L.L.Bean 281386 User manual

07/28/2022 www.llbean.com
www.llbean.com
Product Support 1 800 341 4341
Care
This material is made of HDPE plastic
resin that has been purified and UV
protected. It is generally cared for and
cleaned with soap and warm water. For
certain stains and additional cleaning
power, a 1/3 bleach and 2/3 water
solution can be used on the product
without aecting the color. Also, a
popular method of cleaning is a high-
pressure power wash. (Not to exceed
1,500 psi, which is the equivalent of a
car wash.) The surface characteristics
of the product may require the use of a
soft bristle brush to get into the creases.
The hardware used in the assembly
and construction of our furniture is
18-8 stainless steel with an AlloChrome
3200+™ finish and a cosmetic coating,
providing a high level of corrosive
resistance.
A practical solution to signs of corrosion
is to wash the product with soap and
water, using a soft bristle brush to scrub
the corroding areas of the hardware.
Also, use appliance touch up paint in
the appropriate color to protect the
hardware. Appliance touch up paint can
be purchased at local hardware stores.
Assembly Instructions
Product Name *NO SKU*All-Weather Glider

1 2 3
4
TOOLS
5
PARTS
Thank you for purchasing our All-Weather Glider.
Assembly of this product requires a 4mm Hex Key
which is included.
We have found it helpful to have a second person
present in at least one step of the assembly.
x 4x 4
x 4x 4
x 9x 9
x 4x 4
x 2x 2
x 4x 4
x 2x 2
x 2x 2
x 2x 2
x 2x 2
Assembly tip for step 5:
Prop up one side of the bench at
least 2.5” for ease of assembly
Feet extensions should
be at the rear when
assembled
Installing the base backwards could result in the
glider tipping over unexpectedly
Use on level ground only
Repeat other side
Do not tighten screws
Tighten all screws