La Crosse Technology WT-3161WHx1 User manual

For information about WWVB, atomic time signal visit:
http://bit.ly/AtomicTime
Page | 4
WARRANTY INFO
La Crosse Technology, Ltd. provides a 1-year limited time warranty (from
date of purchase) on this product relating to manufacturing defects in
materials & workmanship.
La Crosse Technology, Ltd, 2830 S. 26th St., La Crosse, WI 54601
For Full Warranty Details, Visit:
www.lacrossetechnology.com/pages/warranty
Patents: www.lacrossetechnology.com/pages/patents
CARE + MAINTENANCE
Battery replacement instruction:
When batteries of dierent brand or type are used together, or new and old
batteries are used together, some batteries may be over-discharged due to
a dierence of voltage or capacity. This can result in venting,
leakage, and rupture and may cause personal injury.
• Always purchase the correct size and grade of battery suitable for the
intended use.
• Always replace the whole set of batteries at one time, taking care not to
mix old and new ones, or batteries of dierent types.
• Clean the battery contacts and those of the device prior to battery
installation.
• Ensure the batteries are installed correctly with regard to polarity
(+ and -).
• Remove batteries from product during periods of non-use. Battery leakage
can cause corrosion and damage to this product.
• Remove used batteries promptly.
• For recycling and disposal of batteries, and to protect the environment
please check the internet or your local phone directory for local recycling
centers and / or follow local government regulations.
CA WARNING:
This product can expose you to chemicals including acrylonitrile,
butadiene, and styrene, which are known to the State of California to
cause cancer and birth defects or other reproductive harm.
For more information, go to: www.P65Warnings.ca.gov
16” Inch
Atomic Wall Clock
Model: WT-3161WHx1
DC: 100522

Page | 3Page | 2
POWER UP
MANUALLY SET TIME
6
5
SET
RESET
WAVE (Atomic search)
Battery Compartment
Time Zone Selector
Daylight Saving
Time Selector
Hold the SET button for about 3 seconds.
• Press & Hold SET to move hands quickly.
• Press & release SET to move hands step by step.
Note: The Atomic Time Signal will override manual settings.
Reset: If the clock does not respond when trying to manually set
your time, press the RESET button.
4
3
2
1
JOIN THE CONVERSATION
Ask questions, watch detailed setup videos, and provide feedback
on our social media outlets!
1. Select Time Zone and DST settings.
2. Insert one, two, or three batteries into the Battery
Compartments.
3. The hands will move to the 12 o’clock position and search
for the WWVB Atomic Time Signal for up to 10 minutes.
• If no signal after 8-10 minutes, the clock will run from 12:00.
• Allow up to 5 nights to receive this transmission, the clock
will continue to search for the WWVB signal on its own.
4. For the best reception, place the clock on an exterior
wall near a window with the front or back of it facing Fort
Collins, CO.
Watch the setup video: bit.ly/wallclock_setup
Note: In certain areas, this clock may not be able to receive
the WWVB reception due to signal strength or interference.
In this case, your clock can be set manually until the Atomic
Time Signal can be received.
Battery Requirement: 1 AA (IEC LR6) in any compartment.
Not Included.
Battery Life:
1 Battery: Up to 2 years
2 Batteries: Up to 4 years
3 Batteries: Up to 6 years
Dimensions: 16” Diameter
SPECIFICATIONS
6
5
4
3
2
1
+
AA
AA AA
4
4
++