KRAFTWERK 3896 Instruction Manual

Art. 3896
www.KRAFTWERK.eu
!
Please read these instructions carefully to ensure the safe and effective use of this tool.
KRAFTWERK
30 Watt under hood /
under car fluorescent work light
Operating instructions and user manual
Special features
- Super bright 30 Watt fluorescent bulb
- Electronic ballast for quicker start and longer life
- Ratcheting hooks provide safe and firm attachment
- Hooks telescope from 47" to 75" allows light to attach to
most SUV's and trucks
- Soft coated padded hooks helps prevent scratching of the vehicles surface
- Large hook design allows light to be used as an under car light
- Cord : H05VVF 2* 0.75 5m
- UL/CE, RoHS approved
Your dealer:
WARNING!
Please refer to the
warning and cautions
section page 3 of this
document before using
product!
GB
You can download the using instructions in your language under:
www.kraftwerk.eu

2
User instructions
To use the light simply plug into 230 VAC 10 Amp power source such as a common wall receptacle (image 1)
Then simply turn the on/off switch to the ON position (image 2)
When attaching the light to the vehicle please be sure that the light is firmly attached and cannot fall and or scratch the
vehicle. It is the user's responsibility to make sure the light is attached correctly.
Once the light is properly attached it can be rotated to the best position to cast the most light to the desired location by
simply rotating the light. As you rotate the light you will hear the clicking of the ratchets which will hold your light in the
desired position.
Instructions for changing the bulb
- WARNING! Disconnect the light from the power source before attempting any repair
- Replace the bulb with any 30 Watt T-8 style bulb
- On the handle WITHOUT THE ON/OFF SWITCH. Unscrew the six screws from the handle (image 5)
- Carefully pull the two sections of the handle apart. This will expose the wiring and the bulb socket (image 6)
- Carefully ease the bulb socket carefully out of the clear lens tube. Then unplug the bulb
TAKE CARE NOT TO PULL THE WIRING OUT OF THE SOCKET (image 7)
- Once the bulb is removed from the socket simply pull the bulb from the clear tube
- Replace bulb and reassemble
Image 2
Image 6 Image 7
Image 1
Image 5
ON / OFF SWITCH

3
Warnings and cautions
WARNING:
Risk of electrical shock
- Uncoil cord before using
- KEEP CHILDREN AWAY
- Fully insert plug into receptacle
- Grasp plug, NOT CORD, to remove from outlet
- DO NOT USE a damaged cord set
- Inspect cord and light periodically
- DO NOT splice, repair or modify
- DO NOT submerse
- Use in dry location only
WARNING:
Not for use near gas, combustible or explosive materials
WARNING:
This product contains chemicals including lead
Wash hands after handling
DANGER:
Misuse can lead to FIRE or DEATH by electrical shock
Please read carefully and follow all directions before using
Before use:
- A cord set NOT MARKED for OUTDOOR USE is to be used for INDOORS ONLY (see UL label for outdoor marking)
- DO NOT run cord through doorways, hole in ceilings, walls or floors
- Make sure the appliance or tool is off before connecting cord to outlet
- FULLY INSERT plug into outlet
- DO NOT remove, bend or modify any metal prongs or pins of cord
- DO NOT use excessive force to make connections
- Unplug when changing bulb, use only 30 Watt bulb
GB

Art. 3896
GUARANTEE
From date of purchase receipt
2YEARS GUARANTEE
on material- or production-defects
GUARANTEE
© KRAFTWERK Europe AG