Konica Minolta CM3600D User manual

Personal Computer
Unit Driver
CM-A108
Accessory Case
CM-A109
Dust Cover
CM-A110
Spectrophotometer CM-3600d
Standard accessories Optional accessories
Target Mask
CM-A105
( 25.4mm)
AC Adapter AC-A12
AC Adapter AC-A21 (for Korea)
RS-232C Cable IF-A12
(for IBM PC)
White Calibration Plate CM-A103
(with floppy disk containing calibration data)
Target Mask
CM-A106
( 8mm)
Target Mask
CM-A107
( 4mm)
Cell
CM-A99
(20mm)
Cell
CM-A98
(10mm)
Cell
CM-A97
(2mm)
Plastic Cell
CM-A132
(20mm; set for 100)
Plastic Cell
CM-A131
(10mm; set for 100)
Plastic Cell
CM-A130
(2mm; set for 100)
Transmittance.
Zero Calibration Plate
CM-A100
Transmittance
Specimen Holder
CM-A96
Zero Calibration Box
CM-A104
RS-232C Cables
IF-A13 to IF-A15
Color Tiles
SpectraMagicTM NX
CM-S100w
System
Diagram
Specifications
Network construction for color control either within
an organization or between organizations
Built for Precision,
Priced for Economy
In-house color control
Color control between companies
R&D
Design Production
Company
A
Company
B
KONICA MINOLTA SPECTROPHOTOMETER LINEUP
CM-3700d series
CM-3600d
CM-3500d
CM-2600d/2500d/2500c
"State of the Art" Reference models
Laboratory and Production modell
Unique Top Port bench-top model
Top class accuracy portables
CM-3500d
CM-3700d
CM-2000/2600d/2500c
series 2500d
CM-3600d
High inter-instrument agreement between the same Konica Minolta
model and also among all CM models (benchtops and portables):
CM-2000 series, CM-3000 series,
This inter-instrument agreement is ideal when multiple units will be
used for color control either within an organization or between
organizations.
Standard accessories
Size (W x H x D)/weight
Storage temperature/
humidity range
Operating temperature/
humidity range (*1)
Power
Interface
Transmittance
chamber
UV cut filter
UV adjustment
Temperature
dependence
Inter instrument
agreement
Repeatability
Measurement/
illumination area
Minimum interval
between measurements
Measurement time
Light source
Sphere size
Reflectance range
HaIf bandwidth
Wavelength pitch
Wavelength range
Illumination/
observation system
Light-receiving element
Spectral separation device
White Calibration Plate,Target Mask (ø4mm) ,Target Mask (ø8mm) ,Target Mask (ø25.4mm) , Zero
Calibration box, AC adapter, Dust Cover, Accessory Case, Unit Driver, RS-232C Cable (9-pin,2m)
Options SpectraMagic
TM
NX(software) ,Transmittance Specimen Holder, Cell (2mm) / (10mm) / (20mm),
Transmittance Zero Calibration Plate, RS-232C Cable (IBM,PC/AT 5m) / (IBM,PS/2 2m) / (IBM,PS/2 5m)
244 x 208 x 378 mm(9-5/8 x 8-3/16 x 14-7/8 inch),12 kg(26-7/16 lb.)
0 to 40°C, relative humidity 80% or less (at 33°C) with no condensation
13 to 33°C, relative humidity 80% or less (at 33°C) with no condensation
AC120V/230V 50/60Hz (Using included AC adapter)
RS-232C, D-SUB 9-pin (female) terminal
Width: 133mm; depth: approx. 50mm; measurement dia.: approx. 17mm
Transmission sample holder (Optional accessory): Sample holder;
for both plate-shaped and liquid samples (removable)
400nm cutoff and 420nm cutoff
Instantaneous numerical adjustment
Spectral reflectance: Within ±0.10%/°C
Color difference: Within ∆E*ab 0.05/°C
Mean ∆E*ab0.15 (LAV/SCI) Average for 12 BCRA Series II color tiles
compared to values measured with master body.
Spectral reflectance: Standard deviation within 0.1%
Colorimetric values: Standard deviation within ∆E*ab0.02
LAV : ø25.4mm/ø30mm
MAV: ø8mm/ø11mm (Selectable)
SAV : ø4mm/ø7mm
Approx. 4 seconds;when SCI/SCE measured
Approx. 1.5 seconds
Pulsed xenon lamps ( X 4)
ø152mm
0 to 200%; resolution: 0.01%
Approx.10nm
10nm
360 to 740nm
Reflectance;d/8 (diffused illumination, 8-degree viewing), equipped with
simultaneous measurement of SCI (specular component included) / SCE (specular
component excluded) Conforms to CIE No.15,lSO7724/1,ASTME1164, DIN5033 Teil7
and JIS Z8722 condition C standard. Transmittance : d/0 (diffused illumination, 0-
degree viewing) Conforms to CIE No.15, ASTME1164 and DIN5033 Teil7 standard.
