La Crosse Technology 404-3624BL User manual

9.5 INCH WALL CLOCK
Model: 404-3624BL / 404-3624C
404-3624O / 404-3624R
DC: 121418
This product is warranted to be free from defects
in material and workmanship under normal use and
service for a period of 2 years from the date of sale
to the customer. Warranty will not apply to defects
resulting from abuse, accidents, or misuse. If a defect
that is covered by this warranty arises during the
warranty period, promptly return the clock (postage
prepaid) with proof of purchase showing the date the
clock was purchased to the following address and
such defects will be repaired, or the products will be
replaced at
La Crosse Clock Company option without charge.
La Crosse Clock Company
Warranty Department
2830 South 26th Street.
La Crosse, WI 54601
www.lacrossetechnology.com/support
WARRANTY & SUPPORT
Made in China - Printed in China
WARNING: This product can expose you to chemicals
including styrene, which is known in the State of California
to cause cancer. For more information go to:
https://www.p65warnings.ca.gov/

• Always purchase the correct size and grade of
battery most suitable for intended use.
• Clean the battery contacts and also those of
your clock prior to battery installation.
• Ensure the battery is installed with correct
polarity (+ and -).
• Remove battery from equipment when it is not
used for an extended period of time.
• Promptly remove an expired battery.
CARE & MAINTENANCE
• Battery Requirements: 1 AA (IEC LR6) required in
the movement (Alkaline recommended)
• Battery life: 12 months
SPECIFICATIONSPOWER UP
1. Insert 1 fresh AA battery into your clock
according to the polarity markings.
2. Turn the Time Set Wheel to set your time.
POSITION
Note: The quartz movement will keep the clock
running accurately. If the clock does not operate,
or steadily loses time, replace the battery.
• Mount your clock on a wall using the hanging
hole on the back of your clock.
Time Set
Wheel
Battery
Compartment AA