KWIK GOAL 10B5303 User manual

NZ295 Rev. 03/25/11
ASSEMBLY INSTRUCTIONS FOR 10B5303 BOX ANCHOR
1. Unpack all parts and check for damage that may have occurred during shipping. If damage has occurred,
notify trucking company immediately. Lay out all parts. Remove all cardboard and packaging immediately.
Wet or damp packaging may damage contents.
2. Read through entire instruction before beginning assembly and installation.
Box Anchor (2)
(Part# VZ581)
Cable Lanyard X 6 1/4” (2)
(Part# VZ583)
Padlock with Keys (2)
(Part# VZ563)
Cable Lanyard X 36” (2)
(Part# VZ588)
Auger Piling (2)
(Part# VZ589)
140 Pacific Drive Quakertown, PA 18951
(P) 215-536-2200 / (P) 800-531-4252 / (F) 215-536-4309 / (F) 800-778-8869
Visit our website @ kwikgoal.com
2011 Kwik Goal Ltd.
All Kwik Goal products carry a Lifetime Guarantee. For help with
guarantee issues, visit kwikgoal.com and click on the Lifetime
Guarantee logo or contact customer service at 1-800-531-4252.
Hex Driver (1)
(Part# VZ140)
Parts
NOTE: Two anchors secures one full size soccer goal in most soils. Each anchor is rated at 500 lbs. when
installed properly.
6- 1/4”
36”
Hardware
3/8” X 1-1/4” Socket Head (2)
3/8” Flat Washer - Steel (Part# TZ189) (2)
3/8” Flat Washer - Polyurethane (Part# TZ328) (2)
(Part# TZ324)
***CAUTION***
All sports equipment must be anchored at all times. Sports equipment not in use must be
disassembled and stored in a safe, secure place. Assembled sports equipment should not be left
unattended. Do not use this equipment during the threat of high winds. Sports equipment should
be checked for safety on a regular basis. Any modifications to this or any Kwik Goal product will
void any and all warranties.

Lug Wrench 1-1/4”
Ratchet with
1-1/4” Socket
OR
OR
Assembly Tools
3. Set goal in desired area and mark 2 auger piling locations. Screw auger piling into field surface using a 1-1/4”
wrench.
4. Using box anchor as a guide, screw auger piling until top
of box anchor is flush with top of the field surface.
3“
33“
Auger Piling
Auger Piling Detail View
Field
Box Anchor
Surface
6“ Max.
NZ295 Rev. 03/25/11
Auger Piling
Field Surface
Box Anchor T Wrench
(Part# 10B5303T)
Overhead View
Auger Piling
Location
Center of Goal Line
Playing Field
Goal Line
Goal Frame
6“ Max. 6“ Max.
30“ Min. 30“ Min.
***CAUTION***
All sports equipment must be anchored at all times. Sports equipment not in use must be
disassembled and stored in a safe, secure place. Assembled sports equipment should not be left
unattended. Do not use this equipment during the threat of high winds. Sports equipment should
be checked for safety on a regular basis. Any modifications to this or any Kwik Goal product will
void any and all warranties.

NZ295 Rev. 03/25/11
5. After auger piling is at the correct depth, remove plastic plug from threaded hole in auger piling. Attach
box anchor to the auger piling using hex driver. Torque bolt to 60 in-lbs.
Note: Keep open end of box anchor and cable lanyard toward goal.
6. When box anchor is secured to auger piling, close lid and back fill around box anchor. To anchor goal,
make sure cable lanyard X 6-1/4” is out of box anchor as shown. Wrap cable lanyard X 36” around back
rail of goal and secure to cable lanyard X 6-1/4” with padlock.
Auger Piling
Box Anchor
Cable Lanyard X 6-1/4”
3/8” Flat Washer - Steel
3/8” X 1 -1/4” Socket Head
Hex Driver
(NOTE: Opening Toward Back Rail)
Cable Lanyard X 6-1/4”
Assembled Box Anchor
(NOTE: Opening Toward Back Rail)
Box Anchor
Auger Piling
Back Rail
***CAUTION***
All sports equipment must be anchored at all times. Sports equipment not in use must be
disassembled and stored in a safe, secure place. Assembled sports equipment should not be left
unattended. Do not use this equipment during the threat of high winds. Sports equipment should
be checked for safety on a regular basis. Any modifications to this or any Kwik Goal product will
void any and all warranties.
Back Rail
Auger Piling
Box Anchor
Cable Lanyard X 6-1/4”
Padlock
Cable Lanyard X 36”
Cable Lanyard X 36”
Auger Piling
Box Anchor
Back Rail
Padlock
3/8” Flat Washer
Polyurethane
(NOTE: Toward Back Rail)
(NOTE: Toward Back Rail)

***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT
ALL TIMES and shall be secured against tilting. Do not climb on the net or goal framework at anytime!
All fastenings must be checked to insure they are fully tightened before and after each use of this
product. Goal posts not in use must be disassembled and properly stored in a safe, secure area. (See
Guidelines for Moveable Soccer Goal Safety, included.) Assembled goal posts should not be left
unattended. Remove nets when goals are not in use. Do not use this equipment during the threat of
high winds. Goal posts should be checked for safety before and after each use. All warning and safety
labels included with this product must be visible at all times. Any modifications to this or any Kwik Goal
product will void any and all warranties.
NZ295 Rev. 03/25/11
7. Test as described below to prove soil conditions are acceptable for use.

Padlock
Cable Lanyard X 36”
***CAUTION***
All sports equipment must be anchored at all times. Sports equipment not in use must be
disassembled and stored in a safe, secure place. Assembled sports equipment should not be left
unattended. Do not use this equipment during the threat of high winds. Sports equipment should
be checked for safety on a regular basis. Any modifications to this or any Kwik Goal product will
void any and all warranties.
8. When removing goal, make sure cable lanyard X 6-1/4”
is safely stored in box anchor as shown and the lid is
completely closed.
10.Use cable lanyard X 36” and padlock to keep secured.
Lock goals face to face or against a permanent
structure whenever they are disconnected from
ground anchors. This helps prevent goal tip over
accidents.
Padlock
Cable Lanyard X 36”
NZ295 Rev. 03/25/11
9. Visually inspect condition of cable
lanyards at least once a month.
Replace cables lanyards at any
indication of damage.