Silicon photodiode array (dual 40 elements)
Diffraction grating
The result:
nA highly accurate, reliable, rugged spectrophotometer.
nVersatile enough for all colorimetric applications.
nSimplified operation.
And
nLOW PRICE
KONICA MINOLTA Innovative Optical System "World first" technology :
nNumerical Gloss Control measurement within a few seconds.
nNumerical UV Control for calibration and measurements.
nSoft-flash mode to avoid triplet adsorption in fluorescent materials.
New Enhanced Performance Technology teams patented performance features
with simplified design and advanced cost-reducing manufacturing techniques.
Technology
*1 Operating temperature/humidity range of products for North America : 13 to 33°C, relative humidity 80% or less (at 31°C) with no condensation
Mac OS 10.3.7J illustrator 10J
CM-3600d_outside.ai 2006.11.21
SAFETY PRECAUTIONS
A
G
M
F
P
K
Printed in Japan9242-4868-11
©1998 KONICA MINOLTA SENSING, INC.
15
For correct use and for your safety, be sure to read
the instruction manual before using the instrument.
Always connect the instrument to the
specified power supply voltage.
Improper connection may cause a fire
or electric shock. Certificate No : JQA-E-80027
Registration Date : March 12, 1997
Certificate No : YKA 0937154
Registration Date : March 3, 1995

UV-adjusted data
ON
POWER
OFF
244
54 89
35 378
208
17
Performance
Fast, simultaneous measurement of Specular Included and Specular
Excluded components (SCI/SCE)
Versatility
Full wavelength range 360-740nm with 10nm pitch
Reliability
The Innovative CM-3600d Spectrophotometer Brings You
Highest Quality Levels in Color Measurement
along with Unsurpassed Versatility, User Comfort and Low Cost!
High reliability design with fewest moving parts of any benchtop
spectrophotometer
Large (6") sphere; d/8°geometry
Reflectance and transmittance sample measurements
Changeable measurement areas (ø4mm,ø8mm,or ø25.4mm)
View finder design for easy sample viewing
Compact and lightweight
Fast, Instantaneous numerical UV adjustment enables UV-included,
UV-excluded, and UV-adjusted data to be obtained simultaneously
Precise inter-instrument agreement.
All CM-3600d's meet published inter-instrument agreement.
The CM-3600d is equipped with maintenance-free technology and solid
state components to withstand rugged conditions.
The monolith polychromator unit assures highest durability and stability.
With one exception (Observing Lens), the CM-3600d does not use any
moving parts. Furthermore, each CM-3600d passes a hard endurance
test program to comply with KONICA MlNOLTA's highest quality standards
in accordance with ISO-9001.
Compact but yet Powerful
Behind the compact and space-
saving design, you'll find the
skills of a top-class
instrument with 6"
large sphere and
other functions so
far only found in
much larger and
more expensive
instruments.
Full range of application coverage
For high-accuracy color control
The newly designed Monolith Polychromator Unit
Maintenance free technology
and ruggedness concept
LAV
25.4mm
MAV
8mm
SAV
4mm
Konica Minolta's Innovative Optical System,
including Numerical Gloss Control and Numerical
UV Control, opens the way to unlimited application
versatility at a price level never seen before.
Whatever your sample looks like, with the CM-3600d you can measure it!
Reflectance of opaque samples, Transmittance of transparent liquids or solids
and Diffuse Transmittance of translucent materials such as plastics - the
CM-3600d is truly versatile.
Transmittance Measurement-The CM-3600d employs
the d/0°geometry (diffused lighting, 0°viewing), which
conforms to ISO, DIN, CIE, and ASTM standards.
Reflectance Measurement-The
CM-3600d employs d/8°geometry
(diffused lighting, 8°from normal
viewing) which conforms to JlS,
ISO, DIN, CIE and ASTM
standards.
consists of a diffraction grating with a full wavelength range,
360-740 nm, at 10nm pitch, and 10nm half-band width, both for
sample and reference light, and dual-channel sensor array.
The retro mirror's reflected and illuminated
sample viewing screen minimizes fatigue and
allows trouble-free sample observation.
The compact and space-saving body as well as
all functions of the CM-3600d have been
designed to ensure easy and fatigue-free
operation in daily use. The bright mirror sample
viewing system, the sample holder for up to A4
size samples with full 90°lock down, and the
versatile Transmittance chamber for liquid or
translucent samples are all just where you expect
them to be for easy operation.
