KWIK GOAL FUSION 120 GOAL User manual

NZ252 Rev. 09/11/18
86”
Base (2)
(Part# UZ1290)
84”
Right Post (1)
(Part# UZ1273)
280”
Crossbar (1)
(Part# UZ987)
84”
Date of
manufacture
sticker
Left Post (1)
(Part# UZ1276)
140 Pacific Drive Quakertown, PA 18951
(P) 215-536-2200 / (P) 800-531-4252 / (F) 215-536-4309 / (F) 800-778-8869
Visit our website @ kwikgoal.com
2006, Rev. 2018 Kwik Goal Ltd.
280”
Back Bottom Bar (1)
(Part# UZ966)
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties.
ASSEMBLY INSTRUCTIONS FOR 2B3906 FUSION 120 GOAL
1. Unpack all parts and check for damage that may have occurred during shipping. If damage has occurred,
notify Kwik Goal immediately. Lay out all parts. Remove all cardboard and packaging immediately. Wet or
damp packaging may damage contents.
2. Read through entire instruction before beginning assembly and installation.
NOTE: Components may be packaged in one or more additional boxes.
®

140 Pacific Drive Quakertown, PA 18951
(P) 215-536-2200 / (P) 800-531-4252 / (F) 215-536-4309 / (F) 800-778-8869
Visit our website @ kwikgoal.com
1998 rev 2009 Kwik Goal Ltd.
IMPORTANT GOAL SAFETY INSTRUCTIONS
READ CAREFULLY
1. Check for structural integrity and proper connecting hardware before every
use. Replace damaged or missing parts or fasteners immediately.
2. Safety/Warning labels must be clearly visible.
3. Securely anchor moveable soccer goals at ALL times.
4. Always instruct players, managers, coaches, trainers, teachers, maintenance
workers and all other personnel who might come in contact with the goal,
on the safe handling of and potential dangers associated with moveable
soccer goals.
5. Always exercise extreme caution when moving goals and provide adequate
manpower to move goals of varied sizes and weights. Moveable soccer goals
should only be moved by authorized personnel.
6. NEVER allow anyone to climb on the net or goal framework.
7. Moveable soccer goals should only be used on LEVEL fields, NEVER on a
slope or hill area.
8. Remove nets when goals are not in use.
9. Most of the tip-over injuries occurred when goals were unattended. Anchor
or chain one goal to another or to nearby fence posts, dugouts, or any other
similar sturdy fixture when not in use. If this is not practical, store moveable
soccer goals in a place where children cannot have access to them.
10. Fully disassemble goals for seasonal storage.
NZ252 Rev. 09/11/18

Hardware
Note: Hardware may be packaged separately
in one or more boxes. Open all packages
before beginning assembly.
3/8“ x 1-3/4” Hex Bolt (Part# TZ227) (26)
3/8" x 7/8" Hex Bolt (Part# TZ249) (12)
3/8“ Lock Washer (Part# TZ65) (34)
3/8“ Flat Washer (Part# TZ60) (38)
3/8” Lock Nut (Part# TZ197) (4)
3/8" Square Nut (Part# TZ247) (12)
5/16" Eyebolt (Part# TZ270) (2)
5/16" Flat Washer (Part# TZ269) (2)
5/16” Lock Nut (Part# TZ5) (2)
7/16” x 5 1/2” Bolt Hex (Part# TZ291) (4)
7/16" Flat Washer (Part# TZ171) (8)
7/16” Lock Nut (Part# TZ47) (4)
Backstay Brace (2)
(Part# VZ328P2)
Channel Spacer (10)
(Part# UZ812)
Post Brace (2)
(Part# 10B6201 Pack of 2)
Post Corner (2)
(Part# UZ998)
Crossbar Corner (2)
(Part# UZ989)
Backstay (2)
(Part# VZ328P1)
Net Strap (1)
(Part# 10B4406)
Assembly Tools
9/16
1/2”, 9/16”, 5/8”
& 3/4” Wrenches
Ratchet with
1/2”, 9/16”, 5/8”
& 3/4” Sockets
Scissors
AND
Back Bottom Bar
Connector (2)
(Part# UZ1033)
Chain (4)
w/ Snap Link & Anchor Plate
(Part# UZ846 )
Net (1)
(Part# 3B5921)
Base Cap (2)
(Part# UZ1035)
Anchor Bag (6)
(Part# 10B1605)
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties.
Net Clip (80)
(Part# 10B3101 Pack of 100)
Ground Anchor (4)
(Part# 10B101 Pack of 4)
NZ252 Rev. 09/11/18

