La Crosse Technology T73743 User manual

15-Inch Quartz
Indoor/Outdoor Clock
Model: T73743
DC: 081622
Made in China - Printed in China
Battery Requirements: 1 AA (IEC, LR6, 1.5V) required in the
Battery Compartment (Alkaline recommended)
Battery Life: 12 months
Temperature Range: 0ºF to 120ºF
Humidity Range: 10% RH to 90% RH
Dimensions: 15” x 2.12”
This product is warranted to be free from defects in material and
workmanship under normal use and service for a period of 1 year from the
date of sale to the customer.
Warranty will not apply to defects resulting from abuse, accidents, or misuse.
If a defect that is covered by this warranty arises during the warranty period,
promptly return the clock (postage prepaid) with proof of purchase showing
the date the clock was purchased to the following address and such defects
will be repaired, or the products will be replaced at La Crosse Technology,
Ltd option without charge.
La Crosse Technology, Ltd
Warranty Department
2830 South 26th Street.
La Crosse, WI 54601
Support: bit.ly/contact_techsupport
Patents: www.lacrossetechnology.com/pages/patents
Warranty & Support
Page | 4
Specifications

Care and Maintenance
Thermometer/Hygrometer
Power Up
1. Insert 1 fresh AA alkaline battery, according to polarity, into the
snug Battery Compartment.
2. Rotate the Time Set Wheel to set the time.
3. Mount on a wall and enjoy!
Note: The quartz movement
will keep the clock running
accurately. If the clock does not
operate, or steadily loses time,
replace the battery.
Time Set
Wheel
Battery
Compartment
AA
Learn more from our video: bit.ly/wallclock_setup
Movement Cover
OPEN: Turn the cover counterclockwise until the head is aligned
with the arrow. Then lift the cover o the clock.
CLOSE: Place the rubber weather seal and cover in the open
position and turn the cover clockwise until the head is back on top
and these lock into place.
Mounting
Indoor: Mount the clock on a wall using the hanging hole on the
back.
Outdoor: Choose a shaded location with an overhang to help
protect the clock from direct sunlight, rainfall, and other weather
elements. A fully shaded location will help prevent inaccurate
temperature readings. Use the hanging hole on the back to mount
the clock on a wall.
CLOSE
OPEN
OPEN
CLOSE
OPEN
CLOSE
• Always purchase the correct size and grade of battery most
suitable for intended use.
• Clean the battery contacts and also those of your clock prior to
battery installation.
• Ensure the battery is installed with correct polarity (+ and -).
• Remove battery from equipment when it is not used for an
extended period of time.
• Promptly remove an expired battery.
• The Clock has analog gauges that measures surrounding
temperature and humidity.
• The temperature information is displayed in degrees Fahrenheit
• The thermometer and hydrometer are precalibrated and self
adjusting and do not require a battery to operate.