KWIK GOAL 2B2 User manual

All Kwik Goal products carry a Lifetime Guarantee. For help with
guarantee issues, visit kwikgoal.com and click on the Lifetime
Guarantee logo or contact customer service at 1-800-531-4252.
NZ73 Rev. 01/13/11
140 Pacific Drive Quakertown, PA 18951
(P) 215-536-2200 / (P) 800-531-4252 / (F) 215-536-4309 / (F) 800-778-8869
Visit our website @ kwikgoal.com
2007, Rev. 2011 Kwik Goal Ltd.
Base (2)
(Part# UZ527)
Post (2)
(Part# UZ510)
Rail w/o swage (2)
(Part# UZ493)
Rail w/ swage (2)
(Part# UZ509)
ASSEMBLY INSTRUCTIONS FOR 2B2 PORTABLE FUTSAL SOCCER GOAL
1. Unpack all parts and check for damage that may have occurred during shipping. If damage has occurred,
notify trucking company immediately. Lay out all parts. Remove all cardboard and packaging immediately.
Wet or damp packaging may damage contents.
2. Read through entire instruction before beginning assembly and installation.
3. If goal is to be used in a portable application continue to step 4. If goal is to be used in a more permanent
application skip steps 4 through 6 and begin assembly with step 7.
Net (1)
(Part# 3B1)
Net Fastener (1)
(Part# VZ229)
Ground Anchor (4)
(Part# TZ150)
Rubber Pad (5)
(Part# VZ188)

NZ73 Rev. 01/13/11
5. Attach net to goal using net fastener, provided. Be sure to cut
net fastener into 9”-10” pieces to ensure 2” overlap.
6. Use ground anchors to fasten goal to playing field as
shown.
PUSH
Net
Fastener
Top Corner
Tag
Net
Fastener
Rail
w/ swage
Rail
w/o swage
Post
Base
Post
Base
4. Assemble rails, bases and posts as shown.
Rail
w/o swage
Rail
w/ swage
Ground
Anchor
Ground
Anchor
Ground
Anchor Ground
Anchor
Rail
w/ swage
NOTE FOR INDOOR USE: Rubber pads can be added to
bottom of goal by peeling off paper to expose
adhesive. Place rubber pads on post and rails at
locations shown.
Rubber
Pad
Post
Rail
w/o swage
Rubber Pad
Rubber Pad
Rubber Pad

NZ73 Rev. 01/13/11
7. Assemble rails, base and post as shown.
8. Weave assembled parts onto net as shown. Be sure to
note the location of the top corner net tag.
Top Corner
Net Tag
9. Connect rails, posts and bases as shown.
Top Corner
Net Tag
Rail
w/ swage
Post
Base
Rail
w/o swage
Net
Post
Post
Base
Base
Rail
w/ swage
Rail
w/o swage
Rail
w/ swage
Rail
w/o swage
Post
Rail
w/ swage
Base
Rail
w/o swage
PUSH

NZ73 Rev. 01/13/11
10. Weave base through net and attach to rail
as shown.
12. Repeat step 10 and 11 to attach net to opposite side of
goal.
13. Use ground anchors to fasten goal to playing field.
11. Disconnect post from goal and
weave through net as shown.
Reconnect post to base and rails as
shown.
Ground
Anchor
Ground
Anchor
Ground
Anchor Ground
Anchor
Base
Post
Base
Post
Post
Base
Rail
w/ swage
Rail
w/o swage
Rail
w/ swage
Rail
w/o swage
Rail
w/ swage
Rail
w/o swage
NOTE FOR INDOOR USE: Rubber
pads can be added to bottom of
goal by peeling off paper to expose
adhesive. Place rubber pads on post
and rails at locations shown.
Rubber
Pad
Post
Rail
w/o swage
Rail
w/ swage
Rubber Pad
Rubber Pad
Rubber Pad