Kurgo back seat BARRIER User manual

OR
Attaching the barrier: Detachable Headrests
1. Orient the barrier so the
Kurgo logo is facing the
back of the car. Remove the
driver’s seat headrest. Slide
the inner headrest column
through the large D-ring
attached to strap (A). Slide
outer D-ring (B)
through
outer headrest post. Repeat
on passenger side.
2. OPTION A - Clip hook (C)
to the underside of the front
seat base plate or springs.
OPTION B - Run strap (F)
around the outside footing
of each seat and secure
hook (C).
3. Pull top straps (D) tight
on both sides; pull both
bottom straps (F) tight.
Passenger Seat
Center Console
View from backseat
INSTALLED VIEW
Cup Holder
Pockets
Optional extra support for barrier extension:
Flip up orange velcro (G) and slide metal rod (H) through
slot (I) that runs across the top of the barrier between
the vertical bar pockets (J). Close and secure velcro (G).
To lower barrier extension:
1) Open velcro (G) on the left and right side, and remove
the metal bar found in each slot (J), also remove metal rod (H).
2) Roll mesh top from bar slot (I) down and tuck fabric
into large black pocket
Parts List & Key:
Ainner D-ring
Bouter D-ring
Cunder seat hook
Dtop headrest strap
Etop tension buckle
Funder seat strap
Gsteel support velcro closure
Hhorizontal steel support rod
Isteel support rod pocket
Jvertical steel support bar pocket
kurgo.com/product-instructions
2-15
Instructions and care

Fixed Headrests
1. Pull top headrest strap
(D) out of its buckle (E).
2. Wrap strap (D) around the headrest. Insert strap
through the large D-ring (A) attached to the inner elastic
strap. Bring the strap back around the headrest and
run through (E). Repeat on opposite headrest.
CONTINUE FROM STEP TWO
OF THE DETACHABLE
HEADREST INSTRUCTIONS
Passenger Seat
Center Console
View from backseat
INSTALLED VIEW
Cup Holder
Pockets
TRAINING:
1) Get your dog familiar with riding in the car, focusing
on the back seats and not the front. Before setting out
on a long road trip with this new product, take some
shorter trips to help Fido become adjusted to the barrier.
2) Most importantly, the understanding of basic
obedience really makes the difference for any car ride.
Make sure your pup has a grasp of sit, stay and come to
help create easy going excursions.
Parts List & Key:
Ainner D-ring
Bouter D-ring
Cunder seat hook
Dtop headrest strap
Etop tension buckle
Funder seat strap
Gsteel support velcro closure
Hhorizontal steel support rod
Isteel support rod pocket
Jvertical steel support bar pocket
Our product cleaning instructions will help ensure that your gear has a long, exciting life. Washing by hand and hang
air-drying is the best way to care for your Kurgo products.
Hand Wash Instructions
1. Brush off loose dirt with a dry brush.
2. Spot clean with a damp sponge, cold water, and mild soap. Avoid harsh detergents.
3. If necessary, rinse larger area to eliminate excess soap residue.
4. Hang to air dry (do not machine dry).
Cleaning Instructions
NOTICE: Please contact Kurgo directly with any product or return inquiries.
Kurgo Products • 2D Fanaras Drive, Salisbury, MA 01952 •877-847-3868 •www.kurgo.com •[email protected]