Kubota M7-132 User manual

English (Europe)

Code No. 3J080-5210-2

M7132·M7152·M7172MODELS

OPERATOR'S MANUAL

AW . H . 2 - 2 . - . AK

M7132·M7152·M7172

READ AND SAVE THIS MANUAL

KUBOTA Corporation is ···

Since its inception in 1890, KUBOTA Corporation has grown to

rank as one of the major firms in Japan.

To achieve this status, the company has through the years

diversified the range of its products and services to a remarkable

extent. 30 plants and 35,000 employees produce over 1,000

different items, large and small.

All these products and all the services which accompany them,

however, are unified by one central commitment. KUBOTA makes

products which, taken on a national scale, are basic necessities.

Products which are indispensable. Products which are intended to

help individuals and nations fulfill the potential inherent in their

environment. KUBOTA is the Basic Necessities Giant.

This potential includes water supply, food from the soil and from

the sea, industrial development, architecture and construction, and

transportation.

Thousands of people depend on KUBOTA's know-how, technology,

experience and customer service. You too can depend on

KUBOTA.

Abbreviations Definitions Abbreviations Definitions

ABBREVIATION LIST

2 Wheel Drive

4 Wheel Drive

American Petroleum Institute

American Society of Agricultural and

Biological Engineers, USA

American Society for Testing and

Materials, USA

Continuously Variable Transmission

Diesel Exhaust Fluid

Dual Traction [4WD]

Feet Per Minute

Diesel Particulate Filter

Glide Shift Transmission

2WD

4WD

API

ASABE

ASTM

CVT

DEF

fpm

DPF

GST

High Speed-Low Speed

Hydrostatic Transmission

Meters Per Second

Power Take Off

Right-hand and left-hand sides are

determined by facing

in the direction of forward travel

Roll-Over Protective Structures

Revolutions Per Minute

Revolutions Per Second

Society of Automotive Engineers, USA

Selective Catalytic Reduction

Slow Moving Vehicle

Hi-Lo

HST

m/s

PTO

RH/LH

ROPS

rpm

r/s

SAE

SCR

SMV

Intended use

This machine is designed solely for use in customary agricultural or similar operations. Use in any other way is

considered as contrary to the intended use. Compliance with and strict adherence to the conditions of operation,

service, and repair as specified by the manufacturer, also constitute essential elements of the intended use.

This machine should be operated, serviced, and repaired only by persons who are familiar with its particular

characteristics and who are acquainted with the relevant safety procedures.

Accident prevention regulations, all other generally recognized regulations on safety and occupational medicine,

and all road traffic regulations must be observed at all times.

Any arbitrary modifications carried out to this machine may relieve the manufacturer of liability for any resulting

damage or injury.

manufacturer or distributor of the machine

the model designation of the machine

the name or type of publication

the part number or publication number by which

the manual may be ordered

the date of issue

the publication date

Kubota.Corporation

M7132/M7152/M7172

Operator's Manual

3J080-5210-2

31 May 2017

18 July 2018

the language in which the manual is written English

UNIVERSAL SYMBOLS

As a guide to the operation of your tractor, various universal symbols have been utilized on the instruments and controls.

The symbols are shown below with an indication of their meaning.

BGeneral

Safety Alert Symbol

Master System Warning

System Abnormality

Fast

Slow

Creep

Read Operator's Manual

Lock

ON (Engaged)

OFF (Disengaged)

Service

Security

BEngine-related

Diesel Fuel

Hourmeter/Elapsed Operating Hours

Engine Coolant-Temperature

Low Temperature Regulation

Engine Intake/Combustion Air-Filter

Engine Oil-Pressure

Water Separator

Engine-Warning

Engine-Rotational Speed

Engine-Rev Limiter

Engine-Over Speed

Engine-RPM Memory A

Engine-RPM Adjuster

Engine-RPM Increase

Engine-Run

Engine-Start

Engine-Stop

Electrical Power-accessories

Diesel Preheat/Glow Plugs

(Low Temperature Start Aid)

Regeneration

Regeneration inhibit

Regeneration (Switch)

Parked Regeneration

DEF/AdBlue®-Level

DEF/AdBlue®-Low Level

DEF/AdBlue®-Poor Quality

DEF/AdBlue®-Trouble

DEF/AdBlue®-Thawing

BVehicle body-related

Travel Direction-Forward

Travel Direction-Rearward

Travel Direction

4-Wheel Drive-On

UNIVERSAL SYMBOLS

4-Wheel Drive-Automatic

Headland Management System

Cruise Control

Limp Home

Escape

Operator Presence Control

Auto-Transmission

Auto-Transmission-Sensitivity

Auto-Transmission-Road Control

Auto-Transmission-Field Control

Transmission Oil Filter

Low Temperature Regulation

Gear Shifting Warning

Clutch

Brake

Parking brake

Parking brake/Brake Oil

Air brake

Trailer Brake

Trailer Brake Warning

Differential Lock

Differential Lock-Automatic

Steering Wheel-Tilt

Steering Wheel-Telescope

Automatic Steering Control

Steering Oil Filter

Front Suspension

Front Suspension-Automatic

Front Suspension-Down

Front Suspension-Up

Front Suspension-Lock

BPTO-related

PTO-Off (Disengaged)

PTO-On (Engaged)

PTO-540 rpm

PTO-540E rpm

PTO-1000 rpm

PTO-1000E rpm

PTO-Front

PTO-Rear

BHydraulic-related

Draft Control

Position Control

Hydraulic Oil Filter

Lift Arm Control-Up/Transport

Lift Arm Control-Up

Lift Arm Control-Down

Lift Arm Control-Block

Lift Arm Control-Float

Lift Arm Control-Lock

3-Point Lifting/Lowering

UNIVERSAL SYMBOLS

Lift Arm-Height

Remote Cylinder-Retract

Remote Cylinder-Extend

Remote Cylinder-Float

Remote Cylinder-Lock

BElectric-related

Battery Charging Condition

Master Lighting Switch

Headlight-Low Beam

Headlight-High Beam

Head Light-Flashing

Work Light

Position Lamps

Direction indicator

Direction indicator-Trailer

Hazard Warning Lights

Audible Warning Device

Beacon Light

Windscreen Wiper

Windscreen Wiper-Intermittent

Windscreen Washer

Rear Window Defroster

FOREWORD

SAFETY FIRST

IMPORTANT :

NOTE :

Indicates an imminently hazardous situation which, if not

avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not

avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not

avoided, could result in minor or moderate injury.

Indicates that equipment or property damage could result if

instructions are not followed.

