Kontron MUNGO560 User manual

www.kontron.com
MUNGO560
User’s Guide
Manual PN: 930-0029-00-C
January 2007

Customer Service
Mailing Address: Kontron - United States
14118 Stowe Drive
Poway, CA 92064 USA
Tel: [phone]
Fax: [phone]
Technical Support: U.S. and Canadian Customers - 24 hours a day
Tel: [phone], option 1
Fax: [phone]
International Customers - 9am to 4pm local time
Tel: [phone]
Fax: [phone]
Visit our site at: www.kontron.com
© 2006 Kontron, an International Corporation. All rights reserved.
The information in this user’s guide is provided for reference only. Kontron does not assume
any liability arising out of the application or use of the information or products described
herein. This user’s guide may contain or reference information and products protected by
copyrights or patents and does not convey any license under the patent rights of Kontron, nor
the rights of others.
Kontron is a registered trademark of Kontron. All trademarks, registered trademarks, and
trade names used in this user’s guide are the property of their respective owners. All rights
reserved. Printed in the United States of America and Canada. This user’s guide contains
information proprietary to Kontron. Customers may reprint and use this user’s guide in other
publications. Customers may alter this user’s guide and publish it only after they remove the
Kontron name, cover, and logo.
Kontron reserves the right to make changes without notice in product or component design as
warranted by evolution in user needs or progress in engineering or manufacturing technology.
Changes which affect the operation of the unit will be documented in the next revision of this
user’s guide.

iiiMUNGO560 User’s Guide
³Contents
Safety Instructions
Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix
When Working Inside a Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x
Preventing Electrostatic Discharge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi
Preface
How to Use This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xv
Customer Comments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvi
Advisory Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvii
Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xviii
Regulatory Compliance Statements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xix
Guarantee and Warranty Policy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxi
Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxi
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxi
Return Procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxii
Limitation of Liability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxiii
Maintaining Your Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxiv
Cleaning Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxiv
Environmental Factors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxiv
Power Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxv
Chapter 1
Introduction
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
I/O Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4
Chapter 2
Jumpers & Connectors
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
Jumpers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
Jumper Locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4
Jumper Pinouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5
LCD Power Selection (J1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5
RTC CMOS Clear (J4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5
Clear CMOS Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6
Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7
Connector List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8

iv MUNGO560 User’s Guide
Connector Pinouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10
SATA Port 0(J8) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10
SATA Port 1 (J9) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10
Chassis Intrusion(J10). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11
2 x LVDS (J12) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12
Reset & Power Switch(J13, J14). . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13
CompactFlash (J15) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13
Primary IDE (J16). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-15
Chassis Speaker Header (J21) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16
COM Port 1 (J25) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16
VGA (J29). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-17
Chassis Fan I/F (J30) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-17
COM Port 2 (J31) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-18
AC ‘97 Audio (J32) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-18
USB 2.0 Port 3 & 4(J33). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-18
CPU Fan I/F (J34). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-19
USB 2.0 Port 1 & 2 (J35) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-19
10/100/1GB Ethernet Ports 1 & 2 (J36) . . . . . . . . . . . . . . . . . . . . 2-20
Power (J37) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-21
LAN Activity Header 1 (J38) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-21
LAN Activity Header 2 (J39) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-21
Mini-PCI (J40) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-22
PCB Edge Connector (32 Bit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-25
PCB Edge Connector (64 Bit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-28
Chapter 3
Hardware
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
Installing the Pentium M Processor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
Installing the Heatsink and Fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
Installing Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Adding a DIMM Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
Chapter 4
Specifications
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3
Processor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3
Chipset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3
Bus Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3
Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3
FLASH Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4

vMUNGO560 User’s Guide
I/O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
USB Ports. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
Serial Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
Serial ATA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
ATA/IDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
Ethernet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
CompactFlash. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Mini-PCI. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
I/O Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
USB Expansion Board. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Audio Speaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Audio Expansion Port. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
BIOS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
OS Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7
Mechanical Dimensions (W x D) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7
Environmental Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8
Operating Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8
Non-operating Temperature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8
Operating Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8
Non-operating Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8
Operating Altitude . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8
Non-operating Altitude . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8
Operating Vibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8
Non-operating Vibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9
Reliability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9
Power Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9
Input Power Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9
Input Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9
Chapter 5
BIOS
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3
Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3
Menu Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4
Legend Bar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5
Advanced Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7
Peripheral Configuration Submenu . . . . . . . . . . . . . . . . . . . . . . . . 5-18
PCI/PnP Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-28
Boot Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-32
Boot Settings Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-33
Security Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-36