1.Numerical Gloss Control
Enhanced Performance Technology
Konica Minolta Innovative Optical System
2.Numerical UV Control
SCI ………specular component included
SCE……… specular component excluded
The CM-3600d is equipped with Minolta Innovative Optical System technology.
For users, this means high accuracy and repeatability, improved performance,
additional features, simple operation, and - low, affordable pricing.
Instead of using a mechanically driven gloss trap,
the CM-3600d is equipped with a patented
numerical Gloss (SCl/SCE) control system.
By sequentially firing two flashes, within a few
seconds the system provides both SCI and SCE
values for each sample.
To replace the time-consuming traditional UV
measurement system that utilizes moving filters,
the CM-3600d introduces yet another patented
numerical calculation system, never seen before:
The measured values of two sequentially fired
flashes, one with full UV energy and one with UV
cut-off filter at either 400 or 420 nm are combined
to obtain the spectral characteristics, and the
respective whiteness and tint value of any UV-
activated fluorescence sample. To avoid triplet
effect on FWA treated samples, the CM-3600d
can be set to Soft-Flash mode. Numerical UV
Control technology makes faster, more effective
and reliable measurements of FWA treated
materials such as textiles, papers and detergents.
This technology also provides:
Konica Minolta Innovative
Optical System Technology
Designed to meet your highest
ergonomic expectations
To cover all kinds of samples, the CM-3600d
gives you the choice among three aperture
sizes: LAV 25.4mm, MAV 8mm and SAV 4mm
with precise measurement spot adjustment by
a motorized observing lens.
Multiple measurement
area selection
Bright and clear
sample viewing system
Dimensions
(Units:mm)
SpectraMagicTM NX enables you to perform comprehensive color
inspection and analysis of incoming raw materials, in process
production, and outbound color critical goods and materials in
virtually any industry. With SpectraMagicTM NX you can insert
digital images with measured data. Measure samples in any of 8
universally accepted color spaces. Select from 15 illuminants, and
up to 40 indices to determine specific color and appearance
properties, such as strength, brightness, haze, yellowness, opacity
and strength. You can even configure up to 3 customized color
equations. Reports range from simple Pass/Fail to trend charts,
histograms, color plots, and spectral graphs. SpectraMagicTM NX
comes with predefined templates using skin technology, or you can
create your own templates. For illustrations and explanations to
understanding color and color measurement technology, there is a
link to Konica Minolta's well known and respected “Precise Color
Communication”. Step by step navigation help. SpectraMagicTM NX
conforms to FDA 21 CFR Part 11 assuring integrity and reliability of
data records.
• Windows®is a trademark of Microsoft Corporation in the USA and
other countries.
Supports Windows®2000/XP
SpectraMagicTM NX (Optional)
Mac OS 10.3.7Jillustrator 10J
CM-3600d_inside.ai2006.11.21

Personal Computer
Unit Driver
CM-A108
Accessory Case
CM-A109
Dust Cover
CM-A110
Spectrophotometer CM-3600d
Standard accessories Optional accessories
Target Mask
CM-A105
( 25.4mm)
AC Adapter AC-A12
AC Adapter AC-A21 (for Korea)
RS-232C Cable IF-A12
(for IBM PC)
White Calibration Plate CM-A103
(with floppy disk containing calibration data)
Target Mask
CM-A106
( 8mm)
Target Mask
CM-A107
( 4mm)
Cell
CM-A99
(20mm)
Cell
CM-A98
(10mm)
Cell
CM-A97
(2mm)
Plastic Cell
CM-A132
(20mm; set for 100)
Plastic Cell
CM-A131
(10mm; set for 100)
Plastic Cell
CM-A130
(2mm; set for 100)
Transmittance.
Zero Calibration Plate
CM-A100
Transmittance
Specimen Holder
CM-A96
Zero Calibration Box
CM-A104
RS-232C Cables
IF-A13 to IF-A15
Color Tiles
SpectraMagicTM NX
CM-S100w
System
Diagram
Specifications
Network construction for color control either within
an organization or between organizations
Built for Precision,
Priced for Economy
In-house color control
Color control between companies
R&D
Design Production
Company
A
Company
B
KONICA MINOLTA SPECTROPHOTOMETER LINEUP
CM-3700d series
CM-3600d
CM-3500d
CM-2600d/2500d/2500c
"State of the Art" Reference models
Laboratory and Production modell
Unique Top Port bench-top model
Top class accuracy portables
CM-3500d
CM-3700d
CM-2000/2600d/2500c
series 2500d
CM-3600d
High inter-instrument agreement between the same Konica Minolta
model and also among all CM models (benchtops and portables):
CM-2000 series, CM-3000 series,
This inter-instrument agreement is ideal when multiple units will be
used for color control either within an organization or between
organizations.