Gives helpful information.

You are now the proud owner of a KUBOTA Tractor. This tractor is a product of

KUBOTA quality engineering and manufacturing. It is made of fine materials and

under a rigid quality control system. It will give you long, satisfactory service. To

obtain the best use of your tractor, please read this manual carefully. It will help you

become familiar with the operation of the tractor and contains many helpful hints

about tractor maintenance. It is KUBOTA's policy to utilize as quickly as possible

every advance in our research. The immediate use of new techniques in the

manufacture of products may cause some small parts of this manual to be

outdated. KUBOTA distributors and dealers will have the most up-to-date

information. Please do not hesitate to consult with them.

This symbol, the industry's ''Safety Alert Symbol'', is used throughout this manual

and on labels on the machine itself to warn of the possibility of personal injury.

Read these instructions carefully. It is essential that you read the instructions and

safety regulations before you attempt to assemble or use this unit.

CONTENTS

SAFE OPERATION....................................................................................................................13

SERVICING OF TRACTOR .......................................................................................................29

WARRANTY........................................................................................................................................................ 30

SCRAPPING THE TRACTOR AND ITS PROCEDURE ..................................................................................... 30

SPECIFICATIONS......................................................................................................................31

SPECIFICATION TABLE..................................................................................................................................... 31

TRAVELLING SPEEDS ...................................................................................................................................... 34

IMPLEMENT LIMITATIONS.......................................................................................................36

TRAILER LOAD CAPACITY ............................................................................................................................... 37

FRONT LOADER................................................................................................................................................ 48

INSTRUMENT PANEL AND CONTROLS .................................................................................50

SWITCHES AND HAND CONTROLS ................................................................................................................ 50

INSTRUMENT PANEL ........................................................................................................................................ 51

FOOT AND HAND CONTROLS ......................................................................................................................... 52

INTELLIPANEL™ CONTROL ....................................................................................................59

INSTRUMENT PANEL ........................................................................................................................................ 59

LIQUID CRYSTAL DISPLAY (LCD) .................................................................................................................... 60

1. LCD initial setting....................................................................................................................................... 62

1.1 Setting the clock................................................................................................................................. 62

1.2 Setting the clock display ON/OFF ...................................................................................................... 63

1.3 Setting the working range of implement............................................................................................. 63

2. Setting the power shift transmission (Standard model) ............................................................................ 63

2.1 Setting the automatic gear shift (road mode) ..................................................................................... 63

2.2 Setting the automatic gear shift (field mode)...................................................................................... 64

3. Basic information monitor and performance monitor................................................................................. 66

3.1 Modifying the information displayed on the basic information monitor............................................... 70

3.2 Modifying the information to display on the performance monitor...................................................... 70

3.3 Measuring distance ............................................................................................................................ 71

INDICATORS ...................................................................................................................................................... 73

1. Indicator colour .......................................................................................................................................... 74

K-MONITOR MAIN MENU (PREMIUM AND PREMIUM KVT MODEL ONLY) .................................................. 74

1. Names of parts and their handling (K-monitor).......................................................................................... 75

2. Names of parts and their handling (K-monitor Pro) ................................................................................... 77

3. Basic procedures....................................................................................................................................... 79

3.1 Changing the screen settings............................................................................................................. 80

3.2 [F] buttons.......................................................................................................................................... 81

3.3 Function of the “Home” button ........................................................................................................... 81

3.4 Function of the [ESC] button.............................................................................................................. 81

4. System basic settings................................................................................................................................ 82

4.1 Calling up the setting screen (K-monitor)........................................................................................... 82

4.2 Calling up the setting screen (K-monitor Pro) .................................................................................... 82

4.3 Setting items and adjusting the setting mode screen......................................................................... 82

4.3.1 System settings (1) screen ........................................................................................................ 82

4.3.2 System settings (2) screen ........................................................................................................ 83

4.3.3 Time and date settings screen................................................................................................... 83

4.3.4 ISOBUS settings screen ............................................................................................................ 83

4.3.5 License confirmation screen ...................................................................................................... 84

5. Setting the 3-point hitch............................................................................................................................. 85

6. Setting the remote control valve ................................................................................................................ 87

6.1 Detailed settings of remote control valve ........................................................................................... 89

M7132, M7152, M7172

7. Setting the driveability ............................................................................................................................... 90

8. Setting the PTO ......................................................................................................................................... 92

9. Setting the engine and power shift transmission (Premium model only).................................................. 93

9.1 Setting the travelling speed gear in the road mode............................................................................ 94

9.2 Setting the travelling speed gear in the field mode ............................................................................ 94

9.3 Setting the auto shift sensitivity.......................................................................................................... 96

9.4 Setting the engine rev-limit................................................................................................................. 97

9.5 Setting the engine rpm memory ......................................................................................................... 97

10. Setting the engine and CVT (Premium KVT model only) ....................................................................... 98

10.1 Modifying the CVT sensitivity setting ............................................................................................... 99

10.2 Modifying the CVT response setting ................................................................................................ 99

10.3 Modifying the CVT low-range maximum speed setting.................................................................. 100

10.4 Cruise control speed setting........................................................................................................... 100

10.5 Setting the engine rev-limit............................................................................................................. 100

10.6 Setting the engine rpm memory ..................................................................................................... 100

11. Setting the headland management system............................................................................................ 101

11.1 Preparations for recording the program.......................................................................................... 101

11.2 Recording the program through actual tractor operation................................................................ 102

11.3 Pre-program lead time and pre-program travel distance................................................................ 102

11.4 Saving the program ........................................................................................................................ 103

11.5 Loading the program ...................................................................................................................... 104

11.6 Deleting the program ...................................................................................................................... 105

11.7 Modifying the program (lead time).................................................................................................. 105

11.8 Modifying the program (switching).................................................................................................. 106

11.9 Headland management system program list .................................................................................. 108

12. Operating conditions.............................................................................................................................. 113

12.1 Calling up the data screen and preparation ................................................................................... 113

12.2 Selecting and registering recorded data items............................................................................... 114

12.3 Recordable data items ................................................................................................................... 114

12.4 Setting the operating conditions and beginning recording ............................................................. 115

12.5 Record status indicators................................................................................................................. 115

K-MONITOR SUB-MENU (PREMIUM AND PREMIUM KVT MODELS ONLY) ............................................... 116

1. Live view camera..................................................................................................................................... 116

2. Calculator ................................................................................................................................................ 116

3. Initial setting............................................................................................................................................. 116

4. Data import and export ............................................................................................................................ 116

4.1 Exporting procedure......................................................................................................................... 116

