Kraus KHU100-26 User manual

KHU100-26 / KHU100-28 / KHU100-30 / KHU100-32 /
KHU101-10 / KHU101-13 / KHU101-14 / KHU101-17 /
KHU101-20 / KHU101-21 / KHU101-22 / KHU101-23 /
KHU101-24L / KHU102-33 / KHU103-32 / KHU103-33 /
KHU104-33 / KHU105-32 / KHU110-27 / KHU111-24 /
KHU111-25 / KHU121-23 / KHU122-23 / KHU123-32
Handmade Stainless Steel
Undermount Kitchen Sink
www.kraususa.com I Toll Free: 1.800.775.0703 I © 2018 Kraus USA Inc. I REV. October 26, 2020
R
INSTALLATION MANUAL

2
Congratulations on the purchase of your new Kraus plumbing fixture!
Please keep the box and packaging materials until your product is completely installed. If you have
any questions, require technical assistance or have any problems with your product:
Please contact our Customer Service Team
1-800-775-0703 / [email protected]
Have the model number available and retain a copy of your receipt with purchase date for
reference.
If for any reason this product does not meet your expectations, please be sure to repack this
product in the original box and packaging material to avoid damage during transit.
DO NOT RETURN TO STORE
STOP

3
For technical assistance or replacement parts, please contact Kraus Customer Service
and one of our representatives will be happy to help:
Toll-Free: 800-775-0703 or [email protected]
The step-by-step guidelines in the installation instructions are a general reference for installing a Kraus sink. Should
there be any discrepancies, Kraus cannot be held liable. It is recommended to install all Kraus products by hiring a
licensed professional.
Prior to Installation:
·Make sure that you have all necessary parts by checking the parts list. If
any part is missing or damaged, please contact Kraus Customer Service at
800-775-0703 for a replacement
·Inspect the sink prior to installation to make sure that it has not been
damaged or during shipping
·Use the cut-out template provided by Kraus
·Observe all plumbing and building codes according to your state
requirements
·Not recommended to be installed with laminate countertop

44
Tools you will need:
NOTE: Specialized tools may be necessary to install Kraus Stainless Steel Kitchen sinks with
countertop materials other than wood, marble or granite.
Safety Goggles Silicone Adhesive Jig Saw Phillips Screwdriver
Putty Knife Tape Measure Pencil Scissors Screwdriver
Drill
KHU100-26
26” x 18” x 10”
Min Cabinet Size: 30”
Matching Grid: KBG-100-26
Drain Model #: ST-1
KHU100-28
28” x 19” x 10”
Min Cabinet Size: 33”
Matching Grid: KBG-100-28
Drain Model #: ST-1
Dimensions:
3 1/2"
(89mm)
16" (406.4mm) 18" (457.2mm)
24" (609.6mm)
26" (660.4mm)
1" (25.4mm)
1"
(25.4mm)
R3/8"
(10mm)
4 1/2"
(115mm)
10"
(254mm)
3 1/2"
(89mm)
17" (431.8mm)
19" (482.6mm)
26" (660.4mm)
28" (711.2mm)
1" (25.4mm)
1"
(25.4mm)
R3/8"
(10mm)
4 1/2"
(115mm)
10"
(254mm)
R3/8"
(10mm)
10 1/4"
(259.5mm)
R3/8"
(10mm)
10 1/4"
(259.5mm)

55
Dimensions:
KHU100-30
30” x 18” x 10”
Min Cabinet Size: 33”
Matching Grid: KBG-100-30
Drain Model #: BST-1
KHU100-32
32” x 17” x 10”
Min Cabinet Size: 36”
Matching Grid: KBG-100-32
Drain Model #: BST-1
KHU101-10
9 1/2” x 18” x 8”
Min Cabinet Size: 12”
Drain Cap #: STC-2
Drain Model #: ST-1
KHU101-13
13” x 15” x 8”
Min Cabinet Size: 15”
Drain Cap #: STC-2
Drain Model #: ST-1
3 1/2"
(89mm)
16" (406mm) 18" (457mm)
28" (711mm)
30" (762mm)
10"
(254mm)
4 1/2"
(115mm) 3 1/2"
(89mm)
17" (432mm)
19" (483mm)
30" (762mm)
32" (813mm)
10"
(254mm)
16" (406mm)
18" (457mm)
8 1/2" (214.7mm)
8 1/2" (214.7mm)
9 1/2" (241.3mm)
7 1/2"
(190.5mm)
13" (330.2mm)
15" (381mm)
13" (330.2mm)
11" (279.4mm)
R3/8"
(10mm)
R3/8"
(10mm)
1" (25.4mm)
1"
(25.4mm)
10 3/8"
(262.7mm)
10 3/8"
(262.7mm)
4 1/2"
(115mm)
1"
(25.4mm)
1" (25.4mm)
R3/8"
(10mm)
R3/8"
(10mm)
R3/8"
(10mm) R3/8"
(10mm)
R3/8"
(10mm)
R3/8"
(10mm)
3 1/2"
(90mm)
3 1/2"
(90mm)
8" (203.2mm)
8"
(203.2mm)
4 1/2"
(114.3mm)
4 1/2"
(114.3mm)
1"
(25.4mm)
1"
(25.4mm)
1"
(25.4mm)
1"
(25.4mm)

