KOVAX PROMA-X ELECTRIC 150 User manual
INSTRUCTION MANUAL
Art.No.: 910-0500
PAGE 2 | PROMA-X ELECTRIC 150
PROMA-X ELECTRIC 150
Electric Random Orbital Sander
150 mm (6”)
page
EXPLODED VIEW 3
PARTS LIST 4
Torque setting 4
WARRANTY SEAL 6
DECLARATION OF CONFORMITY 7
WARNING & CAUTION 8
TECHNICAL DATA 9
Noise & vibrations information 9
Important note 9
Proper use of tool 9
OPERATION & MAINTENANCE 10
How to get started 10
Operating instructions 10
Overload Protection Systems 10
Attaching the back-up pad 11
Further service 11
Cleaning 11
Health & safety information 11
Disposal information 11
PAGE 3 | PROMA-X ELECTRIC 150
10
1
6
736
8
23
9
35
20
21
22
24
25
31
26
28
30
27
29
14
15
11
12
13
38
2
3
45
16
17
18
19
37
39
40
33
34
32
43
TO VACUUM
SYSTEM FOR
CENTRAL VAC
41
42
EXPLODED VIEW
PAGE 4 | PROMA-X ELECTRIC 150
PARTS LIST
ITEM ART.NO. DESCRIPTION QUANTITY
1 910-0500-01 1
LOCK RING ASSEMBLY 1
3 910-0500-03 1
4 910-0500-04 SMALL SPACER-COOLING FAN 1
5 910-0500-05 LARGE SPACER-COOLING FAN 1
6 910-0500-06 GRIP 1
7 910-0500-07 MACHINED HOUSING 1
8 910-0500-08 1
9 910-0500-09 1
10 910-0500-10 END CAP 1
11 910-0500-11 1
POWER CORD ASSEMBLY 1
13 910-0500-13 SR CLAMP 1
14 910-0500-14 CORD SUPPORT PLAT 1
15 910-0500-15 1
16 910-0500-16 1
17 910-0500-17 1
18 910-0500-18 1
19 889 - 5467 1
1
1
SPRING 1
1
HEAT SINK 1
DUST SEAL 1
LINE DEDUCTION 1
1
HEX. NUT (M4) 1
PLUG 1
30 910-0500-30 PLUG 1
31 910-0500-31 4
PAGE 5 | PROMA-X ELECTRIC 150
PARTS LIST
ITEM ART.NO. DESCRIPTION QUANTITY
4
33 910-0500-33 4
34 910-0500-34 SPRING WASHER 4
35 910-0500-35
36 910-0500-36
37 910-0500-37 SOCKET BUTTON HEAD CAP SCREW (M3X8)
38 910-0500-38 SET SCREW (M3X10) 4
39 910-050039 BUTTON HEAD SCREW (M3X10L)
40 910-0500-40 HEX SOCKET HEADLESS SET SCREW (M3X10)
41 910-0500-41 1
x 1
43 910-0500-43 BUTTON FASTENER 3
Torque Setting
ITEM in/lbs. (Nm)
8.67 (0.98)
33 8.67 (0.98)
35 13.1 (1.47)
37 8.67 (0.98)
38 8.67 (0.98)
39 10.4 (1.17)
40 17.34 (1.96)
PAGE 6 | PROMA-X ELECTRIC 150
WARRANTY SEAL
Caution!
In order for the warranty to remain valid under no circumstances should the tool security seals be tampered with.
Any removal of screws or other parts will automatically void the warranty.
VALID WARRANTY
If the seal is completely intact
the warranty is valid.
VOID WARRANTY
If the seal is damaged
the warranty is void.
The seal is placed over the screw hole.
W
A
R
R
A
N
T
Y
IF SEAL IS
BROKEN
PAGE 7 | PROMA-X ELECTRIC 150
DECLARATION OF CONFORMITY
Kovax Europe B.V. | 7602 KC Almelo | The Netherlands
Orbital Sander to which this declaration relates is in conformity with the following standards or other normative
Operating instructions include:
Manufacturer / Supplier:
T: +31 (0)53 434 3131 | F: +31 (0)53 430 4900
www.kovax.eu
We reserve the right to make changes to this manual without prior notice.
Important
Keep the instruction manual in a safe accessible location.
Required personal safety equipment
Please read and comply with
- The Safety Data Sheets (SDS).Contact the suppliers for copies of the material SDS's.