4.2 Importing procedure ......................................................................................................................... 117

5. Screenshot .............................................................................................................................................. 117

6. Failure messages .................................................................................................................................... 118

PRE-OPERATION CHECK ......................................................................................................119

DAILY CHECK .................................................................................................................................................. 119

SERVICE INSPECT INDICATOR ..................................................................................................................... 119

1. Checking the items reaching the maintenance interval ........................................................................... 119

2. Resetting the maintenance hour.............................................................................................................. 121

OPERATING THE ENGINE .....................................................................................................122

EXHAUST AFTER-TREATMENT DEVICES..................................................................................................... 122

1. Dual exhaust after-treatment devices...................................................................................................... 122

DIESEL PARTICULATE FILTER (DPF) MUFFLER .......................................................................................... 122

1. Handling points........................................................................................................................................ 122

2. DPF regeneration process....................................................................................................................... 123

3. Operating procedure for auto regeneration mode ................................................................................... 124

3.1 PM warning level and required procedures...................................................................................... 125

4. Operating procedure for regeneration inhibit mode................................................................................. 126

4.1 PM warning level and required procedures...................................................................................... 127

5. Operating procedure for parked regeneration ......................................................................................... 128

M7132, M7152, M7172

6. Tips on diesel particulate filter (DPF) regeneration ................................................................................. 129

SELECTIVE CATALYTIC REDUCTION (SCR) MUFFLER............................................................................... 129

1. Outline of the SCR................................................................................................................................... 129

2. DEF/AdBlue®........................................................................................................................................... 129

3. Warning indication and countermeasures ............................................................................................... 130

3.1 SCR system inducement display on the LCD .................................................................................. 130

3.2 SCR system icon on inducement display......................................................................................... 130

3.3 SCR system inducement display and measures.............................................................................. 131

4. Storing and handling DEF/AdBlue®......................................................................................................... 134

STARTING THE ENGINE ................................................................................................................................. 134

1. Setting the battery switch ........................................................................................................................ 134

2. Engine starting procedure ....................................................................................................................... 134

3. Security setting for engine starting .......................................................................................................... 134

STARTING THE ENGINE IN COLD WEATHER............................................................................................... 135

1. Anti-frost heater for oil separator (if equipped) ........................................................................................ 135

2. Block heater (if equipped)........................................................................................................................ 135

3. Engine low temperature regulation.......................................................................................................... 135

4. DEF/AdBlue® freeze warning .................................................................................................................. 136

STOPPING THE ENGINE................................................................................................................................. 136

WARMING UP THE ENGINE ........................................................................................................................... 136

1. Warm-up and transmission fluid at low temperature range ..................................................................... 136

2. Transmission low temperature (premium KVT model only) ................................................................... 137

JUMP STARTING ............................................................................................................................................. 137

ENGINE OPERATION ...................................................................................................................................... 138

1. Key switch ............................................................................................................................................... 138

2. Engine power boost................................................................................................................................. 138

3. Rev-limiter control setting ........................................................................................................................ 138

4. RPM dual memory setting ....................................................................................................................... 139

4.1 Setting the speeds (Standard model).............................................................................................. 141

4.2 Setting the speeds (Premium and Premium KVT models) ............................................................ 141

4.3 Cancelling the setting (all models) ................................................................................................... 141

OPERATING THE TRACTOR..................................................................................................143

OPERATING NEW TRACTOR ......................................................................................................................... 143

1. Do not operate the tractor at full speed for the first 50 hours .................................................................. 143

2. Changing lubricating oil for new tractors ................................................................................................. 143

BOARDING AND LEAVING THE TRACTOR ................................................................................................... 143

OPERATOR’S POSITION CONTROLS............................................................................................................ 143

1. Operator’s seat ........................................................................................................................................ 143

2. Operator presence control (OPC) system ............................................................................................... 145

3. Seat belt .................................................................................................................................................. 145

4. Passenger seat (if equipped)................................................................................................................... 146

4.1 Precautions in using the passenger seat ......................................................................................... 146

5. Steering adjustment................................................................................................................................. 147

6. Extendable mirror .................................................................................................................................... 147

7. 2-sided mirror........................................................................................................................................... 147

8. Heater for rear view mirror (if equipped).................................................................................................. 147

9. Remote control mirror (if equipped)......................................................................................................... 148

LIGHT CONTROLS........................................................................................................................................... 148

1. Lights ....................................................................................................................................................... 148

1.1 Light switch (without repeat headlight type) ..................................................................................... 148

1.2 Light switch (with repeat headlight type) .......................................................................................... 149

2. Direction indicator switch and hazard light switch ................................................................................... 150

2.1 Horn button ...................................................................................................................................... 150

3. Work light switch...................................................................................................................................... 150

4. Beacon light switch.................................................................................................................................. 151

BRAKE CONTROLS......................................................................................................................................... 151

1. Foot brake ............................................................................................................................................... 151

M7132, M7152, M7172

1.1 4WD braking system (4WD model).................................................................................................. 152

1.2 Travelling speed limit (50 km/h model)............................................................................................. 152

2. Parking brake .......................................................................................................................................... 152

2.1 When towing a dual-line trailer brake type trailer ............................................................................. 153

3. Trailer brake............................................................................................................................................. 153

3.1 Confirmation..................................................................................................................................... 153

3.2 Dual-line hydraulic trailer brake........................................................................................................ 153

3.3 Single-line hydraulic trailer brake ..................................................................................................... 154

3.4 Dual-line pneumatic trailer brake ..................................................................................................... 154

3.4.1 Inspecting the pneumatic pressure.......................................................................................... 154

3.5 Trailer brake warning indicator ......................................................................................................... 155

4. Emergency brake (50 km/h model) ......................................................................................................... 155

5. Trailer brake test function (dual-line trailer brake model) ........................................................................ 155

TRAVEL CONTROLS ....................................................................................................................................... 156

1. Clutch pedal............................................................................................................................................. 156

2. Hand throttle ............................................................................................................................................ 156

3. Foot throttle ............................................................................................................................................. 156

4. Shuttle lever............................................................................................................................................. 157

5. Shuttle button .......................................................................................................................................... 157

6. Shuttle neutral button .............................................................................................................................. 158

7. Creep speed (if equipped) ....................................................................................................................... 158

8. 4WD and AUTO 4WD switch................................................................................................................... 159

8.1 Selection of 4WD modes.................................................................................................................. 159

8.2 Switching of 4WD modes ................................................................................................................. 159

8.3 4WD indicator................................................................................................................................... 160

8.4 Front-wheel drive usage................................................................................................................... 160