66
KHU101-14
14” x 18” x 8”
Min Cabinet Size: 18”
Drain Model #: ST-1
KHU101-17
17” x 17” x 10”
Min Cabinet Size: 21”
Drain Model #: ST-1
*KHU101-20
20” x 18” x 10”
Min Cabinet Size: 24”
Matching Grid: KBG-101-20
Drain Model #: ST-1
KHU101-21
21” x 18” x 10”
Min Cabinet Size: 24”
Matching Grid: KBG-101-21
Drain Model #: ST-1
*KHU101-22
22” x 18” x 10”
Min Cabinet Size: 27”
Matching Grid: KBG-101-22
Drain Model #: ST-1
KHU101-23
23” x 18” x 10”
Min Cabinet Size: 27”
Matching Grid: KBG-101-23
Drain Model #: BST-1
Dimensions:
Typical note: * = Special Order
3 1/2"
(89mm)
3 1/2"
(89mm) 3 1/2"
(89mm)
16" (406mm) 18" (457mm)
21" (533mm)
23" (584mm)
10 3/8"
(262.7mm)
3 1/2"
(89mm)
16" (406mm) 18" (457mm)
4 1/2"
(115mm)
R3/8"
(10mm) 12" (305mm)
14" (356mm)
8" (203.2mm)
15" (381mm)
17" (432mm)
15" (381mm)
17" (432mm)
4 1/2"
(115mm)
R3/8"
(10mm)
10 1/2" (265.5mm)
16" (406mm) 18" (457mm)
19" (483mm)
21" (533mm)
4 1/2"
(114mm)
R3/8"
(10mm)
10 1/2" (265.5mm)
16" (406mm) 18" (457mm)
18" (457mm)
20" (508mm)
10 1/2" (265.5mm)
16" (406mm)
18" (457mm)
20" (508mm)
22" (559mm)
10 1/2" (265.5mm)
R3/8"
(10mm)
R3/8"
(10mm)
10" (254mm)
10" (254mm)
10"
(254mm)
4 1/2"
(115mm)
1" (25.4mm)
1"
(25.4mm)
8 3/8" (212mm)
1"
(25.4mm)
1" (25.4mm)
R3/8"
(10mm)
1"
(25.4mm)
1" (25.4mm)
1"
(25.4mm)
1" (25.4mm)
R3/8"
(10mm)
R3/8"
(10mm)
10" (254mm)
10" (254mm)
3 1/2"
(89mm)
4 1/2"
(115mm)
R3/8"
(10mm)
R3/8"
(10mm)
R3/8"
(10mm)
3 1/2"
(89mm)
4 1/2"
(114mm)
1"
(25.4mm)
1" (25.4mm)
1"
(25.4mm)
1" (25.4mm)

7
KHU102-33
32 3/4” x 19” x 10”
Min Cabinet Size: 36”
Matching Grid: KBG-102-33-1
and KBG-102-33-2
Drain Model #: BST-1 & ST-1
KHU103-32
32” x 19” x 10”
Min Cabinet Size: 36”
Matching Grid: KBG-103-32-1
and KBG-103-32-2
Drain Model #: ST-1 × 2
Drain Cap #: STC-2 × 2
KHU103-33
32 3/4” x 19” x 10”
Min Cabinet Size: 36”
Matching Grid: KBG-103-33-1
and KBG-103-33-2
Drain Model #: BST-1 & ST-1
KHU104-33
32 3/4” x 19” x 10”
Min Cabinet Size: 36”
Matching Grid: KBG-104-33-1
and KBG-104-33-2
Drain Model #: BST-1 & ST-1
Dimensions:
3 1/2"
(89mm)
17" (432mm)
19" (483mm)
14 7/8" (378mm)
32 3/4" (832mm)
10"
(254mm)
14 7/8" (378mm)
3 1/2"
(90mm)
4"
(101.6mm)
6"
(152mm)
3 1/2"
(89mm)
17" (432mm)
19" (483mm)
12 7/8" (327mm)
32 3/4" (832mm)
10"
(254mm)
16 7/8" (429mm)
3 1/2"
(89mm)
17" (432mm)
19" (483mm)
12 7/8" (327mm)
32 3/4" (832mm)
10"
(254mm)
16 7/8" (429mm)
10 1/2"
(265.5mm)
R3/8"
(10mm) 18" (457mm)
32" (813mm)
12" (305mm)
4 1/2"
(114mm)
17" (432mm)
19" (483mm)
R3/8"
(10mm)
R3/8"
(10mm)
10 3/8"
(264.5mm)
1" (25.4mm)
1"
(25.4mm)
4 1/2"
(115mm)
R3/8"
(10mm)
10"
(254mm)
1"
(25.4mm)
1" (25.4mm)
10 3/8"
(263mm)
R3/8"
(10mm)
R3/8"
(10mm)
1" (25.4mm)
1"
(25.4mm)
4 1/2"
(115mm)
10 3/8"
(263mm)
1"
(25.4mm)
1" (25.4mm)
R3/8"
(10mm)
R3/8"
(10mm)
4 1/2"
(115mm)

