Kontron ATX-HSW-S User manual

ATX-HSW-S - Quick Installation Guide - Version 1.0 // www.kontron.com // 1
 ATX-HSW-S - QUICK INSTALLATION GUIDE
Thank you for purchasing the Kontron ATX-HSW-S embedded board. This document provides information to allow you
to quickly install this product.
Packing Checklist
1. Take the ATX-HSW-S out of the packing box and check if the unit is properly secure in the plastic bag.
2. Check the contents of the carton box: (*: optional)
ATX-HSW-S main board
Rear I/O Shield
COM Port Cable*
USB 3.0 Cable*
2-Port USB 2.0 Cable*
SATA Cable*

ATX-HSW-S - Quick Installation Guide - Version 1.0 // www.kontron.com // 2
Jumper and Internal Connector Locations
Jumper List
Item Designation Description
1 JP1 Pin-9 Selection for COM3 & COM4
2 JP2 Keyboard Lock Selection
3 JP3 mPCIE LED Indicator Jumper
4 JP5 Protected RTC Selection
5 JP6 mPCIE / mSATA Selection for MPCIE2 (Q87 model only)
6 JP9 mPCIE / mSATA Selection for MPCIE1 (Q87 model only)
7 JP10 Case Open Detection
8 JP11 Terminator Selection for COM1
9 JP12 Terminator Selection for COM2
10 JP13 Flash Descriptor Security Override Selection
11 JP14 Pin-9 Selection for COM1 & COM2
12 JP15 PCIE Configuration Setting for PEG1
2
4
3
5
6
7
8 9 10 11
12
13
14
15
16
1 18
17 19
20 23
22
21
24
25
26
27
28
29
30
31
32
34
35
36
37
43 38 39 33 40
41
42 44
49 47 45
46 48 50
51

ATX-HSW-S - Quick Installation Guide - Version 1.0 // www.kontron.com // 3
Internal Connector List
Item Designation Description
13 ATX1 2x12-pin ATX Power Supply Wafer
14 ATX2 2x2-pin ATX Power Supply Wafer
15 BAT1 CR2032 Battery Holder
16 CN1 USB3.0 Ports-4, 5 Box Header (Q87 model only)
17 CN2 RS-232 COM3 Pin Header
18 CN3 RS-232 COM4 Pin Header
19 CN4 RS-232 COM5 Pin Header
20 CN5 RS-232 COM6 Pin Header
21 CN6 USB2.0 Port-2, 3 Pin Header
22 CN7 USB2.0 Port-6, 7 Pin Header (Q87 model only)
23 CN8 USB2.0 Port-10, 11 Pin Header
24 CN9 16-bit Digital Input / Output Pin Header
25 CN11 RS-232/422/485 COM2 Pin Header
26 CN14 Front Panel Audio Pin Header
27 DIMM1 Channel-A, DIMM-0 DDR3 DIMM Slot
28 DIMM2 Channel-A, DIMM-1 DDR3 DIMM Slot (Q87 model only)
29 DIMM3 Channel-B, DIMM-0 DDR3 DIMM Slot
30 DIMM4 Channel-B, DIMM-1 DDR3 DIMM Slot (Q87 model only)
31 FAN1 System FAN Wafer
32 FAN2 CPU FAN Wafer
33 FAN3 AUX FAN Wafer
34 FP1 Front Panel Pin Header 1
35 FP2 Front Panel Pin Header 2
36 MPCIE1 Full Size mPCIE / mSATA Socket
37 MPCIE2 Full Size mPCIE / mSATA Socket (Q87 model only)
38 PCI1 32-bit, 33MHz PCI Slot 1
39 PCI2 32-bit, 33MHz PCI Slot 2
40 PCI3 32-bit, 33MHz PCI Slot 3
41 PCI4 32-bit, 33MHz PCI Slot 4
42 PCIE1 PCIEx1 Slot 1
43 PCIE2 PCIEx1 Slot 2
44 PEG1 PCIEx16 Slot
45 SATA1 Serial ATA Port-0 Connector
46 SATA2 Serial ATA Port-1 Connector
47 SATA3 Serial ATA Port-2 Connector (Q87 model only)
48 SATA4 Serial ATA Port-3 Connector (Q87 model only)
49 SATA5 Serial ATA Port-4 Connector (H81 model only)

ATX-HSW-S - Quick Installation Guide - Version 1.0 // www.kontron.com // 4
Item Designation Description
50 SATA6 Serial ATA Port-5 Connector (H81 model only)
51 SIM1 SIM Card Holder for MPCIE1