vi MUNGO560 User’s Guide
Chipset Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-39
North Bridge Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-39
South Bridge Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-41
Power Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-42
Advanced SMI Enable Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-42
Advanced Resume Event Controls. . . . . . . . . . . . . . . . . . . . . . . . . . 5-43
Exit Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-44
Chapter 6
System Resource Allocations
IRQ Lines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3
DMA Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4
I/O Addresses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5
PC and PC/XT Address Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5
Memory Map. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6
Chapter 7
Block Diagram
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3
Chapter 8
Troubleshooting
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-3
Common Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-4

³Safety Instructions
Contents
Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix
When Working Inside a Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x
Preventing Electrostatic Discharge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi

viii MUNGO560 User’s Guide
This page intentionally left blank.

ix
MUNGO560 User’s Guide
Safety Instructions
Before You Begin
³Before You Begin
Before handling the MUNGO560 , read the instructions and safety guidelines on the following
pages to prevent damage to the product and to ensure your own personal safety. Refer to the
“Advisories” section in the Preface for advisory conventions used in this user’s guide, including
the distinction between Warnings, Cautions, Important Notes, and Notes.
Always use caution when handling/operating the computer. Only qualified,
experienced, authorized electronics service personnel should access the interior
of the computer. The power supplies produce high voltages and energy hazards,
which can cause bodily harm.
Use extreme caution when installing or removing components. Refer to the
installation instructions in this user’s guide for precautions and procedures. If you
have any questions, please contact Kontron Post-Sales Technical Support.
WARNING
High voltages are present inside the chassis when the unit’s power
cord is plugged into an electrical outlet. Turn off system power, turn
off the power supply, and then disconnect the power cord from its
source before removing the chassis cover. Turning off the system
power switch does not remove power to components.

x MUNGO560 User’s Guide
³When Working Inside a Computer
Before taking covers off a computer, perform the following steps:
1) Turn off the computer and any peripherals.
2) Disconnect the computer and peripherals from their power sources or subsystems to
prevent electric shock or system board damage. This does not apply when hot swapping
parts.
3) Follow the guidelines provided in “Preventing Electrostatic Discharge” on the following
page.
4) Disconnect any telephone or telecommunications lines from the computer.
In addition, take note of these safety guidelines when appropriate:
To help avoid possible damage to system boards, wait five seconds after turning
off the computer before removing a component, removing a system board, or
disconnecting a peripheral device from the computer.
When you disconnect a cable, pull on its connector or on its strain-relief loop, not
on the cable itself. Some cables have a connector with locking tabs. If you are
disconnecting this type of cable, press in on the locking tabs before disconnecting
the cable. As you pull connectors apart, keep them evenly aligned to avoid
bending any connector pins. Also, before connecting a cable, make sure both
connectors are correctly oriented and aligned.
CAUTION
Do not attempt to service the system yourself except as explained in
this user’s guide. Follow installation and troubleshooting
instructions closely.

xi
MUNGO560 User’s Guide
Safety Instructions
Preventing Electrostatic Discharge
³Preventing Electrostatic Discharge
Static electricity can harm system boards. Perform service at an ESD workstation and follow
proper ESD procedure to reduce the risk of damage to components. Kontron strongly encourages
you to follow proper ESD procedure, which can include wrist straps and smocks, when servicing
equipment.
You can also take the following steps to prevent damage from electrostatic discharge (ESD):
When unpacking a static-sensitive component from its shipping carton, do not
remove the component’s antistatic packing material until you are ready to install
the component in a computer. Just before unwrapping the antistatic packaging,
be sure you are at an ESD workstation or grounded. This will discharge any static
electricity that may have built up in your body.
When transporting a sensitive component, first place it in an antistatic container
or packaging.
Handle all sensitive components at an ESD workstation. If possible, use antistatic
floor pads and workbench pads.
Handle components and boards with care. Don’t touch the components or contacts
on a board. Hold a board by its edges or by its metal mounting bracket.
Do not handle or store system boards near strong electrostatic, electromagnetic,
magnetic, or radioactive fields.

xii MUNGO560 User’s Guide
This page intentionally left blank.