8
KHU105-32
30 1/2” x 20” x 10”
Min Cabinet Size: 36”
Matching Grid: KBG-105-32-1 and
KBG-105-32-2
Drain Model #: BST-1 & ST-1
KHU110-27
27” x 19” x 10”
Min Cabinet Size: 30”
Matching Grid: KBG-110-27
Drain Model #: ST-1
Drain Cap #: STC-2
KHU111-24
24” x 18” x 10”
Min Cabinet Size: 27”
Matching Grid: KBG-111-24
Drain Model #: ST-1
KHU111-25
25” x 18” x 10”
Min Cabinet Size: 30”
Matching Grid: KBG-111-25
Drain Model #: ST-1
Drain Cap #: STC-2
KHU121-23
23” x 18 3/4” x 10”
Min Cabinet Size: 27”
Matching Grid: KBG-121-23
Drain Model #: BST-1
Dimensions:
3 1/2"
(89mm)
3 1/2"
(89mm)
10"
(254mm)
18" (457.2mm)
23" (584mm)
25" (635mm)
4 1/2"
(114mm)
16" (406.4mm)
4 1/2"
(114mm)
17" (432mm)
19" (483mm)
4 1/2"
(114mm)
4 1/2"
(114mm)
27" (686mm)
25" (635mm)
R3/8"
(10mm)
10"
(254mm)
18 3/4" (476mm) 16 3/4" (426mm)
23" (584mm)
21" (533mm)
10 1/2"
(265.5mm)
18" (457mm)
20" (508mm)
16" (406mm)
18" (457mm)
10 1/2"
(265.5mm)
30 1/2" (775mm)
14" (356mm) 13 1/2" (343mm)
18" (457mm)
16" (406mm)
9 5/8"
(244mm)
22" (559mm)
24" (610mm)
R3/8"
(10mm)
R3/8"
(10mm)
10"
(254mm)
4 1/2"
(114mm)
1" (25.4mm)
1"
(25.4mm)
3 1/2"
(90mm)
1" (25.4mm)
1"
(25.4mm)
3 1/2"
(89mm)
5 7/8"
(150mm)
10"
(254mm)
R3/8"
(10mm)
R3/8"
(10mm)
10 1/2"
(265.5mm)
9 5/8"
(244mm)
R3/8"
(10mm)
1"
(25.4mm)
1" (25.4mm)
4 1/2"
(114mm)
4 1/2"
(114mm)
1" (25.4mm)
1" (25.4mm)
R3/8"
(10mm)
R3/8"
(10mm)
3 1/2"
(89mm)
10"
(254mm)
9 5/8"
(244mm)
10 1/2" (265.5mm)
R3/8"
(10mm)
1" (25.4mm)
1" (25.4mm)
10 1/2" (265.5mm)
R3/8"
(10mm)

9
KHU122-23
23 3/4” x 18 3/4” x 10”
Min Cabinet Size: 27”
Matching Grid: KBG-122-23
Drain Model #: BST-1
KHU123-32
32” x 20" x 10”
Min Cabinet Size: 36”
Matching Grid: KBG-123-32-1
and KBG-123-32-2
Drain Model #: BST-1 & ST-1
Dimensions:
KHU101-24L
24” x 18 1/2" x 12”
Min Cabinet Size: 27”
Matching Grid: KBG-101-24
Drain Model #: ST-1
Drain Cap #: STC-2
17" (431.8mm)
18 1/2" (469.9mm)
22 1/2" (571.5mm)
24" (609.6mm)
3 1/2"
(89mm)
4 1/2"
(114.3mm)
12" (304.8mm)
12 1/2" (316.3mm)
R3/8"
(10mm)
18 3/4" (476mm) 16 3/4" (426mm)
23 3/4" (603mm)
21 3/4" (552mm)
10 1/2"
(265.5mm)
15" (381mm)
17" (432mm)
20" (508mm)
18" (457mm)
32" (813mm)
18" (457mm) 11" (279mm)
10"
(254mm)
8"
(203mm)
10"
(254mm)
R3/8"
(10mm)
R3/8"
(10mm)
3 1/2"
(89mm)
5 7/8"
(150mm)
1"
(25.4mm)
1" (25.4mm)
3 1/2"
(89mm)
7 1/8"
(180mm)
R3/4"
(20mm)
R3/4"
(20mm)
10 1/4" (260mm)
8 3/8" (214mm)
1" (25.4mm)
1"
(25.4mm)
3/4" (19mm)
3/4"
(19mm)
R3/8"
(10mm)

10
Undermount Installation
Step 1. Determine reveal type
·Use scissors to cut along the line of the paper template for your desired reveal type (Negative, Positive, or Flush
Reveal)
KRAUS Recommended Installation Type
3/8" Positive Reveal
Flush/Zero Reveal
1/8" Negative Reveal
1/8" NEGATIVE
FLUSH/ZERO REVEAL
3/8" POSITIVE
CENTERLINE