Koyo DL05 User manual

1
Getting Started 1
In This Chapter. . . .
— Introduction
— Conventions Used
— Selecting the Proper Module

Getting Started
Installation and
Safety Guidelines
1–2 Getting Started
DL05/06 Option Modules, 4th Edition, 07/02
Introduction
This manual will discribe the option modules that are available for the DL05 and
DL06 micro PLC families. It will show you how to select and install an option module
for your PLC.
You will either need a copy of the DL05 User Manual (D0–USER–M) or the DL06
User Manual (D0–06USER–M) at hand when incorporating any one of the option
modules in your PLC.
We realize that even though we strive to be the best, we may have arranged our
information in such a way you cannot find what you are looking for. First, check these
resources for help in locating the information:
•Table of Contents – chapter and section listing of contents, in the front
of this manual.
•Appendices – reference material for key topics, near the end of this
manual.
You can also check our online resources for the latest product support information:
•Internet – the address of our Web site is:
http://www.automationdirect.com
If you still need assistance, please call us at 770–844–4200. Our technical support
group is glad to work with you in answering your questions. They are available
Monday through Friday from 9:00 A.M. to 6:00 P.M. Eastern Standard Time. If you
have a comment or question about any of our products, services, or manuals, please
fill out and return the ‘Suggestions’ card that was shipped with this manual.
Conventions Used
When you see the “light bulb” icon in the left-hand margin, the paragraph to its
immediate right will give you a special tip.
The word TIP: in boldface will mark the beginning of the text.
When you see the “notepad” icon in the left-hand margin, the paragraph to its
immediate right will be a special note.
The word NOTE: in boldface will mark the beginning of the text.
When you see the “exclamation mark” icon in the left-hand margin, the paragraph to
its immediate right will be a warning. This information could prevent injury, loss of
property, or even death (in extreme cases).
The word WARNING: in boldface will mark the beginning of the text.
The beginning of each chapter will list the
key topics that can be found in that
chapter.
1
The Purpose of
this Manual
Supplemental
Manuals
Technical Support
Key Topics for
Each Chapter

Getting Started Installation and
Safety Guidelines
1–3
Getting Started
DL05/06 Option Modules, 4th Edition, 07/02
Selecting the Proper Module
The DL05 Micro PLC only has one option
slot to install an option module. The proper
selection of a module is dependent on the
control application.
The DL06 Micro PLC has four option slots. The option modules can also be added
according to the control application.
C0 C4C2X1 X3 X4 X6 X11 X13 X14 X16 X21 X23 N.C.
C1 C3X2 X5 X7 X10 X12 X15 X17 X20 X22X 0 N. C.
AC( N) 24 V
0V
N.C.
C1 C3Y0 Y15Y12Y10 Y17Y7Y5Y2
C0 C2 Y16Y14Y13Y11Y6Y4Y3Y1
LGG
AC(L)
D0–06DR
2.0AOUTPUT: 6–240V 50 – 60Hz2.0A, 6 – 27V
INPUT: 12 – 24V 3 – 15mA
Y
X
40VA50–60HzPWR: 100–240V
0 1 2 3 4 5 6 7 10 11 12 13 14 15 16 17 20 21 22 23
PORT1 PORT2
TERM
RUN STOP
PWR
RUN
CPU
TX1
RX1
TX2
RX2
There are fifteen option modules available. The specifications and wiring diagrams
for the nine discrete I/O modules can be found in the next chapter. A full description
of five analog modules and one memory module can be found in their respective
chapters in this manual. The D0–DEVNETS, is described in the manual,
D0–DEVNETS–M. The following table lists the modules available.
Part Number Description
D0–10ND3 10 point DC Input
D0–16ND3 16 point DC Input
D0–10TD1 10 point DC Output (sinking)
D0–16TD1 16 point DC Output (sinking)
D0–10TD2 10 point DC Output (sourcing)
D0–16TD2 16 point DC Output (sourcing)
D0–07CDR 4 point DC Input, 3 point Relay Output
D0–08TR 8 point Relay Output
D0–08CDD1 4 point DC Input, 4 point DC Output (sinking)
F0–04AD–1 4–Channel Analog Input, Current
F0–4AD2DA–1 4–Channel Input/2–Channel Output Analog Combination, Current
F0–2AD2DA–2 2–Channel Input/2–Channel Output Analog Combination, Voltage
F0–4AD2DA–2 4–Channel Input/2–Channel Output Analog Combination, Voltage
D0–01MC Memory Cartridge/Real Time Clock (DL05 only)
D0–DEVNETS DeviceNet Slave
Module choices

Getting Started
Installation and
Safety Guidelines
1–4 Getting Started
DL05/06 Option Modules, 4th Edition, 07/02
Before installing the option module in the DL05 option slot or the DL06 option slots
set the necessary jumpers and/or dip switches on the module. Refer to the
chapter(s) that pertains to the module(s) being installed.
The first step in installing the option module is to remove the protective option slot
cover. Remove the cover by squeezing the pinch tabs and lifting the cover off.
Option Module
Slot Covers
Pinch Tabs
C0 C4C2X1 X3 X4 X6 X11 X13 X14 X16 X21 X23 N.C.
C1 C3X2 X5 X7 X10 X12 X15 X17 X20 X22X0 N.C.
AC(N)24V
0V
N.C.
C1 C3Y0 Y15Y12Y10 Y17Y7Y5Y2
C0 C2 Y16Y14Y13Y11Y6Y4Y3Y1
LGG
AC(L)
2.0AOUTPUT: 6–240V 50 – 60Hz 2.0A, 6 – 27V
INPUT: 12 – 24V 3 – 15mA
Y
X
40VA50–60HzPWR: 100–240V
0 1 2 3 4 5 6 7 10 11 12 13 14 15 16 17 20 21 22 23
PORT1 PORT2
TERM
RUN STOP
PWR
RUN
CPU
TX1
RX1
TX2
RX2
D0–06DR
Now, insert the module into the open slot. Locate the module so the printed
information is oriented in the same direction as the markings on the PLC. Be careful
to align the female connector on the printed circuit board of the module with the male
connector on the PLC mother board. Press the module into the slot until the front of
the module is flush with the front of the PLC. Install the remaining modules in the
DL06. Once the modules are in place the PLC is ready to be programmed.
WARNING: Power to the PLCs must be disconnected before inserting or removing a
module. Failure to disconnect power could result in serious damage to a module, the
PLC or both.
Install the Option
Module
Remove the
Slot Cover
Insert the Module