³Preface
Contents
How to Use This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xv
Customer Comments. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvi
Advisory Conventions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvii
Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xviii
Regulatory Compliance Statements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xix
Guarantee and Warranty Policy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxi
Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxi
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxi
Return Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxii
Limitation of Liability. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxiii
Maintaining Your Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxiv
Cleaning Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxiv
Environmental Factors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxiv
Power Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxv

xiv MUNGO560 User’s Guide
This page intentionally left blank.

xv
MUNGO560 User’s Guide How to Use This Guide
Preface
³How to Use This Guide
This guide is designed to be used as step-by-step instructions for installation, and as a reference
for operation, troubleshooting, and upgrades.
Note: Additional technical information, BIOS updates, and drivers are available on
our web site, www.kontron.com, under Technical Support.
The following is a summary of the chapter contents:
Chapter 1, Introduction, presents the product specifications and system
architecture for the MUNGO560 single board computer.
Chapter 2, Jumpers and Connectors, shows the definitions and locations of
jumpers and connectors that you can easily configure for your system.
Chapter 3, System Installation, describes how to properly mount the CPU and
heat sink and fan.
Chapter 4, Hardware, explains how to install the Pentium M chip, the heat sink
and fan, and memory.
Chapter 5, BIOS, specifies the meaning of each setup parameter and describes
how to get advanced BIOS performance. The POST checkpoint list provides a basic
troubleshooting guide.
Chapter 6, System Resource Allocation, provides additional information on IRQs,
DMA Channels, and memory mapping.
Chapter 7, Block Diagram, details components and the flow of the MUNGO560.
Chapter 8, Troubleshooting, provides help for basic technical issues.

xvi MUNGO560 User’s Guide
³Customer Comments
If you have any difficulties using this user’s guide, discover an error, or just want to provide some
feedback, please send us a message using the online form under “Contact Us” on our web site
(www.kontron.com) under “Technical Support.” Detail any errors you find. We will correct the
errors or problems as soon as possible and post the revised user’s guide in our online Support
Library. Thank you.
Note: You may also use the online form on our web site to submit comments or
concerns about our products, or request technical support.

xvii
MUNGO560 User’s Guide Advisory Conventions
Preface
³Advisory Conventions
Four types of advisories are used throughout this user’s guide to provide helpful information or
to alert you to the potential for hardware damage or personal injury. They are Notes, Cautions,
and Warnings. The following is an example of each type of advisory. Use caution when servicing
any electrical component.
Note: A note is used to make helpful information stand out.
.
Important: An important note indicates information that is important for you to
know.
CAUTION
A CAUTION indicates potential damage to hardware and tells you how
to avoid the problem.
WARNING
A WARNING indicates the potential for bodily harm and tells you how
to avoid the problem.
Disclaimer: We have tried to identify all situations that may pose a warning or caution condition
in this user’s guide. However, Kontron does not claim to have covered all situations that might
require the use of a Caution or Warning.

xviii MUNGO560 User’s Guide
³Unpacking
When unpacking, follow these steps:
1) After opening the box, save it and the packing material for possible future shipment.
2) Remove all items from the box. If any items listed on the purchase order are missing,
notify Kontron customer service immediately.
3) Inspect the product for damage. If there is damage, notify Kontron customer service
immediately. Refer to “Guarantee and Warranty Policy” for the return procedure.

xix
MUNGO560 User’s Guide Regulatory Compliance Statements
Preface
³Regulatory Compliance Statements
This section provides the FCC compliance statement for Class A devices.
³FCC Compliance Statement for Class A Devices
The product(s) described in this user’s guide has been tested and found to comply with the limits
for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the user’s guide, may cause harmful
interference to radio communications. Operation of this equipment in a residential area
(domestic environment) is likely to cause harmful interference, in which case the user will be
required to correct the interference (take adequate measures) at their own expense.
Changes or modifications not expressly approved by Kontron could void the user's authority to
operate the equipment.
Note: The assembler of a personal computer system may be required to test the
system and/or make necessary modifications if a system is found to cause harmful
interference or to be noncompliant with the appropriate standards for its intended
use.

xx MUNGO560 User’s Guide
This page intentionally left blank.