3. Insert two 3/8” square nuts and optional wheel hardware
in each base. Assemble bases and corners. Press joints
together firmly before tightening bolts.
Base
Corner
Counter Balance Weight
pre-installed in this end
DO NOT REMOVE
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties.
Base
Post
Corner
3/8” x 1-3/4”
Hex Bolt
3/8” Lock Washer
3/8” Flat Washer
Channel Spacer
(plastic)
Threaded Channel
Spacers (metal)
For use with #10B409
wheel option only
3/8” Square Nut
NZ252 Rev. 09/11/18

4. Assemble back bottom bar, bases and back bottom
bar connectors. Press joints together firmly before
tightening bolts.
Base
Base
Back Bottom
Bar Connector
Back Bottom Bar
Stickers face
outside of goal
Back Bottom Bar
Connector
Channel Spacer
(plastic)
Base
7/16” Flat Washer
7/16” Lock Nut
3/8” X 1-3/4” Hex Bolt
Back Bottom Bar
Back Bottom Bar Connector
7/16” X 5-1/2”
Hex Bolt
3/8” Lock Washer
3/8” Flat Washer
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties.
NZ252 Rev. 09/11/18

5. Assemble crossbar, posts, and corners. Note direction of stickers on crossbar and posts. Press joints together
firmly before tightening bolts. Tighten all bolts. Note: Square nuts will float loose until step 7.
Crossbar
Right Post
Left Post
Stickers face
outside of goal
Stickers face
outside of goal
Date of manufacture sticker
3/8" x 1-3/4" Hex Bolt
3/8" Lock Washer
3/8" Flat Washer
Channel Spacer
(plastic)
Crossbar Corner
Crossbar
3/8" Square Nut
3/8" Square Nut
Post
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties.
NZ252 Rev. 09/11/18

6. Attach backstays and backstay braces.
3/8" Lock Nut
Crossbar
Right
Post
3/8" Flat Washer
5/16" Eyebolt
Backstay
3/8" Flat Washer
3/8" Lock Washer
3/8" x 7/8" Hex Bolt
3/8" x 1-3/4"
Hex Bolt
5/16" Lock Nut
5/16" Flat Washer
3/8" Square Nut
Backstay
Brace
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties.
NZ252 Rev. 09/11/18

Back Bottom Bar
Base
Base
Left Post
Right Post
Crossbar
Backstay
Backstay
7. Lift assembled posts and insert into assembled
bases. Be sure connections are pressed firmly
Lift
3/8" x 1-3/4"
Hex Bolt
3/8" Lock Washer
3/8" Flat Washer
Channel Spacer
(plastic)
Base
Left or Right Post
3/8” Square Nut
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties.
NZ252 Rev. 09/11/18

8. Attach two post braces. Attach base cap
and anchor plate on to the rear of each
base.
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties.
3/8” Flat Washer
First 3/8”
Square Nut
Second
3/8” Square Nut
for anchor plate
3/8” Lock Washer
3/8” Lock
Washer
3/8” Flat
Washer
3/8” X 7/8”
Hex Bolt
Post Brace
3/8” X 7/8” Hex Bolt
This side of Anchor Plate
to the outside of goal.
3/8” Lock Washer
3/8” Flat Washer
3/8” X 1-3/4”
Hex Bolt
Anchor Plate
Base Cap
Threaded
Channel Spacer
NZ252 Rev. 09/11/18

9. Attach anchor plate to front of each base. Attach chain leashes to all four
anchor plates.
Assembled
60"
3/8" Flat Washer
3/8" Lock Washer
3/8" x 7/8" Hex Bolt
Chain Leash
3/8" Square Nut
Anchor
Plate
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties.
NZ252 Rev. 09/11/18