9. Differential lock ........................................................................................................................................ 161

9.1 Selection of differential lock modes.................................................................................................. 161

9.2 Switching of differential lock modes ................................................................................................. 161

9.3 Differential lock indicator .................................................................................................................. 162

POWER SHIFT TRANSMISSION CONTROL .................................................................................................. 162

1. Switching the operation modes ............................................................................................................... 163

2. Switching the auto shift modes................................................................................................................ 163

3. Travelling speeds..................................................................................................................................... 164

3.1 Setting the travelling speed gear in the road mode (Standard model)............................................ 164

3.2 Setting the main gear shift range in the field mode (Standard model) ............................................ 165

3.3 Setting the range gear shift in the field mode (Standard model)..................................................... 165

3.4 Setting the travelling speed range in the road mode (Premium model) .......................................... 166

3.5 Setting the main gear shift range in the field mode (Premium model) ............................................ 166

3.6 Setting the range gear shift in the field mode (Premium model) ..................................................... 167

4. Operating in the manual mode ................................................................................................................ 167

4.1 Operating the main gear shift........................................................................................................... 168

4.2 Operating the range gear shift ......................................................................................................... 168

5. Example of operation on combined auto shift and manual mode............................................................ 169

6. Setting the auto shift sensitivity ............................................................................................................... 169

7. Limp home switch.................................................................................................................................... 170

CONTINUOUSLY VARIABLE TRANSMISSION (CVT) CONTROL.................................................................. 171

1. Travelling operation ................................................................................................................................. 171

1.1 Main shift.......................................................................................................................................... 172

1.2 Mode shift......................................................................................................................................... 172

1.3 Modifying the maximum travelling speed ......................................................................................... 172

2. Operation of the automatic mode ............................................................................................................ 173

3. Operation of the manual engine speed setting mode.............................................................................. 174

4. Setting the continuously variable transmission (CVT) sensitivity ............................................................ 175

5. Setting the continuously variable transmission (CVT) response ............................................................. 176

6. Cruise control .......................................................................................................................................... 176

6.1 Setting the cruise control.................................................................................................................. 176

6.2 Clearing the cruise control ............................................................................................................... 177

M7132, M7152, M7172

7. Ratio lock button...................................................................................................................................... 177

8. Limp home switch.................................................................................................................................... 177

STOPPING THE TRACTOR ............................................................................................................................. 178

CHECK DURING DRIVING .............................................................................................................................. 178

1. Engine over-speed limiting indicator........................................................................................................ 178

2. Gear shifting warning indicator (Standard, Premium models only) ....................................................... 178

3. Easy checker™ ....................................................................................................................................... 179

4. Fuel gauge............................................................................................................................................... 180

5. DEF/AdBlue® gauge................................................................................................................................ 181

6. Pneumatic pressure gauge (if equipped)................................................................................................. 181

7. Coolant temperature gauge..................................................................................................................... 181

8. Tachometer.............................................................................................................................................. 182

9. Speedometer ........................................................................................................................................... 182

ENGINE START SECURITY FUNCTION ......................................................................................................... 182

1. Entering the password number................................................................................................................ 182

2. Setting “ON” and “OFF ” the engine start security function (“OFF” by default)........................................ 184

3. Changing the password number.............................................................................................................. 184

HEADLAND MANAGEMENT SYSTEM............................................................................................................ 185

1. Programming the headland management system................................................................................... 186

2. Loading a program to the program code ................................................................................................. 186

3. Handling the headland management system .......................................................................................... 186

FRONT SUSPENSION (IF EQUIPPED)........................................................................................................... 188

1. Front suspension modes ......................................................................................................................... 189

2. Switching of the modes ........................................................................................................................... 189

3. How to read the suspension indicator ..................................................................................................... 190

4. Travelling speed and modes.................................................................................................................... 190

PARKING THE TRACTOR................................................................................................................................ 190

1. Trailer operation....................................................................................................................................... 190

2. Chock block ............................................................................................................................................. 191

OPERATING TECHNIQUES............................................................................................................................. 191

1. Operating the tractor on a road ............................................................................................................... 191

2. Operating on slopes and rough terrain .................................................................................................... 191

3. Transporting the tractor safely ................................................................................................................. 192

4. Directions for use of power steering ........................................................................................................ 192

PTO ..........................................................................................................................................193

REAR PTO OPERATION.................................................................................................................................. 193

1. PTO clutch control switch ........................................................................................................................ 193

1.1 PTO clutch indicator......................................................................................................................... 193

1.2 PTO rpm display............................................................................................................................... 194

2. External switch for rear PTO.................................................................................................................... 194

3. PTO operating mode selector lever and PTO gear shift lever ................................................................. 194

4. 1000 rpm PTO shaft (if equipped) ........................................................................................................... 195

5. PTO shaft cover and shaft cap ................................................................................................................ 195

6. Auto PTO operation (Premium, Premium KVT models)........................................................................ 197

FRONT PTO OPERATION (IF EQUIPPED) ..................................................................................................... 198

1. PTO clutch control switch ........................................................................................................................ 198

1.1 PTO clutch indicator......................................................................................................................... 198

1.2 PTO rpm display............................................................................................................................... 199

2. PTO shaft cover and shaft cap ................................................................................................................ 199

3-POINT HITCH AND DRAWBAR...........................................................................................200

THE 3-POINT HITCH SETUP........................................................................................................................... 201

1. Adjusting lateral float ............................................................................................................................... 201

2. Selecting the top link mounting holes ...................................................................................................... 201

3. Drawbar ................................................................................................................................................... 202

4. Remote hitch up switch and down switch................................................................................................ 202

5. Lifting rod................................................................................................................................................. 202

M7132, M7152, M7172

6. Top link .................................................................................................................................................... 203

7. Stabiliser (if equipped)............................................................................................................................. 203

8. Automatic stabiliser (if equipped) ............................................................................................................ 203

9. Quick hitch (hook type)............................................................................................................................ 204

9.1 Installing ball-joint to implement ....................................................................................................... 204

9.2 Adjusting lower link width ................................................................................................................. 205

9.3 Attaching implement to tractor ......................................................................................................... 205

9.4 Detaching implement from tractor .................................................................................................... 205

9.5 Quick hitch locking device................................................................................................................ 205

TYPE A (HITCH MADE BY SCHARMÜLLER)................................................................................................. 206

1. Drawbar ................................................................................................................................................... 206

1.1 Swing drawbar ................................................................................................................................. 206

2. High-hitch ................................................................................................................................................ 206

