KTI Networks KCD-300 User manual

Specifications :
Industrial 10/100Base-TX to
100Base-FX Media Converters
The industrial KCD-300 media converter series provides industrial strength Ethernet copper-to-fiber
media conversion, allowing for 10Base-T-100Base-FX or 100Base-TX-100Base-FX over multi-mode
or optional single-mode fiber optical media.
Benefits :
 Comprehensive configuration settings to increase flexibility for application needs
 Wide operating temperature range for temperature critical environment
 Support DIN rail mounting and panel mounting
 Provide two power input types to meet more application needs
 Accept wide power input voltage range for application flexibility
 Industrial-rated Emission and Immunity performance
Key Features :
 Support full wire speed conversion for 10/100 speed and media types
 Support auto-negotiation 10/100Mbps or forced mode on TP copper port
 Auto MDI/MDI-X crossover function on the TP copper port
 Provide Link Fault Pass Through function
 Provide comprehensive manual configuration settings
 Transparent conversion to 802.1Q VLAN tagged packets
 Provides Far End Fault function on FX (fiber) port
 Low power consumption
 Two power interface types: screw terminal block and DC Jack
 Supports wide power input voltage range
 Supports DIN rail mounting and optional screwed plane mounting
 Supports wide operating temperature range
 Industrial-rated Emission and Immunity performance
Conversion 10BASE-T to 100BASE-FX
100BASE-TX to 100BASE-FX
Conversion Methods Smart-forward mode :
- Store-and-forward for 10M to 100M
- Direct conversion for 100M to 100M
Store-and-forward always mode
Packet Types Transparent conversion with no modification to :
- Standard IEEE 802.3 Ethernet packet frames
- IEEE 802.1Q tagged packet frames
TP Port Shielded RJ-45 jack
Auto MDI/MDI-X crossover function
Auto-negotiation function for speed and duplex mode
Full-duplex and half-duplex support
10Mbps - supports Cat. 3,4,5 UTP cable up to 100m
100Mbps - supports Cat. 5 UTP cable up to 100m
KCD-300
DIN Rail Mounting Bracket
Panel Mounting Bracket
080110

FCC Part 15'Class B
CISPR 22 Class B
Katron Technologies Inc.
15F-7, No. 79, Sec. 1, Hsin Tai Wu Rd.,
Hsi-chih, Taipei Hsien, Taiwan.
Te l :886-2-2698-3878
Fax:[phone]
E-mail:[email protected]
URL:http://www.ktinet.com.tw
KTI Networks Inc.
7400 Harwin Dr., Suite 120 Houston,
Texas 77036 U.S.A.
Te l :713-266-3891
Fax:[phone]
E-mail:[email protected]
URL:http://www.ktinet.com
Trademarks: All brand names are trademarks or registered
trademarks of their respective holders.
This information is subject to change without prior notice.
Fiber (FX) Port Multimode ST, SC, Single mode SC
100Mbps Full-duplex and half-duplex support
MMF 50/125µm, 62.5/125µm fiber cable
SMF 9/125µm cable
Far End Fault Indication support
Flow Control IEEE 802.3x for full-duplex, Back pressure for half-duplex
LEDs - Power status
- TP port link, activity, speed, duplex status
- Per FX port link, activity, optical link status
Configuration Setting Switches Auto/forced mode, TP speed, TP duplex FXduplex
DC Power Input Screwed terminator block : 2 pairs of +/- contacts
DC jack : -D 6.3mm / + D 2.0mm
Operating voltage range : +7 - +30VDC
Power Consumption 3W max. @30VDC power input
Dimension 28 x 82 x 95 mm, Weight : 250g
Housing Enclosed metal with no fan
Mounting Support DIN Rail mounting, Panel mounting
Environment Operating Temperature: See ordering information
Storage Temperature: -20OC ~ 85OC
Relative Humidity: 5% ~ 95% non-condensing
Approval FCC Class B, CE/EMC Class B, EN60950 safety
Fiber Optical Specification :
Model FX &Cable Wavelength Tx Power Rx Sensitivity Rx Max.Power
-T ST MMF 1310nm -19 ~-14 dBm -31 dBm -14 dBm
-C SC MMF 1310nm -19 ~-14 dBm -31 dBm -14 dBm
-C1 SC MMF 1310nm -20 ~-14 dBm -31 dBm 0 dBm
-SA2 SC SMF 1310nm -15 ~-8 dBm -31 dBm -7 dBm
-SL2 SC SMF 1310nm -15 ~-8 dBm -30 dBm -7 dBm
-SL3 SC SMF 1310nm -15 ~-8 dBm -34 dBm 0 dBm
-SL4 SC SMF 1310nm -5 ~0 dBm -35 dBm -3 dBm
-SL10 SC SMF 1550nm -5 ~0 dBm -35 dBm -3 dBm
-W3515 Bi-Di SC SMF Tx 1310nm -14 ~-8 dBm -31 dBm 0 dBm
Rx 1550nm
-W5315 Bi-Di SC SMF Tx 1550nm -14 ~-8 dBm -31 dBm 0 dBm
Rx 1310nm
EMI EMS Safety Environmental Tests :
Ordering Information :
Specifications
Class B
Class B
< 75 W
Clause 5
+/-8KV
Power:+/-4KV
Data:+/-2KV
Level 3
50Hz 40A/m
Interruption : C
Dips : A
Strength:10V/m
TP, 1500VAC/60sec.
TP, 500VDC/10Mohm
-20OC, 96hrs
+70OC 40%RH 96hrs
+60OC 90%RH 96hrs
Test
FCC/EMI
CE/EMC/EMI
CE/EMC/Harmonic
CE/EMC/VFF
CE/EMC/EMS
ESD Test
RS Test
EFT/BURST
Surge Immunity
CS Test
Magnetic Field Imm.
Voltage Dips Imm.
Safety
Dielectric Voltage
Insulation Resistance
Cold Test
Dry Heat Test
Damp Heat Test
Storage Test
Vibration Test
Standard
FCC Rule Part 15
EN55022, CISPR 22
EN 61000-3-2
EN 61000-3-3
EN 55024
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-8
IEC 61000-4-11
EN 60950, IEC 60950
IEEE 802.3
IEEE 802.3
IEC 68-2-1 Test Ad
IEC 68-2-2 Test Bd
IEC 68-2-3
IEC 68-2-48
IEC 68-2-34
+85OC 40%RH 96hrs
-20OC 96hrs
-T
-C
Operating
Temperature
-10 ~ 70OC
-10 ~ 70OC
-20 ~ 70OC
-20 ~ 70OC
-20 ~ 70OC
-20 ~ 70OC
ST MMF
FX Port
Fiber
Model
KCD-300-xxx
SC MMF
SC MMF-C1
SC SMF-SA2
SC SMF-SL3
SC SMF-SL4
2km
Ref.
Distance
2km
2km
20km
30km
-20 ~ 70OC
SC SMF-SL2 20km
40~50km
-20 ~ 70OC
SC SMF-SL10 100km
KCD-3PB Panel mounting
bracket for KCD-300
-20 ~ 70OC
Bi-Di SC SMF-W3515 15~20km
-20 ~ 70OC
Bi-Di SC SMF-W5315 15~20km
080110