Kyocera KS7 User manual

Model KS7
KS7
MULTICRYSTAL
PHOTOVOLTAIC
MODULE
TYPICAL OUTPUT 7 Wp
HIGHLIGHTS OF KYOCERA PHOTOVOLTAIC MODULES
Kyocera´s advanced cell processing technology and automated production facilities have produced a highly
efficient multicrystal photovoltaic module.
These cells are encapsulated between a tempered glass cover and an EVA pottant with PVF back sheet to
provide maximum protection from the severest environmental conditions.
The entire laminate is installed in an anodized aluminium frame to provide structural strength and ease of
installation.
APPLICATIONS
Microwave / radio repeater stations Pumping systems for irrigation, rural
Electrification of villages in remote areas water supplies and livestock watering
Medical facilities in rural areas Aviation obstruction lights
Power source for summer vacation homes Cathodic protection systems
Emergency communication systems Desalination systems
Water quality and environmental data monitoring Recreational vehicles
systems Railroad signals
Navigation lighthouses, and ocean buoys Sailboat charging systems
SPECIFICATIONS
Electrical Specifications Physical Specifications
Maximum Power
7 Watts Length
304 mm
Maximum Power Voltage
16.9 Volts
Width
352 mm
Maximum Power Current
0.42 Amps Depth
22 mm
Open Circuit Voltage
21.5 Volts
Weight
1.8 kg
Short-Circuit Current
0.44 Amps
Note: The electrical specifications are under test conditions of Irradiance of
1 kW/m2, Spectrum of 1.5 air mass and cell temperature of 25ºC
SOLARTEC S.A.
Méjico 2145 – 1640 Martínez
Buenos Aires – Argentina
Tel: [phone]
Fax: [phone]/1381
[email protected]
www.solartec.com.ar
The contents of this catalogue are subject to change without prior notice for further improvement.