2.1 Adjusting the high-hitch level ........................................................................................................... 207

2.2 High-hitch with automatic trailer coupling......................................................................................... 207

2.3 High-hitch with ball trailer coupling................................................................................................... 208

3. Piton-fix.................................................................................................................................................... 208

TYPE B (HITCH MADE BY DROMONE).......................................................................................................... 208

1. Auto hitch (push back type) ..................................................................................................................... 208

FRONT 3-POINT HITCH (IF EQUIPPED) ........................................................................................................ 210

1. Lift control ................................................................................................................................................ 210

2. Switching of the hydraulic valve .............................................................................................................. 211

3. Lower link ................................................................................................................................................ 211

4. Top link .................................................................................................................................................... 212

HYDRAULIC UNIT...................................................................................................................213

3-POINT HITCH CONTROL SYSTEM.............................................................................................................. 213

1. Terminology (Standard model) ............................................................................................................... 213

2. Terminology (Premium, Premium KVT models) .................................................................................... 214

3. 3-point hitch lock button........................................................................................................................... 215

4. Position and mix draft mode select.......................................................................................................... 215

5. Depth control adjustment dial .................................................................................................................. 216

6. Position control ........................................................................................................................................ 216

7. Mix draft control ....................................................................................................................................... 217

8. Float control............................................................................................................................................. 217

9. Lift arm top limit adjustment..................................................................................................................... 217

10. 3-point hitch lowering speed adjustment ............................................................................................... 218

11. 3-point quick raise and lower switches .................................................................................................. 218

12. 3-point hitch’s position lock.................................................................................................................... 219

13. Ride control ........................................................................................................................................... 220

AUXILIARY HYDRAULICS ............................................................................................................................... 220

1. Power-beyond type hydraulic outlet for Premium and Premium KVT models (if equipped).................. 220

2. Hydraulic drain port ................................................................................................................................. 221

REMOTE HYDRAULIC CONTROL SYSTEM................................................................................................... 221

1. Operation of Standard model ................................................................................................................. 221

1.1 Controls of remote valves ................................................................................................................ 221

1.2 Remote control valve ....................................................................................................................... 221

1.3 Flow control valve ............................................................................................................................ 222

1.4 Remote control valve lever............................................................................................................... 222

2. Operation of Premium and Premium KVT models ................................................................................ 223

2.1 Controls of remote valves ................................................................................................................ 223

2.2 Remote control valve lock button ..................................................................................................... 224

2.3 Detailed setting of remote control valve ........................................................................................... 224

2.4 Remote control valve switch ............................................................................................................ 225

2.5 Joystick for remote control valve and loader (loader model)............................................................ 225

2.6 Controls for the remote control valves on the rear fender (if equipped)........................................... 226

3. Common operation for all models............................................................................................................ 226

3.1 Connecting cylinder and hydraulic motor ......................................................................................... 226

M7132, M7152, M7172

3.2 Remote control valve coupler........................................................................................................... 227

3.3 Remote couplers spillage collector .................................................................................................. 228

4. Hydraulic control unit use reference chart ............................................................................................... 229

TYRES, WHEELS AND BALLAST..........................................................................................231

TYRES .............................................................................................................................................................. 231

1. Inflation pressure ..................................................................................................................................... 231

2. Jack point ................................................................................................................................................ 231

3. Safe replacement of the wheel ................................................................................................................ 232

4. Treads...................................................................................................................................................... 232

5. Adjusting the front wheel turning stopper bolt ......................................................................................... 233

WHEEL ADJUSTMENT .................................................................................................................................... 233

1. Adjusting wheels with bar type axle......................................................................................................... 234

DUAL TYRES (IF EQUIPPED) ......................................................................................................................... 235

1. Bar type axle............................................................................................................................................ 235

2. Flange type axle ...................................................................................................................................... 235

BALLAST .......................................................................................................................................................... 235

1. Front ballast............................................................................................................................................. 235

1.1 Front end weights (option) ............................................................................................................... 235

2. Rear ballast for single tyres ..................................................................................................................... 235

2.1 Rear wheel weights (option)............................................................................................................. 236

2.2 Liquid ballast in rear tyres ................................................................................................................ 236

2.3 Monolithic block (if equipped)........................................................................................................... 237

2.4 Maximum masses ............................................................................................................................ 237

CAB OPERATION....................................................................................................................238

CAB CLASSIFICATION AND MAINTENANCE................................................................................................. 238

DOORS AND WINDOWS ................................................................................................................................. 238

1. Locking and unlocking the door............................................................................................................... 238

2. Opening the door..................................................................................................................................... 238

3. Rear window............................................................................................................................................ 239

4. Sun roof ................................................................................................................................................... 239

5. Emergency exit........................................................................................................................................ 239

DOME LIGHT.................................................................................................................................................... 239

SPOT LIGHT..................................................................................................................................................... 240

WIPER .............................................................................................................................................................. 240

1. Front wiper and washer switch ................................................................................................................ 240

2. Rear wiper and washer switch................................................................................................................. 240

3. Using the wipers in cold season .............................................................................................................. 240

AIR CONDITIONER.......................................................................................................................................... 241

1. Airflow...................................................................................................................................................... 241

2. Air control vent......................................................................................................................................... 241

2.1 Dashboard air vent........................................................................................................................... 241

2.2 Rear air vent..................................................................................................................................... 242

3. Control panel ........................................................................................................................................... 242

3.1 Mode switch ..................................................................................................................................... 242

3.2 Temperature control dial................................................................................................................... 242

3.3 Blower switch ................................................................................................................................... 242

3.4 Air conditioner switch ....................................................................................................................... 242

3.5 Recirculation or fresh air selection switch ........................................................................................ 242

4. Operation................................................................................................................................................. 243

4.1 Heating............................................................................................................................................. 243

4.2 Cooling or dehumidifying-heating..................................................................................................... 243

4.3 Defrosting or demisting .................................................................................................................... 244

REAR DEMISTER WITH TIMER (IF EQUIPPED)............................................................................................ 244

ACCESSORIES ................................................................................................................................................ 245

1. Trailer electrical power socket ................................................................................................................. 245

2. ISOBUS socket (Premium and Premium KVT model only)................................................................... 246

M7132, M7152, M7172

3. Electrical power socket............................................................................................................................ 246

4. ISOBUS monitor socket (Premium and Premium KVT model only)...................................................... 247

5. Signal socket according to ISO standard 11786 (Premium and Premium KVT model only)................. 247

6. Cigarette lighter ....................................................................................................................................... 247

INSTALLING THE IMPLEMENT CONTROL BOX ............................................................................................ 248

