Kraus KSD-80 User manual

Kraus Kitchen Soap Dispenser
KSD-80
www.kraususa.com I Toll Free: 1.800.775.0703 I © 2018 Kraus USA Inc. I REV. August 13, 2019
R
INSTALLATION GUIDE

Congratulations on the purchase of your new
Kraus plumbing fixture!
Please keep the box and packaging materials until your product is completely
installed. If you have any questions, require technical assistance, or have any
problems with your product:
Please contact our Customer Service Team
1-800-775-0703 / [email protected]
Have the model number available and retain a copy of your receipt with purchase date for reference.
If for any reason this product does not meet your expectations, please be sure to repack this product
in the original box and packaging material to avoid damage during transit.
DO NOT RETURN TO STORE
STOP

For technical assistance or replacement parts, please contact Kraus
Customer Service and one of our representatives will be happy to help:
Toll-Free: 800.775.0703 or [email protected]
The step-by-step guidelines in the installation instructions are a general reference for installing
a Kraus Sink. Should there be any discrepancies, Kraus cannot be held liable. It is recommended
to install all Kraus products by hiring a licensed professional.
PRIOR TO INSTALLATION
• Make sure you have all necessary parts by checking the diagram and parts
list. If any part is missing or damaged, please contact Kraus Customer
Service at 800-775-0703 for a replacement.
•Pre-drilled hole size requirement: 1 1/4”
• Max countertop thickness: 1 3/8”

Diagram and Parts List:
d
c
b
a
e
a. Pump
b. Dispenser Base
c. Washer
d. Mounting Nut
e. Dispenser Bottle
Replacement Parts List Finish/Color Part #
CH,SFS,ORB KP06150
KP06151
KP06152
KP06153
KP06154
CH,SFS,ORB

Step 1
Disassemble soap dispenser.
d
c
b
a
e

Step 2
Install dispenser base (b) with washer attached into the hole in the countertop.
Re-install washer (c) and mounting nut (d) on the dispenser base (b) from underneath the
countertop. Tighten mounting nut (d) by hand.
b
d
c

Step 3
Screw the dispenser bottle (e) to the dispenser base (b) from underneath the
countertop. Tighten as required. Fill the dispenser bottle (e) from the top with up to
17 ounces of soap.
e

Step 4
Reinsert pump (a) into dispenser base (b) from the top. Press the pump several
times to make sure soap is evenly distributed.
aPress
b

Kitchen Accessories Warranty
Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc.
(“Kraus”).
Kraus extends this warranty to the original purchaser for personal household use of the “Kitchen
Accessories” in their original location. The warranty is non-transferable.
Kraus warrants the structure and finish of the product (Kitchen Accessories) to be free from
defects in material and workmanship under normal usage for a period of one (1) years.
The warranty commences from the initial date of purchase by the owner or trade professional,
from an authorized Kraus dealer, through the one (1) year term of the original owner or end-user.
Any product reported to the authorized dealer or to Kraus as being defective within the
warranty period will be repaired or replaced with a product of equal value at the option of
Kraus. This warranty extends to the original owner or end-user, and is not transferable to a
subsequent owner.
Restrictions
This warranty does not cover antediluvian, discontinued, or display products, whether such items
are purchased at discount outlets, unauthorized dealers, and/or sold on clearance.
This warranty does not cover instances of negligence, misuse, abuse, improper installation,
carelessness, accident, hard water or mineral deposits, exposure to corrosive materials,
misapplication, damages caused by improper maintenance, alteration of the product, or failure
to follow care or installation instructions enclosed with your product. Avoid using abrasive
cleaners such as powders, bleach, ammonia, alcohol, or chlorine. Avoid using abrasive pads,
steel wool, or wire brushes, as these will damage and wear down the finish.
This warranty does not apply unless the Kraus product is installed by a fully insured and licensed
trade professional. Kraus insists that such professionals have experience in the installation of
bathroom and kitchen manufactured goods.

This warranty does not cover labor charges or costs of removal and reinstallation of said product.
This warranty does not allow recovery of incidental or consequential damages such as loss of use,
delay, property damage, or other consequential damages, and Kraus accepts no liability for
such damages.
This warranty does not cover Marine or Outdoor Installation.
Except as otherwise provided above, Kraus makes no warranties, expressed or implied, including
warranties of merchantability and fitness for a particular purpose, or compliance with any code.
Shipping charges will be covered for the first (1) year of the warranted replacement part or product
(HI, AK, and Puerto Rico shipping charges may apply). International shipping fees are not included.
Commercial Warranty
Kraus extends the above warranty for a period of one (1) year to purchasers of products for
industrial, commercial, and business use.
All incidental or consequential damages are specifically excluded. No additional warranties,
express or implied are given, including but not limited to, any implied warranty of merchantability
or fitness for a particular purpose.
Some states do not allow the exclusion or limitation of incidental or consequential damages, or
limitations on how long an implied warranty lasts, so the above limitations or exclusions may not
apply to you.
This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state.

