Kramer VM-1021N User manual

KRAMER ELECTRONICS LTD.
USER MANUAL
MODEL:
VM-1021N
1:20 Video Distributor
P/N: 2900-300429 Rev 1

VM-1021N –Contents
i
Contents
1Introduction 1
2Getting Started 2
2.1 Achieving the Best Performance 2
2.2 Safety Instructions 3
2.3 Recycling Kramer Products 3
3Overview 4
4Installing in a Rack 7
5Connecting the VM-1021N 8
6VM-1021N Technical Specifications 10
Figures
Figure 1: VM-1021N 1:20 Video Distributor Front Panel 5
Figure 2: VM-1021N 1:20 Video Distributor Rear Panel 6
Figure 3: Connecting the VM-1021N 8

VM-1021N - Introduction
1
1 Introduction
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been
providing a world of unique, creative, and affordable solutions to the vast range of
problems that confront the video, audio, presentation, and broadcasting
professional on a daily basis. In recent years, we have redesigned and upgraded
most of our line, making the best even better!
Our 1,000-plus different models now appear in 14 groups that are clearly defined
by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;
GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:
Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:
Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:
Room Connectivity; GROUP 10: Accessories and Rack Adapters; GROUP 11:
Sierra Video Products; GROUP 12: Digital Signage; GROUP 13: Audio; and
GROUP 14: Collaboration.
Congratulations on purchasing your Kramer VM-1021NN distribution amplifier that
is ideal for the following typical applications:
Broadcast, production, or presentation systems requiring high-quality signal
distribution
Schools, retail, sports bars, other point-of-sale and CCTV applications
Computer RGB or component video distribution

2
VM-1021N - Getting Started
2 Getting Started
We recommend that you:
Unpack the equipment carefully and save the original box and packaging
materials for possible future shipment
Review the contents of this user manual
Go to http://www.kramerelectronics.com/support/product_downloads.asp
to check for up-to-date user manuals, application programs, and to check if
firmware upgrades are available (where appropriate).
2.1 Achieving the Best Performance
To achieve the best performance:
Use only good quality connection cables (we recommend Kramer high-
performance, high-resolution cables) to avoid interference, deterioration in
signal quality due to poor matching, and elevated noise levels (often
associated with low quality cables)
Do not secure the cables in tight bundles or roll the slack into tight coils
Avoid interference from neighboring electrical appliances that may adversely
influence signal quality
Position your Kramer VM-1021N away from moisture, excessive sunlight and
dust
This equipment is to be used only inside a building. It may only be
connected to other equipment that is installed inside a building.
i
!

VM-1021N - Getting Started
3
2.2 Safety Instructions
Caution:
There are no operator serviceable parts inside the unit
Warning:
Use only the power cord that is supplied with the unit
Warning:
Do not open the unit. High voltages can cause
electrical shock! Servicing by qualified personnel only
Warning:
Disconnect the power and unplug the unit from the wall
before installing
2.3 Recycling Kramer Products
The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC
aims to reduce the amount of WEEE sent for disposal to landfill or incineration by
requiring it to be collected and recycled. To comply with the WEEE Directive,
Kramer Electronics has made arrangements with the European Advanced
Recycling Network (EARN) and will cover any costs of treatment, recycling and
recovery of waste Kramer Electronics branded equipment on arrival at the EARN
facility. For details of Kramer’s recycling arrangements in your particular country
go to our recycling pages at http://www.kramerelectronics.com/support/recycling/.
!

4
VM-1021N - Overview
3 Overview
The VM-1021N is a high-performance distribution amplifier for composite or SDI
video signals. It provides controls to compensate for signal losses inherent in long
cable runs.
The VM-1021N is a full broadcast, state-of-the-art, 1:20 video distribution amplifier
designed for studio and other demanding applications. The unit splits a single
input source into twenty identical outputs with no discernible signal degradation.
The outputs are divided into 4 sets of five each, where each set may be
individually trimmed (level and EQ) for maximal flexibility. The machine may be
used to distribute analog or SD-SDI video signals, composite or single component.
The unit features:
High bandwidth of 350MHz (-3dB)
Grouped level (gain) and EQ (peaking) controls
Looping inputs
Selectable input signal termination
DC coupling
Standard 19” rack mount size of 1U
Figure 1 and Figure 2 define the unit.

VM-1021N - Overview
5
VM-1021N –Overview
5
Figure 1: VM-1021N 1:20 Video Distributor Front Panel
#
Feature
Function
1
POWER LED
Illuminates when the device is turned on
2
SET 4 ADJUST EQ Trimmer
Controls cable equalization of SET 4 video outputs 16-20
3
SET 4 ADJUST LEVEL Trimmer
Controls level of SET 4 video outputs 16-20
4
SET 3 ADJUST EQ Trimmer
Controls cable equalization of SET 3 video outputs 11-15
5
SET 3 ADJUST LEVEL Trimmer
Controls level of SET 3 video outputs 11-15
6
SET 2 ADJUST EQ Trimmer
Controls cable equalization of the SET 2 video outputs 6-10
7
SET 2 ADJUST LEVEL Trimmer
Controls level of SET 2 video outputs 6-10
8
SET 1 ADJUST EQ Trimmer
Controls cable equalization of the SET 1 video outputs 1-5
9
SET 1 ADJUST LEVEL Trimmer
Controls level of the SET 1 video outputs 1-5

6
VM-1021N - Overview
Figure 2: VM-1021N 1:20 Video Distributor Rear Panel
#
Feature
Function
10
INPUT BNC Connector
Connects to a composite/component/ analog sync video source
11
LOOP BNC Connector
Selects “75Ω“ or “HI-z” impedance when pressed (for looping select "Hi-z")
12
IN=75Ω Button
Provides video looping capability to increase number of outputs
13
OUT SET 1 BNC Connectors (1-5)
SET 1 of 5 amplified buffered and clamped video outputs 1-5
14
OUT SET 2 BNC Connectors (6-10)
SET 2 of 5 amplified buffered and clamped video outputs 6-10
15
OUT SET 3 BNC Connectors (11-15)
SET 3 of 5 amplified buffered and clamped video outputs 11-15
16
OUT SET 4 BNC Connectors (16-20)
SET 4 of 5 amplified buffered and clamped video outputs 16-20
17
Power Connector
AC connector, fuse and power switch enabling power supply to the unit
6
VM-1021N –Overview

VM-1021N - Installing in a Rack
7
4 Installing in a Rack
This section provides instructions for rack mounting the unit.