BEACON LIGHT ............................................................................................................................................... 248

MAINTENANCE.......................................................................................................................249

SERVICE INTERVALS...................................................................................................................................... 249

MAINTENANCE ITEMS CHART....................................................................................................................... 250

LUBRICANTS, FUEL AND COOLANT ............................................................................................................. 252

PERIODIC SERVICE ...............................................................................................................254

WASTE DISPOSAL .......................................................................................................................................... 254

HOW TO OPEN THE BONNET........................................................................................................................ 254

1. Bonnet ..................................................................................................................................................... 254

2. Side cover................................................................................................................................................ 254

DAILY CHECK .................................................................................................................................................. 255

1. Walk around inspection ........................................................................................................................... 255

2. Checking and refuelling ........................................................................................................................... 255

3. Checking anti-frost heater for oil separator (if equipped) ........................................................................ 255

4. Checking DEF/AdBlue® level and adding fluid........................................................................................ 256

5. Checking pneumatic brake pressure (if equipped) .................................................................................. 257

6. Checking water separator........................................................................................................................ 257

7. Checking engine oil level......................................................................................................................... 258

8. Checking transmission fluid level ............................................................................................................ 258

9. Checking the coolant level....................................................................................................................... 258

10. Cleaning grill, radiator and cooler.......................................................................................................... 259

11. Checking DPF/SCR muffler ................................................................................................................... 260

12. Checking brake pedal............................................................................................................................ 260

13. Checking parking brake......................................................................................................................... 260

14. Checking gauges, meter and Easy Checker™...................................................................................... 261

15. Checking headlight, direction indicator light, hazard light, and so on.................................................... 261

16. Checking seat belt ................................................................................................................................. 261

17. Checking movable parts ........................................................................................................................ 261

INITIAL 5, 10, 25, AND 50 HOURS .................................................................................................................. 261

1. Tightening bar axle torque ....................................................................................................................... 261

INITIAL 50 HOURS........................................................................................................................................... 261

1. Changing engine oil................................................................................................................................. 261

2. Replacing engine oil filter ........................................................................................................................ 261

3. Checking fan belt..................................................................................................................................... 261

4. Replacing transmission oil filter ............................................................................................................... 261

EVERY 50 HOURS........................................................................................................................................... 261

1. Checking neutral circuit ........................................................................................................................... 261

1.1 Preparation before testing................................................................................................................ 262

1.2 Testing engine start system.............................................................................................................. 262

1.3 Testing transmission (neutral) control .............................................................................................. 262

1.4 Testing hydraulic up/down (lock) control .......................................................................................... 262

1.5 Testing remote hydraulic control (Premium, Premium KVT models) ............................................. 263

1.6 Testing external rear PTO switch control.......................................................................................... 263

1.7 Checking operator presence control (OPC) system......................................................................... 264

1.8 Testing operator presence control (OPC) system (Standard, Premium models) ........................... 265

1.9 Testing operator presence control (OPC) system (Premium KVT model) ...................................... 265

2. Checking wheel bolt torque ..................................................................................................................... 265

3. Checking tie-rod dust cover..................................................................................................................... 266

4. Checking air brake for trailer (if equipped) .............................................................................................. 266

EVERY 100 HOURS......................................................................................................................................... 266

1. Cleaning air cleaner primary element...................................................................................................... 266

M7132, M7152, M7172

1.1 Cleaning pre-cleaner tubes .............................................................................................................. 267

1.2 Replacing secondary element.......................................................................................................... 267

2. Lubricating grease fittings........................................................................................................................ 267

3. Adjusting brake pedal .............................................................................................................................. 269

3.1 Checking brake pedal free travel ..................................................................................................... 269

3.2 Checking brake pedal stroke............................................................................................................ 270

3.3 Checking equaliser working level (anti-imbalance device)............................................................... 270

4. Adjusting parking/secondary brake lever................................................................................................. 270

5. Checking battery condition ...................................................................................................................... 270

5.1 Charging the battery......................................................................................................................... 270

5.2 Directions for battery storage ........................................................................................................... 271

5.3 How to detach the battery ................................................................................................................ 271

6. Checking front PTO oil (if equipped)........................................................................................................ 272

EVERY 200 HOURS......................................................................................................................................... 272

1. Draining fuel tank water........................................................................................................................... 272

2. Adjusting toe-in........................................................................................................................................ 273

2.1 Adjusting toe-in procedure ............................................................................................................... 273

3. Cleaning inner air filter............................................................................................................................. 273

4. Cleaning fresh air filter............................................................................................................................. 273

4.1 Cleaning the filter ............................................................................................................................. 274

EVERY 400 HOURS......................................................................................................................................... 274

1. Checking fan belt tension ........................................................................................................................ 274

1.1 Replacing the belt ............................................................................................................................ 274

2. Cleaning water separator ........................................................................................................................ 275

3. Cleaning fuel solenoid pump element ..................................................................................................... 276

INITIAL 500 HOURS......................................................................................................................................... 276

1. Changing transmission fluid .................................................................................................................... 276

2. Changing rear axle case oil ..................................................................................................................... 276

3. Replacing transmission oil filter ............................................................................................................... 276

EVERY 500 HOURS......................................................................................................................................... 277

1. Changing engine oil................................................................................................................................. 277

2. Replacing engine oil filter ........................................................................................................................ 277

3. Cleaning pre-fuel filter ............................................................................................................................. 277

4. Replacing fuel filter .................................................................................................................................. 278

5. Replacing hydraulic oil filter (suction) ...................................................................................................... 278

6. Replacing hydraulic oil filter (return) ........................................................................................................ 280

7. Replacing power steering oil filter............................................................................................................ 280

8. Checking radiator hose and clamp .......................................................................................................... 281

8.1 Overheating countermeasures......................................................................................................... 282

9. Checking fuel line .................................................................................................................................... 282

10. Checking intake air line ......................................................................................................................... 283

11. Checking brake hose ............................................................................................................................. 283

12. Checking differential lock hose.............................................................................................................. 283

13. Checking lift cylinder hose..................................................................................................................... 283

14. Checking power steering line ................................................................................................................ 284

15. Checking the oil cooler line.................................................................................................................... 284

16. Checking front suspension hose ........................................................................................................... 284

17. Checking air conditioner pipe and hose ................................................................................................ 285

18. Checking air conditioner drive belt ........................................................................................................ 285

18.1 Replacing the belt .......................................................................................................................... 285

19. Changing front PTO oil (if equipped) ..................................................................................................... 285

EVERY 1000 HOURS....................................................................................................................................... 286