If you are a HOMEOWNER please contact a Kraus Customer Service Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
Toll-free 800-775-0703
[email protected]
If you are a PLUMBING CONTRACTOR OR TRADE PROFESSIONAL please contact a Kraus Pro
Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
516-801-8955
[email protected]
If you are an AUTHORIZED PARTNER please contact a Partner Support Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
516-801-8954
[email protected]
In requesting warranty service, please be ready to provide:
1. Proof of purchase
2. A description of the problem

Register Your Kraus Product
Activate Your Warranty
Access Premium Customer Support
Get Product Information
REGISTER TODAY
http://www.kraususa.com/registration
R
IMPORTANT

Sellette Single Handle
Commercial Style Pull-Down
Kitchen Faucet
KPF-1683
TM
www.kraususa.com I Toll Free: 1.800.775.0703 I © 2018 Kraus USA Inc. I REV. May 6, 2020
R
INSTALLATION MANUAL

Congratulations on the purchase of your new
Kraus plumbing fixture!
Please keep the box and packaging materials until your product is
completely installed. If you have any questions, require technical
assistance or have any problems with your product:
2
Please contact our Customer Service Team
1-800-775-0703 / [email protected]
Have the model number available and retain a copy of your
receipt with purchase date for reference.
If for any reason this product does not meet your expectations,
please be sure to repack this product in the original box and
packaging material to avoid damage during transit.
DO NOT RETURN TO STORE
STOP

Prior to Installation:
·Make sure you have all necessary parts by checking the diagram and
parts list. If any part is missing or damaged, please contact Kraus
Customer Service at 800-775-0703 for a replacement.
·Turn off the hot and cold water supply at the angle stops and turn on
the old faucet to release any built up pressure. Remove existing faucet.
Clean sink or countertop to remove any debris, plumber’s putty, or
silicone.
·Flush angle stops to release any debris prior to installation.
·Pre-drilled hole size requirement: 1 3/8" (min) - 1 1/2" (max)
·Max countertop thickness without deck plate: 2 1/4”
·Max countertop thickness with deck plate: 1 3/4”
·1, 2 or 3 hole installation
3
For technical assistance or replacement parts, please contact Kraus
Customer Service and one of our representatives will be happy to help:
Toll-Free: 800-775-0703 or [email protected]

44
Diagram and Parts List
1
2
8B
8A 9
3B
3A
4A
4C
4D
5
6
7
4B
10

55
Diagram and Parts List Tools you will need
1. Spray Head
2. Faucet Body
3. Deck Plate Assembly
A. Deck Plate
B. Base Plate
4. Mounting Hardware
A. Rubber Washer
B. Metal Washer
C. Mounting Nut
D. Mounting Screws
5. Spray Hose
6. Weight
7. Quick Connector
8. Hot and Cold Nylon Waterlines
A. Cold
B. Hot
9. Hex Wrench
10. Base O-Ring
Adjustable Wrench
Silicone Sealant
(optional)
Phillips Screwdriver
Safety Goggles

66
Installer Tip:
Shut off main water supply before installing new faucet.
Faucet Installation Procedure
8 5/8"
(220mm)
7"
(178mm)
23 1/4" (589mm)
8 3/4"
(223mm)
11 1/2" (292mm)
10 1/2"
(266mm)
* Optional Deck Plate
3/8" Compression
2 1/2"
(64mm)
Ø1 1/2" (37mm)
10 3/8"
(265mm)
1/2"
(13mm)
1/2"
(13mm)
10 3/4"
(273mm)
4 5/8"
(117mm)
MAX
2 1/4"
(57mm)

7
Step 1A. Faucet installation - with deck plate
Step 1B. Faucet installation - without deck plate
For three-hole installation:
Deck plate (3A), base plate
(3B), and silicone sealant
(optional) are required.
For single-hole installation:
Deck plate (3A), base plate
(3B) and silicone sealant
are NOT required.
3A
3B

8
Step 2. Install faucet and mounting hardware
Step 3. Secure mounting hardware
Insert faucet body (2) into
hole in countertop or deck
plate assembly (3). Install
mounting hardware (4A, B, C & D)
from underneath the
countertop.
Adjust direction of faucet
body (2) so that handle is on
right side of faucet. Tighten
mounting nut (4C) until snug.
Tighten mounting screws
(4D) to nut with a Phillips
screwdriver until snug.
4A
4C
4D
4C
4D
4B