspection of
the device.” appears .......................................................................9-11
10 Managing jobs
10.1 Overview of Job List screen ...........................................................10-2
Jobs .............................................................................................. 10-2
Multi-job feature ........................................................................... 10-2
Job List screens ........................................................................... 10-3
Left panel Job List ........................................................................ 10-7
10.2 Performing operations on jobs ......................................................10-9
Deleting a job ................................................................................ 10-9
Checking job settings ................................................................. 10-10
Checking job details ................................................................... 10-11
Displaying the Current Jobs list (stored jobs and active jobs) ... 10-13
Displaying the Job History list ....................................................10-14
Printing a proof copy of a stored job .......................................... 10-15
Printing a stored job ................................................................... 10-17
Increasing printing priority .......................................................... 10-18
11 Utility mode
11.1 Overview of Utility mode parameters ............................................11-2
List of registration information and parameters ........................... 11-2
11.2 Registering a destination ...............................................................11-9
Create One-Touch Destination ..................................................... 11-9
Create User Box ........................................................................... 11-9
Limiting Access to Destinations ................................................. 11-10
Access Level ............................................................................... 11-10
Level settings .............................................................................. 11-10
Group .......................................................................................... 11-11
Specifying a group setting ..........................................................11-11
Specifying a destination level ..................................................... 11-13
Specifying a user level ................................................................ 11-15
Displaying the destination registration screen ........................... 11-18
11.3 Specifying user settings ...............................................................11-20
System Settings ......................................................................... 11-20
Custom Display Settings ............................................................11-24
Copier Settings ........................................................................... 11-26
Scan/Fax Settings ...................................................................... 11-29
Printer Settings ........................................................................... 11-29
Change Password ...................................................................... 11-30
Change E-Mail Address .............................................................. 11-30
Change Icon ............................................................................... 11-30

Introduction
C451 x-15
Displaying the User Settings screen .......................................... 11-30
11.4 Specifying administrator settings ................................................11-32
System Settings ......................................................................... 11-32
Administrator/Machine Settings ................................................. 11-42
One-Touch/User Box Registration ............................................. 11-42
User Authentication/Account Track ........................................... 11-43
Network Settings ........................................................................ 11-48
Copier Setting ............................................................................. 11-49
Printer Settings ........................................................................... 11-50
Fax Settings ................................................................................ 11-50
System Connection .................................................................... 11-50
Security Settings ........................................................................ 11-51
License Settings ......................................................................... 11-55
Displaying the Administrator Settings screen ............................11-56
11.5 Check Consumable Life ...............................................................11-59
Displaying the Check Consumable Life screen .......................... 11-59
11.6 Overview of weekly timer settings ..............................................11-61
11.7 Printer Adjustment ........................................................................11-62
Leading Edge Adjustment .......................................................... 11-62
Centering .................................................................................... 11-64
Leading Edge Adjustment (Duplex Side 2) .................................11-66
Centering (Duplex 2nd Side) ....................................................... 11-68
Adjusting printing according to the media ................................. 11-70
11.8 Finisher Adjustment ......................................................................11-72
2-Position Staple Pitch Adjustment ............................................ 11-72
Center Staple Position ................................................................ 11-73
Half-Fold Position ....................................................................... 11-77
Tri-Fold Position Adjustment ...................................................... 11-80
Punch Vertical Position Adjustment ........................................... 11-82
Punch Horizontal Position Adjustment ....................................... 11-84
Punch Regist Loop Size Adjustment .......................................... 11-88
Punch Edge Sensor Adjustment ................................................11-90
11.9 Color Registration Adjust .............................................................11-92
Adjusting the color registration for yellow, magenta and
cyan ............................................................................................ 11-92
11.10 Gradation Adjustment ...................................................................11-96
11.11 Header/Footer Settings ................................................................11-99
Specifying headers/footers ........................................................ 11-99
Editing headers/footers ............................................................ 11-102
11.12 Authentication Method ...............................................................11-103
User authentication and account track .................................... 11-103