Standard accessories
Size (W x H x D)/weight
Storage temperature/
humidity range
Operating temperature/
humidity range (*1)
Power
Interface
Transmittance
chamber
UV cut filter
UV adjustment
Temperature
dependence
Inter instrument
agreement
Repeatability
Measurement/
illumination area
Minimum interval
between measurements
Measurement time
Light source
Sphere size
Reflectance range
HaIf bandwidth
Wavelength pitch
Wavelength range
Illumination/
observation system
Light-receiving element
Spectral separation device
White Calibration Plate,Target Mask (ø4mm) ,Target Mask (ø8mm) ,Target Mask (ø25.4mm) , Zero
Calibration box, AC adapter, Dust Cover, Accessory Case, Unit Driver, RS-232C Cable (9-pin,2m)
Options SpectraMagic
TM
NX(software) ,Transmittance Specimen Holder, Cell (2mm) / (10mm) / (20mm),
Transmittance Zero Calibration Plate, RS-232C Cable (IBM,PC/AT 5m) / (IBM,PS/2 2m) / (IBM,PS/2 5m)
244 x 208 x 378 mm(9-5/8 x 8-3/16 x 14-7/8 inch),12 kg(26-7/16 lb.)
0 to 40°C, relative humidity 80% or less (at 33°C) with no condensation
13 to 33°C, relative humidity 80% or less (at 33°C) with no condensation
AC120V/230V 50/60Hz (Using included AC adapter)
RS-232C, D-SUB 9-pin (female) terminal
Width: 133mm; depth: approx. 50mm; measurement dia.: approx. 17mm
Transmission sample holder (Optional accessory): Sample holder;
for both plate-shaped and liquid samples (removable)
400nm cutoff and 420nm cutoff
Instantaneous numerical adjustment
Spectral reflectance: Within ±0.10%/°C
Color difference: Within ∆E*ab 0.05/°C
Mean ∆E*ab0.15 (LAV/SCI) Average for 12 BCRA Series II color tiles
compared to values measured with master body.
Spectral reflectance: Standard deviation within 0.1%
Colorimetric values: Standard deviation within ∆E*ab0.02
LAV : ø25.4mm/ø30mm
MAV: ø8mm/ø11mm (Selectable)
SAV : ø4mm/ø7mm
Approx. 4 seconds;when SCI/SCE measured
Approx. 1.5 seconds
Pulsed xenon lamps ( X 4)
ø152mm
0 to 200%; resolution: 0.01%
Approx.10nm
10nm
360 to 740nm
Reflectance;d/8 (diffused illumination, 8-degree viewing), equipped with
simultaneous measurement of SCI (specular component included) / SCE (specular
component excluded) Conforms to CIE No.15,lSO7724/1,ASTME1164, DIN5033 Teil7
and JIS Z8722 condition C standard. Transmittance : d/0 (diffused illumination, 0-
degree viewing) Conforms to CIE No.15, ASTME1164 and DIN5033 Teil7 standard.
Silicon photodiode array (dual 40 elements)
Diffraction grating
The result:
nA highly accurate, reliable, rugged spectrophotometer.
nVersatile enough for all colorimetric applications.
nSimplified operation.
And
nLOW PRICE
KONICA MINOLTA Innovative Optical System "World first" technology :
nNumerical Gloss Control measurement within a few seconds.
nNumerical UV Control for calibration and measurements.
nSoft-flash mode to avoid triplet adsorption in fluorescent materials.
New Enhanced Performance Technology teams patented performance features
with simplified design and advanced cost-reducing manufacturing techniques.
Technology
*1 Operating temperature/humidity range of products for North America : 13 to 33°C, relative humidity 80% or less (at 31°C) with no condensation
Mac OS 10.3.7J illustrator 10J
CM-3600d_outside.ai 2006.11.21
SAFETY PRECAUTIONS
A
G
M
F
P
K
Printed in Japan9242-4868-11
©1998 KONICA MINOLTA SENSING, INC.
15
For correct use and for your safety, be sure to read
the instruction manual before using the instrument.
Always connect the instrument to the
specified power supply voltage.
Improper connection may cause a fire
or electric shock. Certificate No : JQA-E-80027
Registration Date : March 12, 1997
Certificate No : YKA 0937154
Registration Date : March 3, 1995