1. Changing transmission fluid .................................................................................................................... 286

2. Replacing transmission oil filter ............................................................................................................... 287

3. Changing rear axle case oil ..................................................................................................................... 288

4. Changing front differential case oil .......................................................................................................... 288

5. Changing front axle gear case oil ............................................................................................................ 289

6. Adjusting engine valve clearance ............................................................................................................ 289

M7132, M7152, M7172

EVERY 1000 HOURS OR 1 YEAR................................................................................................................... 289

1. Replacing air cleaner primary element and secondary element.............................................................. 289

2. Checking exhaust manifold ..................................................................................................................... 289

EVERY 1500 HOURS....................................................................................................................................... 289

1. Cleaning fuel injector nozzle tip............................................................................................................... 289

2. Checking DEF/AdBlue® injector tip ......................................................................................................... 289

3. Checking DEF/AdBlue® line .................................................................................................................... 289

4. Replacing oil separator element .............................................................................................................. 290

5. Checking positive crankcase ventilation (PCV) valve.............................................................................. 290

6. Checking and cleaning EGR cooler......................................................................................................... 290

7. Checking accumulator (front suspension type) ....................................................................................... 290

EVERY 2000 HOURS OR 2 YEARS ................................................................................................................ 290

1. Flushing cooling system and changing coolant ....................................................................................... 290

2. Antifreeze ................................................................................................................................................ 291

3. Replacing WABCO cartridge................................................................................................................... 292

EVERY 3000 HOURS....................................................................................................................................... 292

1. Checking turbocharger ............................................................................................................................ 292

2. Checking supply pump ............................................................................................................................ 292

3. Checking and cleaning EGR system ....................................................................................................... 292

4. Cleaning DPF muffler .............................................................................................................................. 292

5. Checking DEF/AdBlue® injector .............................................................................................................. 292

6. Replacing DEF/AdBlue® pump filter........................................................................................................ 292

EVERY 1 YEAR ................................................................................................................................................ 293

1. Checking DPF differential pressure sensor pipe ..................................................................................... 293

2. Checking EGR pipe ................................................................................................................................. 293

3. Checking oil separator hose .................................................................................................................... 293

4. Checking anti-frost heater for oil separator (if equipped) ........................................................................ 293

5. Checking CAB isolation cushion.............................................................................................................. 293

EVERY 2 YEARS.............................................................................................................................................. 293

1. Replacing DPF differential pressure sensor hose ................................................................................... 293

2. Replacing boost sensor hose .................................................................................................................. 293

EVERY 3 YEARS.............................................................................................................................................. 293

1. Replacing handbrake cable ..................................................................................................................... 293

EVERY 4 YEARS.............................................................................................................................................. 293

1. Replacing radiator hose (water pipes)..................................................................................................... 293

2. Replacing the fuel hose ........................................................................................................................... 293

3. Replacing intake air line .......................................................................................................................... 293

4. Replacing oil separator hose ................................................................................................................... 293

5. Replacing the oil cooler line..................................................................................................................... 293

6. Replacing power steering line ................................................................................................................. 294

7. Replacing lift cylinder hose...................................................................................................................... 294

8. Replacing suspension hose (front suspension type) ............................................................................... 294

9. Replacing differential lock hose............................................................................................................... 294

10. Replacing brake hose............................................................................................................................ 294

11. Replacing air conditioner hose............................................................................................................... 294

SERVICE AS REQUIRED................................................................................................................................. 294

1. Bleeding the fuel system ......................................................................................................................... 294

2. Bleeding brake system ............................................................................................................................ 294

3. Replacing fuses ....................................................................................................................................... 295

4. Replacing light bulb ................................................................................................................................. 298

5. Replacing head lamp............................................................................................................................... 298

6. Lubricating points for door and window ................................................................................................... 298

7. Adding washer liquid ............................................................................................................................... 298

8. Checking amount of refrigerant (gas) ...................................................................................................... 298

9. Washing the tractor.................................................................................................................................. 299

STORAGE................................................................................................................................301

TRACTOR STORAGE ...................................................................................................................................... 301

M7132, M7152, M7172

REMOVING THE TRACTOR FROM STORAGE.............................................................................................. 301

TROUBLESHOOTING.............................................................................................................302

ELECTRIC CONTROLLER TROUBLE SHOOTING......................................................................................... 302

OPTIONS .................................................................................................................................309

OPTIONS.......................................................................................................................................................... 309

APPENDICES ..........................................................................................................................310

MAXIMUM MASSES......................................................................................................................................... 310

1. Maximum permissible load of the tyre ..................................................................................................... 310

2. Trailer load capacity................................................................................................................................. 312

INDEX.......................................................................................................................................317

M7132, M7152, M7172

SAFE OPERATION

Careful operation is your best insurance against an

accident.

Read and understand this manual carefully before

operating the tractor.

All operators, no matter how much experience they

may have, should read this and other related manuals

before operating the tractor or any implement attached

to it. It is the owner's obligation to instruct all operators

in safe operation.

BEFORE OPERATING THE

TRACTOR

Know your equipment and its limitations. Read this

entire manual before attempting to start and operate

the tractor.

1. General

• Pay special attention to the safety labels on the

tractor.

• Do not operate the tractor or any implement

attached to it while under the influence of alcohol,

medication, controlled substances or while fatigued.

• Before allowing other people to use your tractor,

explain how to operate and have them read this

manual before operation.

• Never wear loose, torn, or bulky clothing around

tractor. It may catch on moving parts or controls,

leading to the risk of an accident.

Use additional safety items, such as a hard hat,

safety boots or shoes, eye and hearing protection,

gloves and so on, as appropriate or required.

• Do not allow passengers to ride on any part of the

tractor at any time. The operator must remain in the

tractor seat during operation.

• Check brakes, clutch, linkage pins and other

mechanical parts for improper adjustment and

wear. Replace worn or damaged parts promptly.

Check the tightness of all nuts and bolts regularly.

(See MAINTENANCE on page 249.)

• Keep your tractor clean. Dirt, grease, and rubbish

build up may contribute to fires and lead to personal

injury.

• Use only implements meeting the specifications

listed in this manual or implements approved by

KUBOTA. (See IMPLEMENT LIMITATIONS on

page 36.)

• Use proper weights on the front or rear of the

tractor to reduce the risk of upsets. When using the

front loader, put an implement or ballast on the 3-

point hitch to maintain proper balance and braking.

Follow the safe operating procedures specified in

the implement or attachment manual.

• The narrower the tread, the greater the risk of a

tractor upset. For maximum stability, adjust the

wheels to the widest practical tread width for your

application.