Introduction
C451 x-16
When user authentication and account track are
synchronized ............................................................................ 11-104
When user authentication and account track are used
separately ................................................................................. 11-105
Selecting an authentication method ......................................... 11-106
11.13 User Authentication Setting .......................................................11-111
Administrative Settings—List ................................................... 11-111
Default Function Permission ..................................................... 11-112
Public User Access .................................................................. 11-113
User Registration ...................................................................... 11-114
User Counter ............................................................................ 11-119
Viewing user counters .............................................................. 11-121
11.14 Account Track Setting ................................................................11-123
Account Track Registration ...................................................... 11-123
Account Track Counter ............................................................ 11-127
Viewing account counters ........................................................ 11-128
11.15 Password Rules ...........................................................................11-130
Conditions of the password rules ............................................. 11-130
11.16 Enhanced Security Mode ...........................................................11-132
12 Appendix
12.1 Entering text ....................................................................................12-2
Enlarging the keyboard ................................................................. 12-4
To type text ................................................................................... 12-5
List of Available Characters ..........................................................12-5
12.2 Glossary ...........................................................................................12-6
13 Index
13.1 Index .................................................................................................13-2

Introduction
C451 x-17
Available features
Selecting the print color
The color used to print copies can be specified, for example, the copy can
be printed in full color or in black and white.
For details, refer to “Selecting a Color setting” on page 2-41.
Automatically selecting the paper
The most appropriate paper size can automatically be selected based on the
size of the loaded original and the specified zoom ratio.
For details, refer to “Automatically selecting the paper size (“Auto” Paper set-
ting)” on page 2-45.
Adjusting copies to the size of the paper
The most appropriate zoom ratio can automatically be selected based on the
size of the loaded original and the specified paper size.
For details, refer to “Automatically selecting the zoom ratio (“Auto” Zoom
Setting)” on page 2-47.
Specifying separate horizontal and vertical zoom ratios
By specifying separate horizontal and vertical zoom ratios, copies of the orig-
inal can be resized as desired.
For details, refer to “Typing in separate X and Y zoom ratios (Individual Zoom
settings)” on page 2-53.
Scanning the original in separate batches
An original with a large number of pages can be divided and scanned in sep-
arate batches. Double-sided copies can be produced by using the original
glass or the original pages can be alternately loaded onto the original glass
or into the ADF, and then all pages can be copied together as a single job.
For details, refer to “Scanning the document in separate batches (“Separate
Scan” setting)” on page 2-13 and “Scanning a multi-page document from
the original glass” on page 2-17.
ABC
ABC
ABC

Introduction
C451 x-18
Center binding and folding in half and in three
Copies can be folded at their center (“Half-Fold” setting) or bound with sta-
ples after being folded in half (“Center Staple & Fold” setting). Otherwise, the
copies can be folded in three (“Tri-fold” setting).
For details, refer to “Selecting a folding setting” on page 2-96.
Sorting copies
The finishing method for copies can be selected.
For details, refer to “Separating copies by sets (“Sort” setting)” on
page 2-84, “Separating copies by pages (“Group” Setting)” on page 2-85.
Stapling copies
Multi-page originals can be copied and stapled together.
For details, refer to “Stapling copies (Staple settings)” on page 2-88.
ABC
ABC ABC
ABC ABC

Introduction
C451 x-19
Punching holes in copies
Holes for filing can be punched in the copies.
For details, refer to “Punching holes in copies (Punch settings)” on
page 2-93.
Copying multiple original pages onto a single page
Multiple pages of the original can be printed together on a single page.
For details, refer to “Copying multiple document pages onto a single page
(combined copy settings)” on page 2-67.
Copying an original containing various page sizes
An original with various page sizes can be scanned and copied together.
For details, refer to “Copying documents of mixed sizes (“Mixed Original”
setting)” on page 2-25.
Adjusting copies according to the image quality of the original
The copies can be adjusted according to the image quality of the original.
For details, refer to “Loading documents with small print or photos (Original
Type settings)” on page 2-69 or “Adjusting the print density (Density set-
tings)” on page 2-73.
ABC
ABC DEF ABC DEF
ABCABC