KYLAND Ruby3A Assembly instructions

Ruby3A Industrial Ethernet Switch
Hardware Installation Manual
Publication Data: Oct. 2017
Version: V1.0
No.：112023101

Ruby3A Industrial Ethernet Switch
Hardware Installation Manual
Disclaimer: Kyland Technology Co., Ltd. tries to keep the content of this manual as
accurate and as updated as possible. This document is not guaranteed to be error-free, and
we reserve the right to amend it without notice to users.
All rights reserved.
No part of this documentation may be excerpted, reproduced, translated, annotated or
duplicated, in any form or by any means without the prior written permission of KYLAND
Corporation.
Copyright © 2017 Kyland Technology Co., Ltd.

Notice for Safety Operation
The product performs reliably as long as it is used according to the guidance. Artificial
damage or destruction of the device should be avoided. Before using the device, read this
manual carefully for personal and equipment safety. Please keep the manual for further
reference. Kyland is not liable to any personal or equipment damage caused by violation of
this notice.
Do not place the device near water sources or damp areas. Keep the ambient relative
humidity within the range from 5% to 95% (non-condensing).
Do not place the device in an environment with high magnetic field, strong shock, or high
temperature. Keep the working and storage temperatures within the allowed range.
Install and place the device securely and firmly.
Please keep the device clean; if necessary, wipe it with a soft cotton cloth.
Do not place any irrelevant materials on the device or cables. Ensure adequate heat
dissipation and tidy cable layout without knots.
Wear antistatic gloves or take other protective measures when operating the device.
Avoid any exposed metal wires because they may be oxidized or electrified.
Install the device in accordance with related national and local regulations.
Before power-on, make sure the power supply is within the allowed range of the device.
High voltage may damage the device.
Power connectors and other connectors should be firmly interconnected.
Do not plug in or out the power supply with wet hands. When the device is powered on,
do not touch the device or any parts with wet hands.
Before operating a device connected to a power cable, remove all jewelry (such as rings,
bracelets, watches, and necklaces) or any other metal objects, because they may cause
electric shock or burns.
Do not operate the device or connect or disconnect cables during an electrical storm.
Use compatible connectors and cables. If you are not sure, contact our sales or
technical support personnel for confirmation.

Do not disassemble the device by yourself. When an anomaly occurs, contact our sales
or technical support personnel.
If any part is lost, contact our sales or technical support personnel to purchase the
substitute. Do not purchase parts from other channels.
Dispose of the device in accordance with relevant national provisions, preventing
environmental pollution.
In the following cases, please immediately shut down your power supply and contact your
Kyland representative:
Water gets into the equipment.
Equipment damage or shell damage.
Equipment operation or performance has abnormally changed.
The equipment emits odor, smoke or abnormal noise.

I
Contents
1 Product Overview...............................................................................................................1
2 Structure and Interface.......................................................................................................2
2.1 Front Panel ..................................................................................................................2
2.2 Top Panel.....................................................................................................................3
3 Mounting.............................................................................................................................5
3.1 Dimension Drawing......................................................................................................5
3.2 Mounting Modes and Steps .........................................................................................6
3.2.1 DIN-Rail Mounting.................................................................................................6
3.2.2 Panel Mounting......................................................................................................8
4 Connection .......................................................................................................................11
4.1 10/100/1000Base-T(X) Ethernet Port.........................................................................11
4.2 1000LX/SX 10/100/1000Base-T(X) SFP slot .............................................................12
4.2.1 SFP Optical Module.............................................................................................13
4.2.2 SFP Electrical Module .........................................................................................14
4.3 1000LX/SX 10/100/1000Base-T(X) Combo Port........................................................15
4.4 Console Port ..............................................................................................................15
4.5 Grounding..................................................................................................................16
4.6 Power Terminal Block................................................................................................17
4.7 Alarm Terminal Block.................................................................................................19
5 Reset................................................................................................................................21
6 LEDs.................................................................................................................................22
7 Switch Access ..................................................................................................................23
7.1 Access through Console Port.....................................................................................23
7.2 Access through Telnet ...............................................................................................25
7.3 Access through Web..................................................................................................26
8 Basic Features and Specifications....................................................................................27

Product Overview
1
1 Product Overview
The switch is mainly used in industrial environments where the reliability of communication
networks is extremely high. It supports zero-packet loss redundancy protection technologies
Parallel Redundancy Protocol (PRP) and High-availability Seamless Redundancy (HSR).
With PRP and HSR, the data is replicated and transmitted for seamless recovery when a link
failure occurs, so that no packet loss occurs, and network transmission reliability is
improved.
Ruby3A supports DIN rail mounting and panel mounting. For details, see the following table.
Table 1 Models
Models
Ruby3A-3G-L2-L2
Ruby3A-3G-HV
Code definition
Code option
Ports
3G
Note:
3G ： two HSR/PRP ports(2G combo) 100FX or 1000LX/SX 10/100/1000
Base-T(X), one Access port(1G combo) 100FX or 1000LX/SX 10/100/1000
Base-T(X)
Power input
L2-L2(24DCW，redundant power input)
HV(220AC/DCW)
Note：
For the product information listed in these tables, we reserve the right to amend it without notice.
To obtain the latest information, you can contact our sales or technical support personnel.

Structure and Interface
2
2 Structure and Interface
Caution:
It is recommended to purchase the port dustproof shield (optional) to keep ports clean and
ensure device performance.
2.1 Front Panel
Figure 1 Front Panel
(1) Power 1 LED
(2) Power 2 LED
(3) Running LED
(4) Operation mode LED
(5) Alarm LED
(6) Reset button
(7) Local port link status (8) Management port
(9) 10/100/1000Base-T(X) Ethernet Port connection status LED (green)
(10)10/100/1000Base-T(X) Ethernet port speed LED (yellow)
(11) HSR/PRP ports(2G combo) 100FX or 1000LX/SX 10/100/1000 Base-T(X)
(12) Local port(1G combo) 100FX or 1000LX/SX 10/100/1000 Base-T(X)

Structure and Interface
3
2.2 Top Panel
Ruby3A-3G-L2-L2 Top Panel
Figure 2 Ruby3A-3G-L2-L2 Top Panel
Ruby3A-3G-HV Top Panel

Structure and Interface
4
Figure 3 Ruby3A-3G-HV Top Panel

Mounting
5
3 Mounting
3.1 Dimension Drawing
Figure 4 Dimensions for DIN-Rail Mounting (unit: mm)
Figure 5 Dimensions for DIN-Rail Mounting (unit: mm)
Caution:
As part of the heat dissipation system, the switch housing becomes hot during operation.
Please use caution when coming in contact and avoid covering the switch housing when the