Korg PA Series Quick start guide

CONNECTING THE KORG PA SERIES TO AN EXTERNAL
SEQUENCER (MIDIWORKS)
You can program a new Song on an external sequencer, using Korg PA as a multi-timbral
expander.
Connections and settings via MIDI Interface
In order to connect the Korg PA to a computer, you need to have a computer with the MIDI
interface.
1. Connect the Pa80 and the computer as in the following diagram.
2. Go to “MIDI Setup” . Select the External Sequencer Setup.
PA3X, PA2X
PA3X musikant,
PA800, PA500
Press SEQUENCER to go to the Sequencer mode. Go to the
“Preferences: Sequencer Setup” page. Select the “Extern.Seq.” MIDI
Setup.
PA900, PA600 Select the “Extern.Seq.” MIDI Preset. You can do this by going to the
“MIDI: General Controls” page of the Global mode.
PA1X Press SEQUENCER to go to the Sequencer mode. Go to the
“Preferences: Global Setup” page. Select the “Extern.Seq.” MIDI
Setup.
PA80, PA50 Press GLOBAL, and go to “Page 5 - MIDI Setup” . Select the Ext.Seq
Setup.

Connections and settings via USB to Host
1. In case you will connect the computer and the Pa800 via the USB port, install the Korg
USB MIDI Driver, as explained in the User's Manual of your instrument.
2. Connect the Pa800 and the computer either via the USB Device port, or via the MIDI ports
and a MIDI interface, as shown in the following diagram.
5. Go to “MIDI Setup” . Select the External Sequencer Setup.
PA3X, PA2X
PA3X musikant,
PA800, PA500
Press SEQUENCER to go to the Sequencer mode. Go to the
“Preferences: Sequencer Setup” page. Select the “Extern.Seq.” MIDI
Setup.
PA900, PA600 Select the “Extern.Seq.” MIDI Preset. You can do this by going to the
“MIDI: General Controls” page of the Global mode.
PA1X Press SEQUENCER to go to the Sequencer mode. Go to the
“Preferences: Global Setup” page. Select the “Extern.Seq.” MIDI
Setup.
Note!
External Sequencer - this setting is for programming a Song on an external sequencer
(MidiWorks PA+).