(See TYRES, WHEELS AND BALLAST on page

231.)

(1) Rear wheels (A) Tread width

• Do not modify the tractor. Unauthorised

modification may affect the function of the tractor,

which may result in personal injury.

2. CAB and ROPS

• KUBOTA recommends the use of a CAB or roll-

over protective structures (ROPS) and seat belt in

almost all applications. This combination will reduce

the risk of serious injury or death, should the tractor

be upset. Check for overhead clearance which may

interfere with a CAB or ROPS.

• If the CAB or ROPS is loosened or removed for any

reason, make sure that all parts are reinstalled

correctly before operating the tractor.

• Never modify or repair any structural member of a

CAB or ROPS because welding, bending, drilling,

grinding, or cutting may weaken the structure.

• If any structural member of the CAB or ROPS is

damaged, replace the entire structure at your local

KUBOTA Dealer.

• Always use the seat belt if the tractor has a CAB or

ROPS. Do not use the seat belt if there is no

ROPS. Check the seat belt regularly and replace if

frayed or damaged.

SAFE OPERATION

M7132, M7152, M7172

(1) CAB

(2) Seat belt

• The CAB is not tested for falling object protection

structure (FOPS).

• The CAB fulfils the requirements of safety level 2

for hazardous substances.

• The CAB provides protection against dust but not

against aerosols and vapours.

• The CAB cannot be used under conditions requiring

protection against aerosols and vapours.

OPERATING THE TRACTOR

Operator safety is a priority. Safe operation, specifically

with respect to overturning hazards, entails

understanding the equipment and environmental

conditions at the time of use.

Some prohibited uses which can affect overturning

hazards include travelling and turning with implements,

loads carried too high and so on. This manual sets forth

some of the obvious risks, but the list is not, and cannot

be, exhaustive. It is the operator's responsibility to be

alert for any equipment or environmental condition that

could compromise safe operation.

1. Starting to operate the tractor

• Always sit in the operator’s seat when starting

engine or operating levers or controls. Adjust seat

per instructions in the operating the tractor section.

Never start engine while standing on the ground.

• Before starting the engine, make sure that all levers

(including auxiliary control levers) are in their

neutral positions and that the parking brake is

engaged. Fasten the seat belt if the tractor has a

CAB, a fixed ROPS or a foldable ROPS in the

upright and locked position.

• Do not start engine by shorting across starter

terminals or bypassing the safety start switch. The

machine may start in gear and move if the normal

starting circuitry is bypassed.

• Do not operate or idle the engine in a non-

ventilated area. Carbon monoxide gas is colourless,

odourless, and deadly.

• Check before each use that the operator presence

controls (OPC) are functioning correctly.

Test the safety systems.

(See Checking neutral circuit on page 261.)

Do not operate unless they are functioning

correctly.

2. Working the tractor

• Pull only from the hitch devices. Never hitch to axle

housing or any other point except the drawbar;

such arrangements will increase the risk of serious

personal injury or death due to a tractor upset.

(1) Drawbar

(2) High-hitch

• For trailing PTO-driven implements, set the hitch

devices to the towing position.

• Attach pulled or towed loads to the hitch devices

only.

• Keep all shields and guards in place. Replace any

that are missing or damaged.

• Avoid sudden starts. To avoid upsets, slow down

when turning, on uneven ground, and before

stopping.

• The tractor cannot turn with the differential locked

and attempting to do so could be dangerous.

• Do not operate near ditches, holes, embankments,

or other ground surface features which may

collapse under the tractor’s weight. The risk of

tractor upset is even higher when the ground is

loose or wet. Tall grass can hide obstacles; walk the

area first to be sure.

• Watch where you are going at all times. Watch for

and avoid obstacles. Be alert at row ends, near

trees, and other obstructions.

• When working in groups, always let the others

know what you are going to do before you do it.

• Never try to get on or off a moving tractor.

• Always sit in the operator’s seat when operating

levers or controls.

• Do not stand between tractor and implement or

trailed vehicle unless the parking brake is applied.

• Never utilise the headband management system, if

anyone is in the work area of the tractor.

SAFE OPERATION

M7132, M7152, M7172

Other manuals for M7-132

This manual suits for next models

Table of contents

Other Kubota Tractor manuals

Kubota

Kubota WSM L3540-II Instruction manual

Kubota

Kubota LX2610 User manual

Kubota

Kubota BX2360 User manual

Kubota

Kubota WSM B2050 Instruction manual

Kubota

Kubota M6040 User manual

Kubota

Kubota L3540 Instruction manual

Kubota

Kubota M5040 Instruction manual

Kubota

Kubota WSM BX1870 Instruction manual

Kubota

Kubota M5L-111 User manual

Kubota

Kubota L45 Original instructions

Kubota

Kubota M108S User manual

Kubota

Kubota RT210 User manual

Kubota

Kubota B2620 User manual

Kubota

Kubota M6800S Instruction manual

Kubota

Kubota M6-101-M6-111 User manual

Kubota

Kubota Power Krawler M8540 NARROW Instruction manual

Kubota

Kubota BX80 User manual

Kubota

Kubota B2920 User manual

Kubota

Kubota B3150 User manual

Kubota

Kubota B7200HST 4WD Instruction manual

Kubota

Kubota WSM B1830 Instruction manual

Kubota

Kubota B2630 User manual

Kubota

Kubota BX Series User manual

Kubota

Kubota M5640SU Instruction manual

Popular Tractor manuals by other brands

Toro

Toro 260 series Setup instructions

Branson

Branson 00 Series Operator's manual

Taylor-Dunn

Taylor-Dunn Tiger TC-030-60 Operation, Maintenance, and Replacement Parts Manual

Simplicity

Simplicity Lecacy parts manual

Case IH

Case IH Steiger 350 Service manual

Ariens

Ariens 935269 42" Gear Tractor Operator's manual

AGCO

AGCO FENDT 900 Workshop service manual

Hayter

Hayter RS82 Spare parts manual

New Holland

New Holland Boomer 20 Service manual

AGCO

AGCO MASSEY FERGUSON MF 7600 maintenance

Briggs & Stratton

Briggs & Stratton 2690816 Setup instructions

Agria

Agria 3900 operating instructions

Husqvarna

Husqvarna TF545P Operator's manual

Simplicity

Simplicity 5216 Operator's manual

Cushman

Cushman AC TUG Service & parts manual

New Holland

New Holland T4.55S Service manual

Mitsubishi

Mitsubishi MT160 Repair manual

New Holland

New Holland TK4020F Service manual