- General Industry Safety & Health Regulations.State and local regulations.
Place and date of issue Company Willem Mulderij , Managing Director
Read operator's manual
Wear ear protection
Wear safety glasses
Wear safety gloves
Wear face mask
WARNING:
CAUTION:
PAGE 8 | PROMA-X ELECTRIC 150
WARNING & CAUTION
WARNING
standards while using this tool.
- The electrical safety of the tool is granted only by using original Kovax back-up pads.
- Read the Safety Data Sheet (SDS) for the work piece or abrasive materials.Contact the suppliers for a copy of the SDS.
- Use the tool with dust extraction.Asuitable dust extraction unit will reduce hazardous dust.
or long hair can get caught in moving parts.
Power tools create sparks which may ignite the dust or fumes.
- Do not expose power tools to rain or wet conditions.Water entering a power tool will increase the risk of electric shock.
CAUTION
- Remove pad wrench before connecting the tool to the power source.
- Keep work area clean and well lit.
attached to the back-up pad.
- Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control of the tool.
- Keep hands clear of the spinning pad during use.
- Do not allow the tool to free speed without taking precautions to protect surrounding people and objects in the event that
the abrasive or back-up pad should come loose.
ADDITIONAL SAFETY WARNINGS
- Make sure that the plug matches the socket. Never modify the plug in any way.Do not use any adapter plugs with
- Always use the tools with a residual current device (RCD) with a rated residual current of 30 mA or less.
PAGE 9 | PROMA-X ELECTRIC 150
TECHNICAL DATA
PROMA-X ELECTRIC 150
POWER 350 W
SPEED
ORBIT
SIZE OF BACK-UP PAD
WEIGHT lbs)
Noise & vibration information
PROMA-X ELECTRIC 150
71 dB(A)
dB(A)
SOUND MEASUREMENT UNCERTAINTY K 3.0 dB
1.77 (5.81 )
1.5
Important note
The noise and vibration values stated in the table are from laboratory testing in conformity with stated codes and
of risk or harm experienced to an individual is unique to each situation and depends upon the surrounding
well as upon the exposure time and the physical condition of the user. Kovax cannot be held responsible for the
consequences of using declared values instead of actual exposure values for any individual risk assessment.
Proper use of tool
manufacturer or the manufacturer’s authorized supplier. Do not use back-up pads that have a working speed of
pad (889-5467). Other back-up pads may reduce performance and will increase vibration.The cooling air vents on
the housing must be kept clean and free of blockages to ensure air circulation. Any maintenance or repair work
requiring the motor housing to be opened may only be carried out by an authorized service centre.
PAGE 10 | PROMA-X ELECTRIC 150
How to get started
this tool it is recommended using Kovax abrasive products.
Operating instructions
-
Note! The sander can develop a torque reaction.
- Make sure the sander is switched off. Select a suitable abrasive and secure it centred to the back-up pad.For optimal
performance we recommend using the Kovax back-up pad (889-5467) and Kovax abrasive products.
-
- The sander can now be started by pressing the lever.
- The max RPM
RPMRPMRPM.
- The Intermediate speeds can be adjusted between 0 RPM and the set maximum speed by adjusting the lever positions.
-
work surface before stopping it.This will prevent gouging of the work surface due to excess speed of the abrasive.
- sing
Overload Protection Systems
The ProMa-X Electric 150 has two systems to protect the motor and circuit board from overloading and overheating.
Downforce Overload System
slightly as a warning to the user. Continuous downforce should be no greater than approximately 5 Kg (11 lb.). If the
release the lever and press down again and continue sanding. Repeated overloading will result in frequent motor
stops and increased tool temperature.
OPERATION & MAINTENANCE
solid red
PAGE 11 | PROMA-X ELECTRIC 150
OPERATION & MAINTENANCE
Temperature Overheat System
reach damaging levels.The tool will not be able to be restarted until the internal temperature cools to a level safe for the
Attaching the back-up pad
Secure the spindle with the pad wrench and unscrew the back-up pad.
Further service
Cleaning
Periodically blow out all the air passages and areas under the shroud with dry compressed air. All plastic parts should be
cleaned with a soft damp cloth. Never use solvents to clean plastic parts. Wear safety glasses.
Health & safety information
Disposal information
an environmentally compatible recycling facility.
The Netherlands
www.kovax.eu
Table of contents
