Kontron mITX-DNV User manual

mITX-DNV - Quick Installation Guide - Version 1.2 // www.kontron.com // 1

mITX-DNV - QUICK INSTALLATION GUIDE
Thank you for purchasing the Kontron mITX-DNV embedded board. This document provides information to allow you to quickly
install this product.
Packing Checklist
1. Take the mITX-DNV out of the packing box and check if the unit is properly secure in the plastic bag.
2. Check the contents of the carton box: (*: optional)
mITX-DNV main board
Rear I/O Shield
SATA Cable*
COM Port Cable*
DIO Cable*
2-Ports USB 2.0 Cable*
PS/2 Cable*
3G / 4G Micro SIM Card Holder Kit*

mITX-DNV - Quick Installation Guide - Version 1.2 // www.kontron.com // 2
Top Side Jumper and Internal Connector Locations
Jumper List
Item
Designation
Description
1
JP1
mPCIE / mSATA Selection for MPCIE1
2
JP2
USB Power Selection
3
JP3
AT / ATX Power Mode Selection
4
JP5
MFG Mode Selection
5
JP10
Clear CMOS Selection
6
JP11
Flash Security Override Selection
7
JP15
Power Output Selection for COM1 Pin-9
Internal Connector List
Item
Designation
Description
8
ATX1
2x12-Pin ATX Power Input Wafer
9
FAN1
CPU FAN Wafer
10
FAN2
System FAN Wafer
8
32
9
18
11
12
13
14
15
16
19
10
20
22
23
24
26
27
8
28
30
31
33
6
4
3
2
1
6
5
7
17
21
29
25

mITX-DNV - Quick Installation Guide - Version 1.2 // www.kontron.com // 3
Item
Designation
Description
11
SATA1
SATA Port-1 Connector
12
SATA2
SATA Port-2 Connector
13
SATA3
SATA Port-3 Connector
14
SATA4
SATA Port-4 Connector
15
SATA5
SATA Port-5 Connector
16
SATA6
SATA Port-6 Connector
17
CN17
USB2.0 Port-1, 2 Header
18
FP1
Front Panel Header 1
19
FP2
Front Panel Header 2
20
CN16
RS-232/422/485 COM2 Wafer
21
CN15
8-bit Digital Input / Output Wafer
22
CN21
PS/2 KB/MS Wafer
23
M2B1
M.2 Key-B SSD Slot
24
MPCIE1
mPCIE / mSATA Port-1 Slot
25
CN4
SIM InterfaceWafer for MPCIE1
26
PCIE1
PCIE x8 Slot
27
CN2
GbE LAN LED Header
28
CN5
Wireless Activity LED Header for MPCIE1
29
CN25
General Purpose LED Wafer
30
DIMM1
Channel-0 DDR4 DIMM Slot
31
DIMM2
Channel-1 DDR4 DIMM Slot
32
CN1
CR2032 Battery Holder
33
BZ1
Onboard Buzzer
Jumper Settings
mPCIe / mSATA Selection for MPCIE1 (JP1)
Jumper Position
Description
Pin 1-2
Pin 2-3
X
-
mPCIe
-
X
mSATA
“X” = Jumper set (short) and “-” = jumper not set (open)
2
3
1

mITX-DNV - Quick Installation Guide - Version 1.2 // www.kontron.com // 4
USB Power Selection (JP2)
Jumper Position
Description
Pin 1-2
Pin 2-3
X
-
+5V
-
X
+5VSB
“X” = Jumper set (short) and “-” = jumper not set (open)
AT / ATX Power Mode Selection (JP3)
Jumper Position
Description
Pin 1-2
Pin 2-3
X
-
ATX Power Mode
-
X
AT Power Mode
“X” = Jumper set (short) and “-” = jumper not set (open)
2
3
1
2
3
1

mITX-DNV - Quick Installation Guide - Version 1.2 // www.kontron.com // 5
MFG Mode Selection (JP5)
Jumper Position
Description
Pin 1-2
Pin 2-3
X
-
Normal
-
X
Enable MFG Mode
“X” = Jumper set (short) and “-” = jumper not set (open)
Clear CMOS Selection (JP10)
Jumper Position
Description
Pin 1-2
Pin 2-3
X
-
Normal
-
X
Clear CMOS
“X” = Jumper set (short) and “-” = jumper not set (open)
Flash Security Override Selection (JP11)
Jumper Position
Description
Pin 1-2
Pin 2-3
X
-
Normal
-
X
Flash Security Override
“X” = Jumper set (short) and “-” = jumper not set (open)
2
3
1
2
3
1
2
3
1

mITX-DNV - Quick Installation Guide - Version 1.2 // www.kontron.com // 6
Power Output Selection for COM1 Pin-9 (JP15)
Jumper Position
Description
Pin 1-2
Pin 3-4
Pin 5-6
X
-
-
+5V
-
X
-
RI#
-
-
X
+12V
“X” = Jumper set (short) and “-” = jumper not set (open)
Real I/O Panel Connector Locations
Item
Designation
Description
1
CN18
GbE LAN1, 2 RJ45 Connector
2
CN19
GbE LAN3, 4 RJ45 Connector
3
CN20
GbE LAN5, 6 RJ45 Connector
4
CN22
USB 3.0 Port 3, 4 Connector
5
CN23
USB 3.0 Port 1, 2 Connector
6
CN24
VGA Connector
7
CN26
RS232/422/485 COM1 Connector
1
2
5
4
3
6
7