ATX-HSW-S - Quick Installation Guide - Version 1.0 // www.kontron.com // 5
Jumper Settings
Pin-9 Selection for COM3 & COM4 (JP1)
Jumper 1 Position Description
Pin 1-3 Pin 3-5 Pin 5-7 Pin 7-9
X - - - COM3, Pin-9 = +12V
- X - - COM3, Pin-9 = +5V
- - X - COM3, Pin-9 = +5V
- - - X COM3, Pin-9 = RI
Jumper 2 Position Description
Pin 2-4 Pin 4-6 Pin 6-8 Pin 8-10
X - - - COM4, Pin-9 = +12V
- X - - COM4, Pin-9 = +5V
- - X - COM4, Pin-9 = +5V
- - - X COM4, Pin-9 = RI
“X” = Jumper set (short) and “-” = jumper not set (open)
Keyboard Lock Selection (JP2)
Jumper 1 Position Description
Pin 1-2 Pin 2-3
X - Normal
- X Keyboard Locked
“X” = Jumper set (short) and “-” = jumper not set (open)
10
1
9
2
2
3
1

ATX-HSW-S - Quick Installation Guide - Version 1.0 // www.kontron.com // 6
mPCIE LED Indicator Jumper (JP3)
Pin Signal Note
1 LED+
2 LED-
Protected RTC Selection (JP5)
Jumper 1 Position Description
Pin 1-2 Pin 2-3
X - Normal (default position)
- X Clear RTC_RST Register
(board does not boot with the jumper in this position)
“X” = Jumper set (short) and “-” = jumper not set (open)
mPCIE / mSATA Selection for MPCIE2 & MPCIE1 (JP6 & JP9) (only for models with Intel® Q87 Chipset)
Jumper 1 Position Description
Pin 1-2 Pin 2-3
X - mSATA
- X mPCIE
“X” = Jumper set (short) and “-” = jumper not set (open)
1
2
2
3
1
2
3
1

ATX-HSW-S - Quick Installation Guide - Version 1.0 // www.kontron.com // 7
Case Open Detection (JP10)
Jumper Position Description
Pin 1-2
X Case is Opened
- Case is Closed
“X” = Jumper set (short) and “-” = jumper not set (open)
Terminator Selection for COM1 & COM2 (JP11 & JP12)
Jumper 1 Position Description
Pin 1-2
X Terminator is enabled between RX+ & RX-
- Terminator is disabled
Jumper 2 Position Description
Pin 3-4
X Terminator is enabled between TX+ & TX-
- Terminator is disabled
“X” = Jumper set (short) and “-” = jumper not set (open)
Flash Description Security Override Selection (JP13)
Jumper Position Description
Pin 1-2
X Security Measures Defined by BIOS are Over-written
- Security Measures Defined are Set
“X” = Jumper set (short) and “-” = jumper not set (open)
4
1

ATX-HSW-S - Quick Installation Guide - Version 1.0 // www.kontron.com // 8
Pin-9 Selection for COM1 & COM2 (JP14)
Jumper 1 Position Description
Pin 1-3 Pin 3-5 Pin 5-7 Pin 7-9
X - - - COM1, Pin-9 = +12V
- X - - COM1, Pin-9 = +5V
- - X - COM1, Pin-9 = +5V
- - - X COM1, Pin-9 = RI
Jumper 2 Position Description
Pin 2-4 Pin 4-6 Pin 6-8 Pin 8-10
X - - - COM2, Pin-9 = +12V
- X - - COM2, Pin-9 = +5V
- - X - COM2, Pin-9 = +5V
- - - X COM2, Pin-9 = RI
“X” = Jumper set (short) and “-” = jumper not set (open)
PCIE Configuration Setting (JP15)
Jumper 1 Position Jumper 2 Position Description
Pin 1-3 Pin 3-5 Pin 2-4 Pin 4-6
X - X - X16
X - - X X8 x8
- X X - X8 x4
- X - X X8 x4 x4
“X” = Jumper set (short) and “-” = jumper not set (open)
10
1
9
2
21
65

ATX-HSW-S - Quick Installation Guide - Version 1.0 // www.kontron.com // 9
Real I/O Panel Connector Locations
Item Designation Description
1 CN12 GbE LAN2 & USB2.0 Port-8, 9 Connector
2 CN13 GbE LAN1 & USB3.0 Port-0, 1 Connector
3 CN15 DVI-D Connector
4 CN16 Line-Out & Mic-In Audio Jacks
5 CN17 PS/2 Keyboard & Mouse Mini-DIN Connector
6 CN18 DisplayPort Connector
7 CN19 VGA & RS-232/422/485 COM1 Connector
1
4
23
5 6 7